# HiDes Technology Co., Ltd. (和迪科技股份有限公司)

> 300+ km ultra-long-range HD video & data broadband links for UAVs and USVs

Founded in 2012, HiDes Technology is built on an engineering team with over 20 years of experience developing and integrating COFDM wireless communication products, applied across consumer, industrial, public-safety, maritime and aerospace fields, with customers worldwide.

Site: https://hides.com.tw/ (Traditional Chinese) · https://hides.com.tw/en/ (English)
Contact: info@hides.com.tw (sales) · support@hides.com.tw (technical) · +886-2-2917-2417

This file is generated at build time from the same data that renders the
pages, so every figure below also appears on the linked page.

## Products — COFDM long-range links

### ETL-210A — COFDM Ethernet-over-Air Adapter

Page: https://hides.com.tw/en/products/etl-210a/ · https://hides.com.tw/products/etl-210a/ (zh)

The ETL-210A is a bidirectional COFDM Ethernet-over-Air transceiver for long-range UAV and USV links, field-verified at distances beyond 500 km with up to 26.8 Mbps in each direction (64QAM) over independent uplink and downlink channels. The base unit tunes from 100 to 2500 MHz in 1 kHz steps, with custom bands available from 100 MHz to 6 GHz, and secures traffic with AES-128/AES-256 encryption. Its COFDM ASIC, firmware and boards are designed and manufactured in Taiwan.

Key specs: 300+ km full-duplex · 26.8 Mbps ×2 · AES-128/256

- Field-verified range: 500+ km
- Full-duplex data rate (64QAM): 26.8 Mbps ×2
- High-speed mobile reception: 1,000+ km/h
- Startup time: 5 s

Features:
- With a high-power amplifier, achieves 300+ km full-duplex range
- Supports high-speed reception at over 1,000 km/h
- Independent uplink/downlink channels (FDD) — stealthy, strongly jam-resistant
- Transparent bidirectional Ethernet plus RS-232/RS-485/S.BUS/UART
- Military-grade AES-128 / AES-256 encryption
- Full-duplex and broadcast dual mode — in broadcast mode, unlimited simultaneous RVT (Remote Video Terminal) receivers
- Active tracking-antenna integration with dynamic auto north-finding
- Flexible custom bands from 100 MHz to 6 GHz

RF parameters:
- RF frequency (base): 100–2500 MHz · 1 kHz step
- Bandwidth: 1 / 2 / 2.5 / 3 / 4 / 5 / 6 / 7 / 8 MHz
- Modulation: COFDM · FFT 2K/4K/8K
- Constellation: QPSK / 16QAM / 64QAM
- Code rate: 1/2 · 2/3 · 3/4 · 5/6 · 7/8
- Guard interval: 1/4 · 1/8 · 1/16 · 1/32
- Digital attenuator: 0 to −47 dB · 1 dB step

Receiver performance:
- Max input: > +5 dBm
- Sensitivity @2 MHz: < −96 dBm
- Sensitivity @8 MHz: < −90 dBm
- Mobility: TU6 / RA6 / Doppler performance

Transmitter performance:
- MER: > 39 dB @470–950 MHz
- Spectrum shoulder: > 48 dB
- Phase noise: < −114 dBc @100 kHz
- Carrier suppression: > 42 dB

System:
- Data rate: 528 kbps – 26.8 Mbps
- Connectors: SMA 50 Ω ×1 · RJ-45 ×2 · UART/RS-232 ×2
- Encryption: AES-128 / AES-256
- Power: DC 12–30 V · 550 mA–3 A (by PA)
- Operating temp.: −40 °C ~ 70 °C
- Dimensions / weight: 200 × 135 × 70 mm · 1160 g (w/ 10 W PA)
- Compliance: IEEE 802.3af/at · RoHS

Ordering:
- ETL-210A-B: Base module (w/o PA/filter)
- ETL-210A-PATV: Optimized 400–800 MHz · built-in 200 mW PA
- ETL-210A-PA2.4G: Optimized 2.2–2.4 GHz · built-in 8 W PA (39 dBm)

Note: Band support: 315/433/866/900 MHz and 1.2/2.4/3/4/5.8 GHz; custom uplink/downlink channels on request. Higher-power amplifiers available for 300+ km applications.

### FV-800 / FV-810 — Long-Range FPV Video & Data Link

Page: https://hides.com.tw/en/products/fv-800/ · https://hides.com.tw/products/fv-800/ (zh)

The FV-800 is a COFDM Full-HD FPV video and C2 data link that reaches 300+ km line-of-sight with an 8 W power amplifier and tracking antenna, carrying up to 16 Mbps of video plus a dedicated full-duplex C2 telemetry channel at up to 230.4 kbps. Video bands span 2000–2500 MHz (FV-810: 2100–2700 MHz; custom 400 MHz–2.7 GHz), with AES-128/AES-256 encryption. Its broadcast capability makes it an ideal RVT source — unlimited receivers can watch the live feed simultaneously (e.g., ATAK terminals).

Key specs: 300+ km · FDD Full-Duplex · AES-128/256

- 8 W PA + tracking antenna (LOS): 300+ km
- COFDM video channel: 16 Mbps
- C2 duplex air rate: 230.4 kbps
- Mesh nodes (swarm): 16+

Features:
- Wide tunable range (400+ MHz) with professional-grade MER
- Dynamic channel switching — remote on-the-fly retune to dodge jamming
- Selectable bandwidth 2–8 MHz
- Transparent UART / S.BUS / RS-232 / RS-485 / Ethernet
- AES-128 and AES-256 anti-eavesdropping encryption
- Standard RTSP / RTP unicast & multicast video
- Mesh networking with 16+ nodes for swarm applications

COFDM RF transmitter:
- Frequency: FV-800: 2000–2500 MHz · FV-810: 2100–2700 MHz · 1 kHz step
- Bandwidth: 2 / 3 / 4 / 5 / 6 / 7 / 8 MHz
- FFT: 2K / 4K / 8K
- Code rate / GI: 1/2–7/8 · 1/4–1/32
- Customization: 400 MHz – 2.7 GHz

C2 data link:
- Frequency: 470–490 / 500–520 / 1200–1300 MHz
- Bandwidth: 150 kHz @115.2 kbps · 250 kHz @230.4 kbps
- Modulation: 2/4 (G)FSK · OQPSK DSSS · (G)MSK · OOK
- Output power: Up to 37 dBm (5 W)

System:
- Interface: RJ-45 · UART / RS-232 / RS-485 / S.BUS
- Power supply: 9–30 V DC
- Weight: Aloft 280–850 g (by PA) · ground 240 g
- Operating temp.: −10 °C ~ 60 °C

Range (LOS):
- 1 W PA: Omni >20 km · patch >30 km · tracking antenna >120 km
- 2 W PA: Omni >25 km · patch >40 km · tracking antenna >160 km
- 8 W PA: Omni >40 km · patch >70 km · tracking antenna 300+ km

Ordering:
- FV-800-2025A470B: 2000–2500 MHz · C2 470–490 · PA 1 W / 2 W
- FV-800-2025B470E: 2000–2500 MHz · C2 470–490 · PA 2 W / 5 W
- FV-800-2225H470E: 2250–2500 MHz · C2 470–490 · PA 8 W / 5 W
- FV-810-2127A470B: 2100–2700 MHz · C2 470–490 · PA 1 W / 2 W
- FV-810-2127A1200B: 2100–2700 MHz · C2 1200–1300 · PA 1 W / 2 W

Note: PA codes: A=1W · B=2W · E=5W · H=8W. Higher-power amplifiers available for ultra-long-range applications.

### HAT-110 — Auto-Tracking Antenna

Page: https://hides.com.tw/en/products/hat-110/ · https://hides.com.tw/products/hat-110/ (zh)

The HAT-110 is a ground-station auto-tracking antenna that parses MAVLink packets from the remote UAV or USV to steer azimuth and elevation automatically, with a maximum tracking range beyond 300 km, continuous 0–360° pan, 0–90° tilt and a 10 kg antenna payload. Built-in RTK-based north finding simplifies deployment and keeps tracking accurate even from a mobile ground station, working alongside the FV-800 and ETL-210A transceivers. Its control board is designed and built by HiDes in Taiwan.

Key specs: >300 km Tracking · 360° Pan · RTK North-Finding

- Max tracking range: >300 km
- Continuous pan: 360°
- Max antenna payload: 10 kg
- Auto north-finding: RTK

Features:
- Parses MAVLink packets; automatic azimuth/elevation steering
- Built-in RTK auto north-finding — deploy from mobile ground stations
- MAVLink / UDP / HTTP controller protocols
- Stepping-motor drive system (Oriental Motor, Japan)

Specifications:
- Interface: RJ-45 (4-pin) · power 4-pin (up to 3 A) · spare 4-pin
- Power: 24 V DC · peak 2.31 A (56 W)
- Coverage: Pan 0–360° continuous · tilt 0–90°
- Speed: Pan >25°/s · tilt >15°/s
- Torque: > 3 kgf·m
- Max payload: 10 kg
- Max tracking range: > 300 km
- Weight: < 7 kg (w/o antenna & tripod)
- Operating temp.: −10 °C ~ 60 °C

### HRM-110 — Narrow-Band Radio Modem

Page: https://hides.com.tw/en/products/hrm-110/ · https://hides.com.tw/products/hrm-110/ (zh)

The HRM-110 is a narrow-band radio modem for UAV and USV telemetry, command and control, with reported range exceeding 300 km and a maximum air data rate above 200 kbps. Optimized bands cover 470–490, 500–520, 1200–1300 and 2400–2800 MHz (custom 100 MHz–6 GHz), with frequency hopping and AES-256 encryption. Transparent UART ports are compatible with MAVLink, Modbus and Pelco protocols.

