Ref. Price : US$646.92

Typical PA bandwidth sweep...

Bandwidth : 2200......2500MHz

Gain >50dB & 40,0W output  

Small signal gain : >54dB 

CW mode output : up to 40,0 Watt  

Output port protected by circulator

INP - OUT - RFmonitor conector : SMA female

RFinput power max. 2mW

Voltage : 24....30 Volt Typical 28V Icc 4 Amper max.

Application: Amplification of signals with all types of modulation. Very suitable for transmitters with very low RF transmission output power ( under 1mW output ) , such as Adalm Pluto or similar toys.

Ref. Price : US$235.44

Excellent 13cm UP converter for SSB  CW  FM  FM-ATV  DVB

Good for QO-100 , first geostationary satellite with HamRadio transponder 

Product video: https://www.youtube.com/watch?v=ddjgcbQkTGc 

Technical info: https://oe7dbh.blogspot.com/2023/12/2400-mhz-upconverter-bu500.html 

BU500 specification:

RF-in : 100~1300Mhz

Local Oscillator: Default:1968MHz for 70cm IF signal

–1050MHz to 2700MHz

(configurable by customer in 1Khz step)

Local Oscillator TK stability 2.5ppm( -30°…+75°C)

     (for even more stability: external 10MHz input is available )

RF-output: 2365~2500MHz

Conversion Gain > 34dB

Output power: 1700mW (SSB CW FM ATV FMATV)

                                200mW (DVB-T DVB-S)

DC power adaptor: 12V 1A  (9V……13.8V)

For the Rx <--->Tx switch, please use IF signal !!!

-15dBm and +20dBm IF version (please check your version before using it)

Version 1 for multi-mode SSB CW FM ATV D-ATV      .....with input around -15dBm 

Version 2 for SSB CW FM ...with input around + 20dBm   ( attenuator on PCB included ) 

Please note the version you would like to buy.