20140925 The FW version number is V0.0.1.72.31 New feature, 1. Fix scan menu "ATV-2/3/4M" selection not memorized 2. Update QIG about flash kit for firmware update 20140916 The FW version number is V0.0.1.72.30 New feature, 1. Recording failure with PCR PID different from Video PID 20140909 The FW version number is V0.0.1.72.29 New feature, 1. Delete recordings, Menu-> Multimedia->Movie-> Click on "Red" Key to delete the selected file 20140902 The FW version number is V0.0.1.72.27 1.Fix MENU, SW update auto reboot 2.Signal OSD reposition for overscan fix 3.Firmware update , DELETE ¡§dtv_temp.img¡¨if exists before renaming 4.PATPMT Mismatch options, Disable: no PAT/PMT mismatch check. a.Rescan b.Warning c.Disable 5.When service cleared, if unlock -> lock will do rescan 20140829 The FW version number is V0.0.1.72.24 1.New condition check for PAT.PMT mismatch: PMT PID, Video PID and Audio PID 2.New options in menu "Settings"->"Display Preference" 2.1 OSD option for Provider name, Service name, signal strength, SNR 2.2 A new option to enable/disable auto scan when PAT/PMT mismatch 3. Fix "No Service" issue when PAT TSID and SDT TSID are mismatch -- 4.Don¡¦t check PAT version code 5.OSD option in ¡§Display Preference¡¨, when enabled, showing service name, ,signal strength in dBm, and SNR in dB 6.When recording, OK key is disabled 20140729 The FW version number is V0.0.1.72.16/18/19 1. Auto scan previous frequency/bw when channel list corruptted 20140722 The FW version number is V0.0.1.72.15 1. Dynamic detect PAT/PMT change 20140718 The FW version number is V0.0.1.72.14 1. Remove password for "Reset to Default" 20140718 The FW version number is V0.0.1.72.13 (Test version) 1. Remove password for "Reset to Default" 2. Do not load archived configuration after boot 20140707 The FW version number is V0.0.1.72.12 1. Remove antenna power setting 20140704 The FW version number is V0.0.1.72.11 1. Show FFT size in simple signal statistics 20140627 The FW version number is V0.0.1.72.10 1. Recording feature:"Red" key to start/stop recording on SD card. 20140624 The FW version number is V0.0.1.72.9 1. Modify the way to handlie "PAT/PMT" changed, as A. Prompt "PMT/PAT mismatched, channel will be rescanned in 10 seconds, OK:scan now Cancel:abort" B. If no user input in 10 seconds, it will scan the channel again automatically. C. If user clicks OK, the same behavior as before" D. If user clicks cancel, clear the OSD message, and nothing changed. The FW version number is V0.0.1.72.7 1. move¡§weak signal¡¨OSD to upper-right 2. Signal statistics: Signal strenght dbm * and * SNR * 3. Manual scan, up/down key reversed 4. Same frequency but different BW, should be taken as differernt services 20140611 The FW version number is V0.0.1.72.6 1.Manual scan 6-8MHz, press OK, fail to start scan 2.Manual scan frequency not show correctly 20140609 The FW version number is V0.0.1.72.5 1. If channel is lock but fail to play because (PMT changed), prompt and switch to manual channel scan 2. Added Edit Frequency icon in Manual Scan window. 3. RC-typeB power button for 576i mode display. 4. Fix PAL/NTSC mode switch fails when HDMI not attached or not support. 20140603 The FW version number is V0.0.1.72.2 1. Simple signal statistics, background transparent 2. strapping ¦b 2/3/4 MHz, signal statistics, Bandwidth is wrong. 3. 5/6/7/8 MHz, manual scan Bandwidth, add 5 MHz option 4. Manual channel scan prompt message remove (as I told you previously) 20140528 The FW version number is V0.0.1.72.0 1. Press the "Green"/"Yellow" key to hide signal statistics. 2. Refresh screen in manual scan start 3. Update simple signal statistics UI. 20140526 The FW version number is V0.0.1.71.7 1. Show TPS in manual scan 2. When watching TV, press the "Green" key to pop up simple signal statistics. 20140517 The FW version number is V0.0.1.71.6 1. When input the frequency in manul scan manu, you may click on "Yellow" key to input the frequency by arrow keys. 2. Before manual scan starts, it will prompt to clear the old service list (to prevent skipping scanned channel service due to TSID/SID/ONID duplication). 3. When watching TV, press the "Yellow" key to pop up signal statistics. 20140508 1. The FW version number is V0.0.1.71.6_test 2. A trial version for not play service automatically, but pop up menu 20140506 1. The FW version number is V0.0.1.71.5 2. ATV-2/3/4M Channel list: 437M/2M added 3. Rename dtv.img to dtv_tmp.img when firmware is updated 4. When firmware update the LED shows 88, and turn off when update is done.