Key specs: 300+ km · 200+ kbps · AES-256 · FHSS

- Reported range: 300+ km
- Max air data rate: 200+ kbps
- Built-in PA: 4 W
- Weight w/ enclosure: 145 g

Features:
- Transparent UART — MAVLink, Modbus-RTU/ASCII, Pelco-P/D
- S.BUS interface; simultaneous MAVLink + S.BUS RC
- Frequency hopping; programmable channel & bandwidth (50–500 kHz)
- Point-to-point, point-to-multipoint, store-and-forward repeater
- AES-256, 32-bit CRC, selectable FEC with retransmission

RF parameters:
- Frequency (1 kHz step): 470–490 / 500–520 / 1200–1300 / 2400–2800 MHz
- Custom band: 100 MHz – 6 GHz · PA 1–30 W
- Modulation: 2/4 (G)FSK · OQPSK DSSS · (G)MSK · OOK
- Output power: Up to 36 dBm (4 W)

System:
- Data rate: Up to 200+ kbps
- Connectors: IPEX & SMA 50 Ω · UART · S.BUS · RS-232/422/485
- Power: DC 9–35 V · Rx 1 W · Tx@36 dBm 12.5 W
- Dimensions / weight: 105 × 65 × 28 mm · 145 g
- Operating temp.: −10 °C ~ 70 °C

### EOA-130 — Miniature Ethernet-over-Air Adapter

Page: https://hides.com.tw/en/products/eoa-130/ · https://hides.com.tw/products/eoa-130/ (zh)

The EOA-130 is a miniature 57 × 42 mm, 70 g COFDM Ethernet-over-Air module for UAV/USV FPV video, data and C2 links, delivering 50+ Mbps peak throughput and up to 40+ km with directional antennas in the dual-PA 2T2R configuration. Its optimized band spans 2200–2600 MHz (custom 100 MHz–6 GHz) with AES-128/AES-256 encryption. Dynamic channel switching — manual on-the-fly or automatic, signal-quality driven — keeps the link alive in contested spectrum.

Key specs: 50+ Mbps · 2T2R · P2P / P2MP / Mesh

- Peak throughput: 50+ Mbps
- Directional antennas + 2T2R: 40+ km
- Board size: 57×42 mm
- Bare board w/ cables: 70 g

Features:
- Channel bandwidth 2.5 / 5 / 10 / 20 / 40 MHz
- Dynamic channel switching: manual on-the-fly or automatic
- Optional split up/down frequencies vs directional jamming
- P2P / P2MP / Mesh topologies
- Transparent Ethernet and UART/S.BUS links
- AES-128 / AES-256 encryption

RF parameters (preliminary):
- Frequency (1 kHz step): 2200–2600 MHz · custom 100 MHz–6 GHz
- Bandwidth: 2.5 / 5 / 10 / 20 / 40 MHz
- Constellation: BPSK / QPSK / 16QAM / 64QAM
- Code rate: 1/2 · 2/3 · 3/4 · 5/6
- Output power: 30 dBm (1 W) ×1 / ×2 (2T2R)

System (preliminary):
- Data rate: Up to 50+ Mbps
- Connectors: IPEX & SMA 50 Ω · RJ-45 · UART
- Power: DC 9–35 V · Rx 0.14 A @12 V
- Dimensions / weight: 57 × 42 mm × 2 boards · 70 g
- Operating temp.: −10 °C ~ 70 °C

Range (estimated):
- 5 dBi omni: 6 km (1 W) · 8 km (2T2R)
- 14 dBi patch: 15 km (1 W) · 20 km (2T2R)
- 21 dBi dish + tracking: 30+ km (1 W) · 40+ km (2T2R)

Note: Specifications are the June 2026 preliminary release; production specs subject to the final document.

### HS-100 — Ethernet Switch Board

Page: https://hides.com.tw/en/products/hs-100/ · https://hides.com.tw/products/hs-100/ (zh)

The HS-100 is a compact four-port 10/100 Mbps Ethernet switch board built around the IC Plus IP175B integrated switch controller. Within a 42 × 42 mm footprint it delivers four independent 10BASE-T/100BASE-TX ports complete with on-board magnetics, so a full switching fabric can be embedded directly into a UAV, USV, robot or industrial enclosure without adding a separate switch module. The switch runs unmanaged straight out of reset using hardware strapping — no EEPROM required — and a host MCU can take full control at any time through the SMI header. A single wide-range 5–30 V DC input with reverse-polarity protection covers 2S–6S battery packs and 12 V/24 V vehicle rails directly. Designed, fabricated and assembled in Taiwan on a Taiwan/US/Japan semiconductor BOM.

Key specs: 4 × 10/100 · 42 × 42 mm · 5–30 V

- 10/100 ports, on-board magnetics: 4 ×
- Four-layer board size: 42×42 mm
- Typical power (12 V / 0.142 A): 1.7 W
- Wide-range DC input: 5–30 V

Features:
- Non-red supply chain: Taiwan/US/Japan semiconductors, made entirely in Taiwan
- No components from entities listed under NDAA Section 889
- 4 × 10BASE-T/100BASE-TX, auto-negotiation, Auto MDI/MDI-X
- Non-blocking store-and-forward fabric, 2 K MAC address table
- Up to 16 IEEE 802.1Q VLANs, 4 priority queues per port
- On-board 1:1 magnetics per port, 1500 Vrms isolation
- Unmanaged by default, no EEPROM; optional host management over SMI
- Traceable BOM with approved vendor list and per-lot country-of-origin declarations

Ethernet switch:
- Switch controller: IC Plus IP175B, QFN-68
- Ports: 4 × 10BASE-T/100BASE-TX (MDI), IEEE 802.3/802.3u/802.3x
- Speed / duplex: 10/100 Mbps, half or full duplex, auto-negotiation, Auto MDI/MDI-X
- Switching: Store-and-forward, non-blocking; 2 K MAC address table
- VLAN: Up to 16 groups, IEEE 802.1Q port- and tag-based, QinQ
- QoS: 4 queues per port, WRR/WFQ/SP; per-port rate control
- Other functions: Hardware IGMP v1/v2 snooping, port mirroring, storm protection, loop detection, STP/RSTP/MSTP
- Management: SMI (MDC/MDIO); default configuration by hardware strapping
- Magnetics: 1:1, 1500 Vrms isolation, one per port

Power, mechanical and environmental:
- Power input: 5–30 V DC, reverse-polarity protected, 500 kHz synchronous buck
- Power consumption: 1.7 W typical (0.142 A at 12 V), all four ports linked at 100 Mbps
- Connectors: LAN 1–4: 8-pin wafer, 1.25 mm (RJ-45 MDI pin order); SMI 3-pin · DC in 4-pin
- Indicators: 4 × Link/Activity (green), power (green)
- Dimensions: 42 × 42 × 1.62 mm, 4-layer PCB; 4 × Ø2.1 mm mounting holes on a 37.8 × 37.8 mm pattern
- Weight: Approx. 10 g — bare board, preliminary
- Operating / storage: Operating 0 °C to 70 °C, max 95 % RH (non-condensing); storage −40 °C to 85 °C
- Compliance: IEEE 802.3 / 802.3u / 802.3x, RoHS

Non-red supply chain and Taiwan manufacturing:
- Ethernet switch controller: IP175B — IC Plus Corp. (Taiwan)
- Schmitt-trigger inverter: SN74LVC2G14 — Texas Instruments (USA)
- Step-down converter: LMR51430 — Texas Instruments (USA)
- ESD protection array: RCLAMP0551P — Semtech (USA)
- Passives: Yageo, Walsin (Taiwan); Panasonic precision resistors (Japan)
- Printed circuit board: 4-layer FR-4, 1.62 mm — qualified PCB fab (Taiwan)
- Assembly and test: SMT, reflow, AOI, functional test, packing — all in Taiwan

Note: Specifications are the August 2026 preliminary release; production specs subject to the final document. Full manufacturer declarations, country-of-origin certificates and lot traceability records are available on request, as is custom BOM screening to a customer-specific restricted-supplier list.

### Modules

- **HS-100** — 4-port 10/100 Ethernet switch board — on-board magnetics, 42 × 42 mm. The only cost-effective Ethernet switch board on the market built to a non-red BOM.
- **HV-130** — COFDM 1080p FHD video-link receiver module
- **HV-320** — COFDM 1080p video-link module — RF out, HDMI/CVBS in
- **HV-330** — COFDM 1080p video-link module — RF out, HDMI/CVBS in
- **HV-380** — COFDM 1080p video-link module — RF/Ethernet-RTP out, HDSDI/RTP in
- **HRM-100** — Telemetry radio modem — transparent UART/RS-232/RS-485 duplex module
- **EOA-120** — 900 MHz low-power compact video/data-link module — transparent Ethernet/UART

All products: https://hides.com.tw/en/products/

## Solutions

### Elevator IoT Digital Monitoring Solution

Page: https://hides.com.tw/en/solutions/elevator/ · https://hides.com.tw/solutions/elevator/ (zh)

Upgrade analog elevator monitoring to HD video, digital video intercom and real-time elevator telemetry — over the cables already in the shaft, with no re-wiring of the car.

Conventional elevator monitoring pulls analog video and intercom audio through long traveling cables: image resolution is limited, calls are noisy, and the emergency button often rings only in an unmanned machine room. Aged cabling with splitters hidden in inaccessible corners makes fault-finding genuinely hard.

The camera, video intercom and elevator data acquisition in the car reach the IP network over a single existing coaxial cable — no traveling-cable replacement.

System components:
- **ETL-210C — Coax HD transmission box**: ETL (Ethernet Transparent Link) applies HiDes' core COFDM technology to run a transparent Ethernet link over a single existing coaxial cable — HD video, two-way intercom and control data together. Reaches up to 500 m over 3C2V coax, so an HD upgrade needs no replacement of the elevator traveling cable.
- **EAD — Elevator data acquisition unit**: The EAD (Ethernet elevator data acquisition unit) taps the elevator controller's signals for live floor position, direction, door state and safety-circuit status. Each EAD is an independent IP node on an open Modbus architecture, ready to integrate with industrial monitoring; on any anomaly it logs the time, elevator ID, floor, cause and the controller logic waveform, with built-in self-test and scheduled-test functions. It also accumulates maintenance data — daily running hours, per-floor usage, door open/close counts, slow-close counts — supporting ride-quality and utilization analysis.
- **IP/SIP — Digital video emergency intercom**: Fully digital audio-video intercom replaces the analog handset: two-way calling, preview monitoring and full-call recording, with emergency-button events tied to NVR footage for easy retrieval. Every intercom station is an independent IP node; answering stations can be added anywhere the network reaches, and staff phones can answer emergency calls and receive button-event notifications over 4G/Wi-Fi.
- **CMS — Monitoring platform**: A web-based management platform with per-user permissions and full action logging. The overview page lists every elevator's floor, direction, status and active faults; the per-elevator page combines live video with complete state; the connection page watches the health of every device on the network — NVRs, intercoms, EADs, cameras. Eleven event and anomaly types are recorded, with statistics charts and printable reports.
- **S-Box — Analog integration gateway**: Where re-cabling isn't yet an option, the S-Box parallels the existing analog emergency intercom, bridging analog audio and AHD/CCTV video into SIP video intercom and RTSP/ONVIF streams: it dials out over SIP when the call button rings, or reaches landlines and mobiles via FXO. Nothing changes inside the car, the legacy analog intercom and CCTV keep working in parallel — and the same approach upgrades emergency intercoms in factories, car parks, campuses and care facilities.

Benefits:
- HD upgrade over existing cables — simple works, sharply lower cost
- Fully digital audio and video: clear calls, far better image quality
- Emergency calls never go unanswered: multiple stations plus mobile answering
- Every device is an independent IP node, managed and tested remotely
- Open Modbus standard integrates with existing industrial monitoring
- Legacy analog systems keep running in parallel — migrate in stages

Deployed and in service across Chang Gung–affiliated hospitals and Formosa Plastics Group facilities.

## Technology

Page: https://hides.com.tw/en/technology/ · https://hides.com.tw/technology/ (zh)

COFDM (Coded Orthogonal Frequency-Division Multiplexing) is the most robust audio-video transmission protocol — designed for distance, multipath and high-speed motion, and the international standard behind digital TV broadcasting.

- **Immunity to noise & interference**: Built-in error-correction coding (ECC/FEC) gives high immunity to noise and interference — damaged data is recovered on the fly.
- **Robust against multipath fading**: Multi-carrier modulation resists the frequency-selective fading caused by terrain and building reflections, keeping links alive even in NLOS environments.
- **High-speed mobile reception**: Adaptive channel estimation and frequency-domain equalization track fast-changing channels — proven at 350 km/h jet FPV and 1.0 km/s sounding-rocket trials.

Anti-jamming architecture:
- **Wide tunable frequency range**: 100 MHz–6 GHz band support — relocate the whole link away from contested spectrum.
- **Dynamic channel switching**: Manual on-the-fly retuning, or automatic switching driven by signal-quality monitoring — without dropping the link.
- **Split up/downlink (FDD/FDM)**: Protects the command receiver — the uplink frequency never leaks with the strong downlink.
- **C2 hopping & spread spectrum**: The narrow-band C2 channel supports FHSS/DSSS and background spectrum scanning.
- **Military-grade encryption**: AES-128 / AES-256 against eavesdropping and injection.
- **Primary–secondary redundancy**: Dual-link architecture fails over to a backup band when the primary is suppressed.

FAQ:
- **What is COFDM?** COFDM (Coded Orthogonal Frequency-Division Multiplexing) is a multi-carrier modulation technique with built-in error-correction coding, designed for long distance, multipath and high-speed motion. It is the most robust audio-video transmission protocol and the international standard behind digital TV broadcasting: the signal is spread across many subcarriers, and channel coding recovers data damaged in transit.
- **Why is a COFDM link resistant to jamming?** The resistance comes from link architecture and spectrum agility. Video downlink and command uplink run on separate frequencies (FDD/FDM); the one-way broadcast downlink needs no acknowledgment, and the ground receiving station transmits nothing — silent and hard to direction-find — so an adversary cannot tell which uplink frequency to jam. Combined with a wide tunable range from 100 MHz to 6 GHz, dynamic channel switching, FHSS/DSSS spread spectrum on the C2 channel and AES-128/AES-256 encryption, the link keeps operating in contested spectrum.
- **What are the advantages in multipath (echo) transmission?** Multipath echoes from terrain, buildings and the sea surface are fatal interference for traditional single-carrier microwave links — COFDM absorbs and repairs them instead: the guard interval soaks up the timing differences of reflected signals, and error-correction coding recovers subcarriers that land on faded frequencies. That is the advantage: in the mountainous, maritime and urban non-line-of-sight environments where ordinary links fail, COFDM keeps video and data flowing — the key to long-range operation over complex terrain.

## Ham Radio / DATV catalog

HiDes' COFDM expertise is rooted in digital television. For over a decade our DVB-T transmitters and receivers have served the worldwide DATV community — Easy HD Expressway!

Section: https://hides.com.tw/en/ham/ · Catalog: https://hides.com.tw/en/ham/catalog/
Starting with the UT-100 USB DVB-T transceiver, HiDes put affordable HD digital television on the amateur bands. We exhibited at HAM RADIO Friedrichshafen — Europe's largest amateur radio fair (booth D037 in 2018, D038 in 2019) — and remain active in the ham community. Narrow-band 1 MHz DVB-T is a signature capability of our gear, fitting digital video into tight amateur allocations.

The BU-500 13 cm up-converter shifts 100–1300 MHz up to 2365–2500 MHz, supports SSB / CW / FM / FM-ATV and DVB modes with a freely adjustable local oscillator — built for AMSAT QO-100 (Es'hail-2), the first geostationary amateur transponder.

Availability: Availability varies by model — current-production gear is in the eBay store, and every page links to its original write-up on the old site.

### 01 · DVB-T Modulator Adaptor (3)

#### PT-100 — PCIe 4-Channel DVB-T Modulator

Page: https://hides.com.tw/en/ham/catalog/pt-100/ · https://hides.com.tw/ham/catalog/pt-100/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_pt100_eng.html (archive, noindex)

4-channel DVB-T transmission on a PCIe x1 card

The PT-100 is a PCIe adapter board supporting 4-channel EN 300-744 DVB-T transmission. It performs full hardware modulation with no host CPU computation required, and is powered from the PCIe bus or optionally from an external DC adapter.

Key specs: 50~950 MHz, step size 1 KHz · 2/3/4/5/6/7/8 MHz bandwidth · PCIe x1, 4-channel DVB-T

Features:
- PCIe adapter board supports 4-channel EN 300-744 DVB-T transmission.
- Powered from the PCIe bus or optionally, an external DC adapter.
- Full hardware modulation, no host CPU computation required.
- **Modulator (Transmitter)** — Direct digital conversion to 50~950MHz for excellent signal quality · PT-100 supports configurable bandwidth from 2MHz to 8 MHz · Support only non-hierarchy mode · Programmable digital attenuator · Free Windows Stream Player · Free Windows and Linux SDK
- **Applications** — DVB-T signal generator · Demonstrations · Research and development · Video Broadcast/Distribution · Digital Signage · Wireless Display · Hotel TV, Hospital TV, On-Board TV, Luxury Home Entertainment · Hotel Info TV, Trade Shows, Mall Info TV, Campus TV, In Stadium · Live Sports, Monitoring, Surveillance, Corporate TV · Industrial Monitoring · Amateur HAM TV
- **Host requirements** — CPU: Intel, AMD, ARM, MIPS · 128MB RAM of system memory or above · Higher CPU and memory required if DVB-T audio/video decoding is needed. · One available PCIe 1x port

- RF Connector: One BNC connector
- Bandwidth: 2/3/4/5/6/7/8 MHz
- FFT: 2K, 8K
- Constellation: 64QAM/16QAM/QPSK
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 50~950MHz step size 1KHz
- RF Output Level: -8 dBm (100 dBuV)
- Digital Attenuator: Range:+6/-25dB*, Step size 1dB
- MER: 50~950MHz, 35dB Typically
- Spectrum Shoulder (Adjacent channel): 45dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB
- PCIe: x1
- Power: PCIe bus power / 3.3V 460mA / 12V 250mA
- Dimensions (LxW): 97 x 82mm

Note: There could be MER loss in high gain/attenuation level.

#### UT-210 — USB DVB-T/ISDB-T Modulator

Page: https://hides.com.tw/en/ham/catalog/ut-210/ · https://hides.com.tw/ham/catalog/ut-210/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_ut210_eng.html (archive, noindex)

USB based modulator with support for EN 300 744 DVB-T and ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb transmission. Powered from the USB bus, so no external power adapter is required, with full hardware modulation and professional grade modulation error rate (MER).

Key specs: 100–2500 MHz · 2/3/4/5/6/7/8 MHz bandwidth · DVB-T / ISDB-T

Features:
- USB based modulator/demodulator with support for EN 300 744 DVB-T and ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb transmission.
- Powered from the USB bus, so no external power adapter is required.
- Full hardware modulation/demodulation, no host CPU computation required.
- Professional grade modulation error rate (MER).
- **Modulator (Transmitter)** — Direct digital conversion to 100..2500 MHz for excellent signal quality · Standard 2/3/4/6/7/8 MHz bandwidth · ISDB-T Layer mode supported: 1-layer (13-seg) and 2-layer (12+1 seg) · No time-interleaver support in ISDB-T mode · Programmable digital attenuator · Free Windows Stream Player · Free Windows and Linux SDK
- **Applications** — DVB-T/ISDB-T/-Tb signal generator · Demonstrations · Research and development · Video Broadcast/Distribution · Digital Signage · Wireless Display · Hotel TV, Hospital TV, On-Board TV, Luxury Home Entertainment · Hotel Info TV, Trade Shows, Mall Info TV, Campus TV, In Stadium · Live Sports, Monitoring, Surveillance, Corporate TV · Industrial Monitoring · Amateur HAM TV
- **Host requirements** — CPU: Intel, AMD, ARM, MIPS · 128MB RAM of system memory or above · Higher CPU and memory required if ISDB-T audio/video decoding is needed. · One available USB2.0 or 1.1 port

- RF Connector: Two 75-Ω MCX (female) connectors, one for Tx and one for Rx
- Bandwidth — DVB-T: 2/3/4/5/6/7/8 MHz
- Bandwidth — ISDB-T: 6/7/8 MHz
- FFT: 2K, 4K, 8K
- Constellation: 64QAM/16QAM/QPSK
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- ISDB-T Time-interleaver: Not supported
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- ISDB-T Layer: 1-layer (13-seg) and 2-layer (12-seg +1-seg)
- ISDB-T Segment: 13 セグメント / 12+1セグメント
- Frequency range: 100 .. 2500 MHz, tuning step 1 KHz
- RF Output Level: 5 dBm (113 dBuV) @100-470 MHz; 5 dBm (113 dBuV) @470-950 MHz; 0 dBm (108 dBuV) @950-1900 MHz; -5 dBm (103 dBuV) @1900-2500 MHz
- Digital Attenuator: Range: +0/-25dB, Step size 1dB
- MER: Typically, @-5 dB attenuation by ADRF6755: >39dB@V-band; >39dB@470-950 MHz; >36dB@950-1900 MHz; >34dB@1900-2500 MHz
- Spectrum Shoulder (Adjacent channel): 40dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB
- USB port: USB 2.0 or USB 1.1
- Power: 5V DC (USB Bus Power) 560mA
- Dimensions (LxWxH): 67 x 35 mm (excluding USB connector)

Note: The power consumption is a little over USB bus power budget (500mA). Please make sure your USB port can support it well.
Note: USB 1.1 can only support 3~5 Mbps stream data rate.

#### UT-100 Series — USB DVB-T Modulator Adaptor

Page: https://hides.com.tw/en/ham/catalog/ut-100/ · https://hides.com.tw/ham/catalog/ut-100/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_cg74469_eng.html (archive, noindex)

USB DVB-T transmit/receive adaptors (UT-100A/B/C/D)

The UT-100 series is a family of USB based modulator/demodulator adaptors supporting EN 300-744 DVB-T transmission and reception. They are powered from the USB bus, so no external power adapter is required, and perform full hardware modulation/demodulation with no host CPU computation required.

Key specs: 50~950 MHz and 1200~1350 MHz · 2~8 MHz configurable bandwidth · USB bus powered, Tx/Rx full duplex

Features:
- USB based modulator/demodulator with support for EN 300-744 DVB-T transmission and reception.
- Powered from the USB bus, so no external power adapter is required.
- Full hardware modulation/demodulation, no host CPU computation required.
- **Modulator (Transmitter)** — Direct digital conversion to 50~950MHz and 1200~1350 MHz for excellent signal quality · Configurable bandwidth 2MHz ~ 8 MHz · UT-100A/UT-100B/UT-100C support configurable bandwidth from 2MHz to 8 MHz. (Note: UT-100D supports only receiving and does not support transmitting.) · Support only non-hierarchy mode · Programmable digital attenuator · Free Windows Stream Player · Free Windows and Linux SDK
- **Demodulator (Receiver)** — UT-100A supports Worldwide Free to Air Digital Terrestrial (DVB-T) Receptions (5/6/7/8 MHz) · UT-100B/UT-100D is a special custom version (supporting 2/3/4 MHz bandwidth) for amateur HAM TV reception. (Note: UT-100C supports only transmitting and does not support receiving.) · Standard Windows DVB-T BDA driver provided · Windows Media Center compatible DVB-T TV tuner
- **Applications** — DVB-T signal generator · Demonstrations · Research and development · Video Broadcast/Distribution · Digital Signage · Wireless Display · Hotel TV, Hospital TV, On-Board TV, Luxury Home Entertainment · Hotel Info TV, Trade Shows, Mall Info TV, Campus TV, In Stadium · Live Sports, Monitoring, Surveillance, Corporate TV · Industrial Monitoring · Amateur HAM TV
- **Host requirements** — CPU: Intel, AMD, ARM, MIPS · 128MB RAM of system memory or above · Higher CPU and memory required if DVB-T audio/video decoding is needed · One available USB2.0 or 1.1 port

- RF Connector: Two 75-Ω MCX (female) connectors, one for Tx and one for Rx
- Bandwidth — Transmitter: UT-100A: 2/3/4/5/6/7/8 MHz; UT-100B: 2/3/4/5/6/7/8 MHz; UT-100C: 2/3/4/5/6/7/8 MHz; UT-100D: n/a
- Bandwidth — Receiver: UT-100A: 5/6/7/8 MHz; UT-100B: 2/3/4 MHz; UT-100C: n/a; UT-100D: 2/3/4 MHz
- FFT: 2K, 4K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range — Transmitter (UT-100A/B/C): 50~950MHz and 1200~1350MHz, step size 1KHz
- Frequency range — Receiver (UT-100A/B/D): 50~950MHz, step size 1KHz
- RF Output Level: 0 dBm (108 dBuV)
- Digital Attenuator: Range:+6/-25dB*, Step size 1dB
- MER: 50~950MHz, 35dB Typically; 1200~1350MHz, 30dB Typically
- Spectrum Shoulder (Adjacent channel): 45dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB
- USB port: USB 2.0 or USB 1.1
- Power: 5V DC (USB Bus Power) / 390mA (Tx and Rx) / 170mA (Rx only) / 340mA (Tx only)
- Dimensions (LxWxH): 75 x 30 x 15mm

Note: USB 1.1 can only support 3~5 Mbps stream data rate.
Note: There could be MER loss in high gain/attenuation level.

### 02 · DVB-T Receiver Adaptor (4)

#### UT-120 — USB DVB-T Diversity Receiver

Page: https://hides.com.tw/en/ham/catalog/ut-120/ · https://hides.com.tw/ham/catalog/ut-120/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_ut120_eng.html (archive, noindex)

Dual-tuner antenna diversity for mobile reception

The UT-120 is a USB based demodulator with support for EN 300-744 DVB-T reception, covering Worldwide Free to Air Digital Terrestrial (DVB-T) receptions at 5/6/7/8 MHz bandwidth. It offers superior sensitivity with dual tuner antenna diversity technology for mobile reception with Doppler enhancement.

Key specs: 50~950 MHz · 5/6/7/8 MHz bandwidth · DVB-T (EN 300-744), 2-way diversity

Features:
- USB based demodulator with support for EN 300-744 DVB-T reception. It can support Worldwide Free to Air Digital Terrestrial (DVB-T) Receptions (5/6/7/8 MHz bandwidth)
- Superior sensitivity with dual tuner antenna diversity technology for mobile reception with Doppler enhancement.
- Standard Windows DVB-T BDA driver provided
- Windows Media Center compatible DVB-T TV tuner
- Receiving frequency range 50~950MHz.
- Optional Picture-in-Picture mode that enables two onboard receivers working independently for tuning different channels.
- **Applications** — Mobile/Portable reception · UAV/UGV · FPV · FPU/ENG · Real-time AV reception in the stadium, e.g. Sports, Racing, Concert. · ccHDtv surveillance DVR · Any Commercial DVB-T Rx · Picture-in-Picture reception
- **Host requirements** — CPU: Intel, AMD, ARM, MIPS · 128MB RAM of system memory or above · Higher CPU and memory required if DVB-T audio/video decoding is needed · One available USB2.0 or 1.1 port

- RF connector: Two 50-Ω SMA (female) connectors
- Bandwidth: 5/6/7/8 MHz
- FFT: 2K, 4K, 8K
- Constellation: 64QAM/16QAM/QPSK
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 50~950MHz
- USB port: USB 2.0 or USB 1.1
- Dimensions: Bare bone 50 x 32mm / Box W(105 mm) x D(75 mm) x H(35 mm)

Note: USB 1.1 can only support 3~5 Mbps stream data rate.
Note: To enable the diversity function, two antennas should be spaced at least 70cm or more to increase the odds to receive better signal from either of the antennas.

#### UT-120EVB — DVB-T Diversity Receiver Evaluation Board

Page: https://hides.com.tw/en/ham/catalog/ut-120evb/ · https://hides.com.tw/ham/catalog/ut-120evb/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_ut120evb_eng.html (archive, noindex)

IT9137+IT9133 USB diversity receiver dongle · Core chips: ITE IT9137 and IT9133

An evaluation board for the ITE IT9137 and IT9133 core chips, implementing a USB DVB-T diversity receiver dongle. The kit ships with complete hardware reference schematics, chip documentation, driver sources and sample code for developers.

Key specs: 50~950 MHz · 5/6/7/8 MHz bandwidth · ITE IT9137 + IT9133 diversity

Features:
- USB based demodulator with support for EN 300-744 DVB-T reception. It can support Worldwide Free to Air Digital Terrestrial (DVB-T) Receptions (5/6/7/8 MHz bandwidth)
- Superior sensitivity with dual tuner antenna diversity technology for mobile reception with Doppler enhancement.
- Receiving frequency range 50~950MHz.
- Optional Picture-in-Picture mode that enables two onboard receivers working independently for tuning different channels.
- **Contents** — One evaluation board · Complete hardware reference schematics design (both Orcad and PDF files) · Core chip datasheet · Programming guide, API’s and sample codes · Linux driver source codes · Windows BDA driver and sample Windows player (binary files only)

#### UT-130 — USB DVB-T 4-band Receiver

Page: https://hides.com.tw/en/ham/catalog/ut-130/ · https://hides.com.tw/ham/catalog/ut-130/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_UT130_eng.html (archive, noindex)

100~2500 MHz, 2~8 MHz bandwidth

The UT-130 is a USB based DVB-T demodulator covering four bands without an extra down converter, including the standard TV VHF/UHF band (100MHz~950MHz), the 1.2GHz band and the 2.4GHz band. Channel bandwidth is software configurable between 2/3/4 MHz and 5/6/7/8 MHz.

Key specs: 100~950 / 1200~1350 / 2350~2500 MHz · 2/3/4 or 5/6/7/8 MHz bandwidth · DVB-T (EN 300-744)

Features:
- USB based demodulator with support for EN 300-744 DVB-T reception.
- No extra down converter needed, direct support for wide frequency range reception, including standard TV VHF/UHF (100MHz~950MHz) band, 1.2GHz band, and 2.4GHz band.
- Flexible channel bandwidth support, 2/3/4MHz or 5/6/7/8 MHz (software configurable)
- **Host requirements** — CPU: Intel, AMD, ARM, MIPS · 128MB RAM of system memory or above · Higher CPU and memory required if DVB-T audio/video decoding is needed · One available USB2.0 or 1.1 port

- RF connector: Three 50-Ω SMA (female) connectors, for standard TV band 100MHz~950 MHz, 1.2GHz band, 2.4GHz band (IPEX on-board)
- Bandwidth: 5/6/7/8 MHz or 2/3/4MHz, configurable by software
- FFT: 2K, 4K, 8K
- Constellation: 64QAM/16QAM/QPSK
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 100~950MHz / 1200~1350MHz / 2350~2500MHz
- RF-in Pmax: -10 dBm (Recommended 2.4GHz < -15 dBm, 1.2GHz < -25 dBm)
- USB port: USB 2.0 or USB 1.1
- Power: 5V DC, USB bus power / 177MHz: 460mA / 666MHz: 480mA / 1.2G: 500mA / 2.4G: 470mA
- Dimensions: Bare bone 82 x 35mm / Box W(105 mm) x D(75 mm) x H(35 mm)

Note: USB 1.1 can only support 3~5 Mbps stream data rate.

#### UT-160 — Diversity USB DVB-T Receiver

Page: https://hides.com.tw/en/ham/catalog/ut-160/ · https://hides.com.tw/ham/catalog/ut-160/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_ut160_eng.html (archive, noindex)

2-way diversity demodulator, 1~8 MHz bandwidth

The UT-160 is a USB receiver dongle with an integrated 2-way diversity demodulator supporting EN 300-744 DVB-T reception. It offers flexible channel bandwidth from 1 MHz to 8 MHz and extensive signal monitoring capabilities.

Key specs: 170~862 MHz · 1/1.5/2/2.5/3/4/5/6/7/8 MHz bandwidth · DVB-T (EN 300-744), 2-way diversity

Features:
- USB Receiver Dongle, with integrated 2-way diversity demodulator support for EN 300-744 DVB-T reception.
- Flexible and wide range channel bandwidth support, 1/1.5/2/2.5/3/4/5/6/7/8 MHz
- High monitoring capabilities (Received signal level, MER, C/N, channel profile, BER, MPEG quality, TPS change tracking, remaining adjacent channels power after digital filter)
- Superior sensitivity with dual tuner antenna diversity technology for mobile reception with Doppler enhancement.
- Standard Windows DVB-T BDA driver provided
- Windows Media Center compatible DVB-T TV tuner
- Linux V4L driver support
- Demux GPS information in the mux’ed stream
- **Host requirements** — CPU: Intel, AMD, ARM, MIPS · 128MB RAM of system memory or above · Higher CPU and memory required if DVB-T audio/video decoding is needed · One available USB2.0 or 1.1 port

- RF connector: Two 50-Ω SMA (female) connectors, for standard TV band 170MHz~862 MHz
- Bandwidth — Single Antenna: 1/1.5/2/2.5/3/4/5/6/7/8 MHz
- Bandwidth — Diversity Antenna: 2.5/3/4/5/6/7/8 MHz
- FFT: 2K, 4K, 8K
- Constellation: 64QAM/16QAM/QPSK
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 170~862MHz
- RF Performance — Pmax: >+5 dBm
- RF Performance — Pmin (FFT:2K, 16QAM, CR:2/3, GI:1/8): 1 MHz: <-99 dBm; 1.5 MHz: <-98 dBm; 2 MHz: <-96 dBm; 2.5 MHz: <-95 dBm; 3 MHz: <-95 dBm; 4 MHz: <-94 dBm; 5 MHz: <-92 dBm; 6 MHz: <-91 dBm; 7 MHz: <-90 dBm; 8 MHz: <-90 dBm
- RF Performance — Mobility: See mobility performance chart
- USB port: USB 2.0 or USB 1.1
- Power: 5V DC, USB bus power, 250mA
- Dimensions: Bare bone 58 x 96mm / Box W(105 mm) x D(75 mm) x H(35 mm)

Note: USB 1.1 can only support 3~5 Mbps stream data rate.

### 03 · ISDB-T/Tb Modulator Adaptor (3)

#### UT-200A/C — USB ISDB-T/Tb Modulator/Demodulator

Page: https://hides.com.tw/en/ham/catalog/ut-200/ · https://hides.com.tw/ham/catalog/ut-200/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_ut200_eng.html (archive, noindex)

USB based modulator/demodulator with support for ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb transmission and reception. Powered from the USB bus, so no external power adapter is required, and modulation/demodulation is fully in hardware with no host CPU computation required.

Key specs: 50–950 MHz · 6/7/8 MHz bandwidth · ISDB-T / ISDB-Tb

Features:
- USB based modulator/demodulator with support for ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb transmission and reception.
- Powered from the USB bus, so no external power adapter is required.
- Full hardware modulation/demodulation, no host CPU computation required.
- **Modulator (Transmitter)** — Direct digital conversion to 50..950MHz for excellent signal quality · Standard 6/7/8 MHz bandwidth · Layer mode supported: 1-layer (13-seg) and 2-layer (12+1 seg) · No time-interleaver support · Programmable digital attenuator · Free Windows Stream Player · Free Windows and Linux SDK
- A special version UT-200AJH/UT-200CH is available for HAM TV application, which can support 1.2GHz (1200…1350MHz) band.
- **Demodulator (Receiver)** — UT-200AJ supports Free to Air Digital Terrestrial (ISDB-T/-Tb) Receptions (6 / 7 MHz bandwidth) (UT-200C does not support receiver function) · Standard Windows ISDB-T BDA driver provided · Windows Media Center compatible ISDB-T/-Tb TV tuner
- **Applications** — ISDB-T/-Tb signal generator · Demonstrations · Research and development · Video Broadcast/Distribution · Digital Signage · Wireless Display · Hotel TV, Hospital TV, On-Board TV, Luxury Home Entertainment · Hotel Info TV, Trade Shows, Mall Info TV, Campus TV, In Stadium · Live Sports, Monitoring, Surveillance, Corporate TV · Industrial Monitoring · Amateur HAM TV
- **Host requirements** — CPU: Intel, AMD, ARM, MIPS · 128MB RAM of system memory or above · Higher CPU and memory required if ISDB-T audio/video decoding is needed. · One available USB2.0 or 1.1 port

- RF Connector: Two 75-Ω MCX (female) connectors, one for Tx and one for Rx
- Bandwidth — Transmitter: 6/7/8 MHz
- Bandwidth — Receiver (UT-200AJ only): 6/7 MHz
- FFT: 2K, 4K, 8K
- Constellation: 64QAM/16QAM/QPSK
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Time-interleaver: Not supported
- Layer: 1-layer (13-seg) and 2-layer (12-seg +1-seg) 1-階層 / 2-階層
- Segment: 13 セグメント / 12+1セグメント
- Frequency range: 50 .. 950MHz; UT-200AJH/UT-200CH: 50 .. 950MHz, 1200-1350MHz
- RF Output Level: -3 dBm (105 dBuV) @V-band; -5~-8 dBm (100-103 dBuV) @470-950 MHz; -14 dBm (94 dBuV) @1200-1350MHz
- Digital Attenuator: Range: +6/-25dB, Step size 1dB
- MER: Typically 33dB@V-band; 30dB@470-950 MHz; 28dB@1200-1350MHz
- Spectrum Shoulder (Adjacent channel): 45dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB
- USB port: USB 2.0 or USB 1.1
- Power: 5V DC (USB Bus Power); 390mA (Tx and Rx); 170mA (Rx only); 340mA (Tx only)
- Dimensions (LxWxH): 75 x 30 x 15mm

Note: There could be MER loss in high gain/attenuation level.
Note: USB 1.1 can only support 3~5 Mbps stream data rate.

#### UT-210EVB — USB DVB-T/ISDB-T Modulator Evaluation Board

Page: https://hides.com.tw/en/ham/catalog/ut-210evb/ · https://hides.com.tw/ham/catalog/ut-210evb/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_ut210evb_eng.html (archive, noindex)

Core chips: ITE IT9518, ADI ADRF6755

Evaluation board for the UT-210 USB DVB-T/ISDB-T modulator, built on the ITE IT9518 and ADI ADRF6755 core chips. The kit ships with complete hardware reference schematics, the core chip datasheet, drivers and SDKs for Windows and Linux, so developers can bring up their own design.

Key specs: 100–2500 MHz · 1/2/3/4/5/6/7/8 MHz bandwidth · ITE IT9518 + ADI ADRF6755

Features:
- USB based modulator with support for EN 300 744 DVB-T and ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb transmission.
- Powered from the USB bus, so no external power adapter is required.
- Full hardware modulation, no host CPU computation required.
- Professional grade modulation error rate (MER).
- **Direct digital conversion to 100..2500 MHz for excellent signal quality** — Standard 1/2/3/4/5/6/7/8 MHz bandwidth · ISDB-T Layer mode supported: 1-layer (13-seg) and 2-layer (12+1 seg) · No time-interleaver support in ISDB-T mode · Programmable digital attenuator
- **Contents** — One evaluation board with, Complete hardware reference schematics design (both Orcad and PDF files) · Core chip datasheet · Programming guide, API's and sample codes · Linux driver, API/SDK and testkit source codes · Windows driver · Windows API/SDK and testkit with source codes · Windows stream player (binary files only)

#### UT-211EVB — USB DVB-T/ISDB-T Modulator Evaluation Board

Page: https://hides.com.tw/en/ham/catalog/ut-211evb/ · https://hides.com.tw/ham/catalog/ut-211evb/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_ut211evb_eng.html (archive, noindex)

Core chip: ITE IT9517

Evaluation board for the UT-211 USB DVB-T/ISDB-T modulator, built on the ITE IT9517 core chip. The kit ships with complete hardware reference schematics, the core chip datasheet, drivers and SDKs for Windows and Linux, so developers can bring up their own design.

Key specs: 70–950 MHz, 1090–1450 MHz · 1/2/3/4/5/6/7/8 MHz bandwidth · ITE IT9517

Features:
- USB based modulator with support for EN 300 744 DVB-T and ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb transmission.
- Powered from the USB bus, so no external power adapter is required.
- Full hardware modulation, no host CPU computation required.
- Direct digital conversion to 70~950 MHz and 1090~1450 MHz.
- Standard 1/2/3/4/5/6/7/8 MHz bandwidth.
- ISDB-T Layer mode supported: 1-layer (13-seg) and 2-layer (12+1 seg).
- No time-interleaver support in ISDB-T mode.
- Programmable digital attenuator.
- **Contents** — One evaluation board with, Complete hardware reference schematics design (both Orcad and PDF files) · Core chip datasheet · Programming guide, API's and sample codes · Linux driver, API/SDK and testkit source codes · Windows driver · Windows API/SDK and testkit with source codes · Windows stream player (binary files only)

### 04 · DVB-T Full HD Modulator Box (15)

#### HV-100EH — Full HD Digital TV Modulator

Page: https://hides.com.tw/en/ham/catalog/hv-100eh/ · https://hides.com.tw/ham/catalog/hv-100eh/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_HV100eh_eng.html (archive, noindex)

HDMI/Composite(CVBS) to DVB-T · 1.2GHz for HAM TV

HV-100EH is a special edition of HV-100E for HAM TV application; HV-100EH can support up to 1.2G band with high RF power (-18dBm), but 2'nd and 3'rd harmonic in 950MH~1350MHz band is not well filtered.

Key specs: 50~950 MHz / 1200~1350 MHz · 2~8 MHz bandwidth · DVB-T EN 300-744

Features:
- **Low Cost HD Video Distribution** — Compliant to existing HD TV sets, no extra adapter required, and no restriction on the number of receivers. All the peripherals like splitter, amplifier, connector...etc are the same as those for regular TV.
- **Versatile video inputs and formats** — Support HDMI/DVI and composite (CVBS) video input. Besides H.264/MPEG2 HD, MPEG2 SD format is also supported and compliant to existing SD TV sets or STB's.
- **Easy to Configure** — Channel number can be configured with the built-in keypad switch easily. More advanced configurations can be set from an external host like PC/NB or Tablet/Pad thru USB interface.
- **Robust, Reliable and Long Distance** — Easily transmit 1080p video over a single 3C2V/RG59 cable for at least 500 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 20 dBm. The real distance depends on the antenna design and receiver quality. Differential RF output is also available for RF signal distribution with twisted pairs (telephone or Ethernet RJ-45) instead of heavy coaxial cables.
- **Daisy-chain Connection (Bus-Topology)** — Multiple HV-100's with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- **Real time protocol and Low latency** — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency

- Input: Video: CVBS, HDMI 1.3 (with HDMI loop-thru); Audio: Stereo line-in or HDMI PCM audio-in (HDMI PCM audio-in supports up to stereo 96KHz, 24bits)
- Compression: Video: H.264 or MPEG2; Audio: AAC or MPEG
- Resolution — Input (CVBS): 720x480x30I (NTSC, D1); 720x576x25I (PAL, D1)
- Resolution — Input (HDMI): 720x480x30I (NTSC, D1); 720x576x25I (PAL, D1); 1280x720x24P; 1280x720x50I/1280x720x50P; 1280x720x60I/1280x720x60P; 1920x1080x24P; 1920x1080x50I/1920x1080x50P; 1920x1080x60I/1920x1080x60P
- Resolution — Output (H.264): 1920x1080x25P; 1600x1080x24P/1600x1080x25P/1600x1080x30P; 1440x1080x24P/1440x1080x25P/1440x1080x30P; 1280x1080x24P/1280x1080x25P/1280x1080x30P; 1280x720x24P/1280x720x25P/1280x720x30P; 704x576x25P (PAL, D1); 704x480x30P (NTSC, D1); 352x576x25P (PAL, Half D1); 352x480x30P (NTSC, Half D1)
- Resolution — Output (MPEG2): 1280x1080x24P/1280x1080x25P/1280x1080x30P; 1280x720x24P/1280x720x25P/1280x720x30P; 704x576x25P (PAL, D1); 704x480x30P (NTSC, D1); 352x576x25P (PAL, Half D1); 352x480x30P (NTSC, Half D1)
- Power: DC 9~24V; Power Consumption 0.7A@12V
- Operating Temperature: -10°C ~ 60°C

- TV Standard: HV-100EH: DVB-T EN-300 744
- RF connector: 75-Ω F-type connector and two-wire terminal for twisted pairs (differential RF output)
- Bandwidth: HV-100EH: 2/3/4/5/6/7/8 MHz
- FFT: 2K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 50~950MHz, 1200~1350MHz step size 1KHz; DVB-T channels: VHF 6M BW/UHF 6M BW: Channel: CH7~CH83; VHF 7M BW/UHF 7M BW: Channel: CH5~CH69; VHF 8M BW/UHF 8M BW: Channel: CH5~CH69
- Segment & Layer: HV-100EH: n/a
- Time Interleaver: HV-100EH: n/a
- RF Output Level: 50-950 MHz -3 dBm (105 dBuV) typically (Differential output less by 6~7 dB); HV-100EH (HV-100E HAM TV version): 1200-1350 MHz -18~-20 dBm (88~90 dBuV) typically, without Differential output
- Digital Gain/Attenuator for Fine Tuning: Range: +5dB~-10dB, Step size 1dB
- MER: 50~950MHz, 35 dB Typically; 1200~1350MHz, 25dB Typically (HV-100EH)
- Spectrum Shoulder (Adjacent channel): 45dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB

Note: Note: output formats supported depend on the video input formats. The frame rate should be consistent and the encoded video frame size should be less or equal to the original input.
Note: Specifications are subject to change without prior notice.
Note: There could be MER loss in high gain/attenuation level.

#### HV-100J — Full HD Digital TV Modulator

Page: https://hides.com.tw/en/ham/catalog/hv-100j/ · https://hides.com.tw/ham/catalog/hv-100j/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_HV100j_eng.html (archive, noindex)

HDMI/Composite(CVBS) to ISDB-T/ISDB-Tb

HV-100J is a Full HD digital TV modulator that encodes HDMI/DVI or composite (CVBS) video in H.264 or MPEG2 and modulates it to ISDB-T (ARIB STD-B31) or ISDB-Tb (ABNT NBR 15601) for distribution over coaxial cable or air.

Key specs: 50~950 MHz / 1200~1350 MHz · 6 MHz bandwidth · ISDB-T ARIB STD-B31 / ISDB-Tb ABNT NBR 15601

Features:
- **Low Cost HD Video Distribution** — Compliant to existing HD TV sets, no extra adapter required, and no restriction on the number of receivers. All the peripherals like splitter, amplifier, connector...etc are the same as those for regular TV.
- **Versatile video inputs and formats** — Support HDMI/DVI and composite (CVBS) video input. Besides H.264/MPEG2 HD, MPEG2 SD format is also supported and compliant to existing SD TV sets or STB's.
- **Easy to Configure** — Channel number can be configured with the built-in keypad switch easily. More advanced configurations can be set from an external host like PC/NB or Tablet/Pad thru USB interface.
- **Robust, Reliable and Long Distance** — Easily transmit 1080p video over a single 3C2V/RG59 cable for at least 500 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 20 dBm. The real distance depends on the antenna design and receiver quality. Differential RF output is also available for RF signal distribution with twisted pairs (telephone or Ethernet RJ-45) instead of heavy coaxial cables.
- **Daisy-chain Connection (Bus-Topology)** — Multiple HV-100's with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- **Real time protocol and Low latency** — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency

- Input: Video: CVBS, HDMI 1.3 (with HDMI loop-thru); Audio: Stereo line-in or HDMI PCM audio-in (HDMI PCM audio-in supports up to stereo 96KHz, 24bits)
- Compression: Video: H.264 or MPEG2; Audio: AAC or MPEG
- Resolution — Input (CVBS): 720x480x30I (NTSC, D1); 720x576x25I (PAL, D1)
- Resolution — Input (HDMI): 720x480x30I (NTSC, D1); 720x576x25I (PAL, D1); 1280x720x24P; 1280x720x50I/1280x720x50P; 1280x720x60I/1280x720x60P; 1920x1080x24P; 1920x1080x50I/1920x1080x50P; 1920x1080x60I/1920x1080x60P
- Resolution — Output (H.264): 1920x1080x24P/1920x1080x25P/1920x1080x30P; 1600x1080x24P/1600x1080x25P/1600x1080x30P; 1440x1080x24P/1440x1080x25P/1440x1080x30P; 1280x1080x24P/1280x1080x25P/1280x1080x30P; 1280x720x24P/1280x720x25P/1280x720x30P; 704x576x25P (PAL, D1); 704x480x30P (NTSC, D1); 352x576x25P (PAL, Half D1); 352x480x30P (NTSC, Half D1)
- Resolution — Output (MPEG2): 1600x1080x24P/1600x1080x25P; 1440x1080x24P/1440x1080x25P/1440x1080x30P; 1280x1080x24P/1280x1080x25P/1280x1080x30P; 1280x720x24P/1280x720x25P/1280x720x30P; 704x576x25P (PAL, D1); 704x480x30P (NTSC, D1); 352x576x25P (PAL, Half D1); 352x480x30P (NTSC, Half D1)
- Power: DC 9~24V; Power Consumption 0.7A@12V
- Operating Temperature: -10°C ~ 60°C

- TV Standard: HV-100J: ISDB-T ARIB STD-B31 / ISDB-Tb ABNT NBR 15601
- RF connector: 75-Ω F-type connector and two-wire terminal for twisted pairs (differential RF output)
- Bandwidth: HV-100J: 6MHz
- FFT: 2K, 4K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 50~950MHz, 1200~1350MHz step size 1KHz; ISDB-T channels: (STD-B21) UHF band: UHF 13ch~62ch; VHF band VHF 1ch~12 ch; MID band c13ch~c22 ch; SHB band c23ch~c63 ch
- Segment & Layer: HV-100J: 13 Seg or 1 Seg
- Time Interleaver: HV-100J: Not supported
- RF Output Level: 50-950 MHz -3 dBm (105 dBuV) typically (Differential output less by 6~7 dB); HV-100EH (HV-100E HAM TV version): 1200-1350 MHz -18~-20 dBm (88~90 dBuV) typically, without Differential output
- Digital Gain/Attenuator for Fine Tuning: Range: +5dB~-10dB, Step size 1dB
- MER: 50~950MHz, 35 dB Typically; 1200~1350MHz, 25dB Typically (HV-100EH)
- Spectrum Shoulder (Adjacent channel): 45dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB

Note: Note: output formats supported depend on the video input formats. The frame rate should be consistent and the encoded video frame size should be less or equal to the original input.
Note: Specifications are subject to change without prior notice.
Note: There could be MER loss in high gain/attenuation level.

#### HV-101E — Full HD Digital TV Modulator

Page: https://hides.com.tw/en/ham/catalog/hv-101/ · https://hides.com.tw/ham/catalog/hv-101/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_HV101_eng.html (archive, noindex)

VGA/Component(YPbPr) to DVB-T

HV-101E is a Full HD digital TV modulator that encodes VGA or component (YPbPr) video in H.264 or MPEG2 and modulates it to DVB-T (EN 300-744) for distribution over coaxial cable or air.

Key specs: 50~950 MHz / 1200~1350 MHz · 2~8 MHz bandwidth · DVB-T EN 300-744

Features:
- **Low Cost HD Video Distribution** — Compliant to existing HD TV sets, no extra adapter required, and no restriction on the number of receivers. All the peripherals like splitter, amplifier, connector...etc are the same as those for regular TV.
- **Versatile video inputs and formats** — Support VGA and component (YPbPr) video input. Besides H.264/MPEG2 HD, MPEG2 SD format is also supported and compliant to existing SD TV sets or STB's.
- **Easy to Configure** — Channel number can be configured with the built-in keypad switch easily. More advanced configurations can be set from an external host like PC/NB or Tablet/Pad thru USB interface.
- **Robust, Reliable and Long Distance** — Easily transmit 1080p video over a single 3C2V/RG59 cable for at least 500 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 20 dBm. The real distance depends on the antenna design and receiver quality. Differential RF output is also available for RF signal distribution with twisted pairs (telephone or Ethernet RJ-45) instead of heavy coaxial cables.
- **Daisy-chain Connection (Bus-Topology)** — Multiple HV-101's with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- **Real time protocol and Low latency** — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency

- Input: Video: VGA, Component (YPbPr); Audio: Stereo line-in
- Compression: Video: H.264 or MPEG2; Audio: AAC or MPEG
- Resolution — Input (YPbPr): 1920x1080x60P; 1920x1080x60I/1920x1080x50I; 1280x720x60P/1280x720x50P; 720x480x60P (NTSC, D1, Progressive); 720x576x50P (PAL, D1, Progressive)
- Resolution — Input (VGA): 1920x1080x60P; 1280x1024x60P; 1280x720x60P; 800x600x60P; 640x480x60P
- Resolution — Output (H.264): 1920x1080x25P/1920x1080x30P; 1600x1080x25P/1600x1080x30P; 1440x1080x25P/1440x1080x30P; 1280x1080x25P/1280x1080x30P; 1280x1024x30P; 1280x720x25P/1280x720x30P; 800x600x30P; 704x576x25P (PAL, D1); 704x480x30P (NTSC, D1); 640x480x30P; 352x576x25P (PAL, Half D1); 352x480x30P (NTSC, Half D1)
- Resolution — Output (MPEG2): 1600x1080x25P; 1440x1080x25P/1440x1080x30P; 1280x1080x25P/1280x1080x30P; 1280x1024x30P; 1280x720x25P/1280x720x30P; 800x600x30P; 704x576x25P (PAL, D1); 704x480x30P (NTSC, D1); 640x480x30P; 352x576x25P (PAL, Half D1); 352x480x30P (NTSC, Half D1)
- Power: DC 9~24V; Power Consumption 0.7A@12V
- Dimension WxDxH: 195mmx125mmx40mm
- Weight: 735g
- Operating Temperature: -10°C ~ 60°C

- TV Standard: HV-101E: DVB-T EN-300 744
- RF connector: 75-Ω F-type connector and two-wire terminal for twisted pairs (differential RF output)
- Bandwidth: HV-101E: 2/3/4/5/6/7/8 MHz
- FFT: 2K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 50~950MHz, 1200~1350MHz step size 1KHz; DVB-T channels: VHF 6M BW/UHF 6M BW: Channel: CH7~CH83; VHF 7M BW/UHF 7M BW: Channel: CH5~CH69; VHF 8M BW/UHF 8M BW: Channel: CH5~CH69
- Segment & Layer: HV-101E: n/a
- Time Interleaver: HV-101E: n/a
- RF Output Level: 50-950 MHz -3 dBm (105 dBuV) typically; 1200-1350 MHz -30~-40 dBm (68~78 dBuV) typically (Differential output less by 6~7 dB)
- Digital Gain/Attenuator for Fine Tuning: Range: +5dB~-10dB, Step size 1dB
- MER: 50~950MHz, 35 dB Typically; 1200~1350MHz, 30dB Typically
- Spectrum Shoulder (Adjacent channel): 45dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB

Note: Note1: output formats supported depend on the video input formats. The frame rate should be consistent and the encoded video frame size should be less or equal to the original input.
Note: Note2: For VGA-input, the encoded frame size can only be the same as the input.
Note: Specifications are subject to change without prior notice.
Note: There could be MER loss in high gain/attenuation level.

#### HV-101J — Full HD Digital TV Modulator

Page: https://hides.com.tw/en/ham/catalog/hv-101j/ · https://hides.com.tw/ham/catalog/hv-101j/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_HV101j_eng.html (archive, noindex)

VGA/YPbPr to ISDB-T/ISDB-Tb

HV-101J is a Full HD digital TV modulator that encodes VGA or component (YPbPr) video in H.264 or MPEG2 and modulates it to ISDB-T (ARIB STD-B31) or ISDB-Tb (ABNT NBR 15601) for distribution over coaxial cable or air.

Key specs: 50~950 MHz / 1200~1350 MHz · 6 MHz bandwidth · ISDB-T ARIB STD-B31 / ISDB-Tb ABNT NBR 15601

Features:
- **Low Cost HD Video Distribution** — Compliant to existing HD TV sets, no extra adapter required, and no restriction on the number of receivers. All the peripherals like splitter, amplifier, connector...etc are the same as those for regular TV.
- **Versatile video inputs and formats** — Support VGA and component (YPbPr) video input. Besides H.264/MPEG2 HD, MPEG2 SD format is also supported and compliant to existing SD TV sets or STB's.
- **Easy to Configure** — Channel number can be configured with the built-in keypad switch easily. More advanced configurations can be set from an external host like PC/NB or Tablet/Pad thru USB interface.
- **Robust, Reliable and Long Distance** — Easily transmit 1080p video over a single 3C2V/RG59 cable for at least 500 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 20 dBm. The real distance depends on the antenna design and receiver quality. Differential RF output is also available for RF signal distribution with twisted pairs (telephone or Ethernet RJ-45) instead of heavy coaxial cables.
- **Daisy-chain Connection (Bus-Topology)** — Multiple HV-101's with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- **Real time protocol and Low latency** — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency

- Input: Video: VGA, Component (YPbPr); Audio: Stereo line-in
- Compression: Video: H.264 or MPEG2; Audio: AAC or MPEG
- Resolution — Input (YPbPr): 1920x1080x60P; 1920x1080x60I/1920x1080x50I; 1280x720x60P/1280x720x50P; 720x480x60P (NTSC, D1, Progressive); 720x576x50P (PAL, D1, Progressive)
- Resolution — Input (VGA): 1920x1080x60P; 1280x1024x60P; 1280x720x60P; 800x600x60P; 640x480x60P
- Resolution — Output (H.264): 1920x1080x25P/1920x1080x30P; 1600x1080x25P/1600x1080x30P; 1440x1080x25P/1440x1080x30P; 1280x1080x25P/1280x1080x30P; 1280x1024x30P; 1280x720x25P/1280x720x30P; 800x600x30P; 704x576x25P (PAL, D1); 704x480x30P (NTSC, D1); 640x480x30P; 352x576x25P (PAL, Half D1); 352x480x30P (NTSC, Half D1)
- Resolution — Output (MPEG2): 1600x1080x25P; 1440x1080x25P/1440x1080x30P; 1280x1080x25P/1280x1080x30P; 1280x1024x30P; 1280x720x25P/1280x720x30P; 800x600x30P; 704x576x25P (PAL, D1); 704x480x30P (NTSC, D1); 640x480x30P; 352x576x25P (PAL, Half D1); 352x480x30P (NTSC, Half D1)
- Power: DC 9~24V; Power Consumption 0.7A@12V
- Dimension WxDxH: 195mmx125mmx40mm
- Weight: 735g
- Operating Temperature: -10°C ~ 60°C

- TV Standard: HV-101J: ISDB-T ARIB STD-B31 / ISDB-Tb ABNT NBR 15601
- RF connector: 75-Ω F-type connector and two-wire terminal for twisted pairs (differential RF output)
- Bandwidth: HV-101J: 6MHz
- FFT: 2K, 4K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 50~950MHz, 1200~1350MHz step size 1KHz; ISDB-T channels: (STD-B21) UHF band: UHF 13ch~62ch; VHF band VHF 1ch~12 ch; MID band c13ch~c22 ch; SHB band c23ch~c63 ch
- Segment & Layer: HV-101J: 13 Seg or 1 Seg
- Time Interleaver: HV-101J: Not supported
- RF Output Level: 50-950 MHz -3 dBm (105 dBuV) typically; 1200-1350 MHz -30~-40 dBm (68~78 dBuV) typically (Differential output less by 6~7 dB)
- Digital Gain/Attenuator for Fine Tuning: Range: +5dB~-10dB, Step size 1dB
- MER: 50~950MHz, 35 dB Typically; 1200~1350MHz, 30dB Typically
- Spectrum Shoulder (Adjacent channel): 45dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB

Note: Note1: output formats supported depend on the video input formats. The frame rate should be consistent and the encoded video frame size should be less or equal to the original input.
Note: Note2: For VGA-input, the encoded frame size can only be the same as the input.
Note: Specifications are subject to change without prior notice.
Note: There could be MER loss in high gain/attenuation level.

#### HV-102E — Full HD Digital TV Modulator

Page: https://hides.com.tw/en/ham/catalog/hv-102/ · https://hides.com.tw/ham/catalog/hv-102/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_HV102_eng.html (archive, noindex)

HD-SDI/HDMI to DVB-T

HV-102 is the most cost-effective solution to distribute HDMI or HD-SDI video to unlimited standard TV's without requiring any special adapter. The video input source from either HDMI/DVI or HD-SDI is encoded in MPEG2 or H.264 streams, modulated with the open industrial standard EN 300-744 DVB-T/ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb, and then transmitted over cable or air. All DVB-T/ISDB-T/ISDB-Tb compliant receivers, including SetTopBox, Digital TV, PC/NB USB DTV dongle, or DTV capture card can receive, and watch the video from a HV-102 via the standard coaxial cable or antenna. HV-102E supports EN 300-744 DVB-T modulation while HV-102J supports ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb modulation.

Key specs: 50~950 MHz / 1200~1350 MHz · DVB-T 1~8 MHz · DVB-T EN 300-744

Features:
- **Low Cost HD Video Distribution** — Compliant to existing HD TV sets, no extra adapter required, and no restriction on the number of receivers. All the peripherals like splitter, amplifier, connector...etc are the same as those for regular TV.
- **Flexible Bandwidth Option** — In DVB-T mode, 1MHz~8MHz Bandwidth options are supported.
- **UART Digital Data Mux** — HV-102 supports UART data mux feature. GPS or aviation data can be multiplexed in the transmitted stream from HV-102's UART port. Besides audio and video, the receiver can decode the received UART data for further data processing. The communication parameters for the data mux UART port are configurable.
- **Video Streaming and Web Management** — HV-102 supports network video streaming input/output and Web interface for remote management.
- **Versatile video inputs and formats** — Support HD-SDI and HDMI/DVI video input. Besides H.264/MPEG2 HD, MPEG2 SD format is also supported and compliant to existing SD TV sets or STB's.
- **Easy to Configure** — Channel number can be configured with the built-in keypad switch easily. More advanced configurations can be set from an external host like PC/NB or Tablet/Pad thru USB interface. Remote Web management is also supported.
- **Robust, Reliable and Long Distance** — Easily transmit 1080p video over a single 3C2V/RG59 cable for at least 500 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 30 dBm with an external PA. The real distance depends on the antenna design and receiver quality. Differential RF output is also available for RF signal distribution with twisted pairs (telephone or Ethernet RJ-45) instead of heavy coaxial cables.
- **Daisy-chain Connection (Bus-Topology)** — Multiple HV-102's with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- **Real time protocol and Low latency** — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency

- Input — Video: 1. HD-SDI; 2. HDMI 1.3 (with HDMI loop-thru)
- Input — Audio: 1. HD-SDI embedded audio (48K stereo only); 2. HDMI PCM audio-in (supports up to stereo 96KHz, 24bits); 3. External analog Line-in
- Compression: Video: H.264 or MPEG2; Audio: AAC or MPEG
- Resolution — Input (HD-SDI): 1920x1080x60P, 1920x1080x60I, 1920x1080x30P; 1920x1080x50P, 1920x1080x50I, 1920x1080x25P; 1920x1080x24P; 1280x720x60P; 1280x720x50P
- Resolution — Input (HDMI): 720x480x30I (NTSC, D1); 720x576x25I (PAL, D1); 1280x720x24P; 1280x720x50I/1280x720x50P; 1280x720x60I/1280x720x60P; 1920x1080x24P; 1920x1080x50I/1920x1080x50P; 1920x1080x60I/1920x1080x60P
- Resolution — Output (H.264): 1920x1080x24P/1920x1080x25P; 1600x1080x24P/1600x1080x25P/1600x1080x30P; 1440x1080x24P/1440x1080x25P/1440x1080x30; 1280x1080x24P/1280x1080x25P/1280x1080x30; 1280x720x24P/1280x720x25P/1280x720x30P; 704x576x25P (PAL, D1); 704x480x30P (NTSC, D1); 352x576x25P (PAL, Half D1); 352x480x30P (NTSC, Half D1)
- Resolution — Output (MPEG2): 1280x1080x24P/1280x1080x25P/1280x1080x30P; 1280x720x24P/1280x720x25P/1280x720x30P; 704x576x25P (PAL, D1); 704x480x30P (NTSC, D1); 352x576x25P (PAL, Half D1); 352x480x30P (NTSC, Half D1)
- Power: DC 9~24V; Power Consumption 1A@12V
- Dimension WxDxH: 195mmx125mmx40mm
- Weight: 735g
- Operating Temperature: -10℃ ~ 60℃

- TV Standard: HV-102E: DVB-T EN-300 744; HV-102J: ISDB-T ARIB STD-B31 / ISDB-Tb ABNT NBR 15601
- RF connector: 75-Ω F-type connector and two-wire terminal for twisted pairs (differential RF output)
- Bandwidth: HV-102E: 1/2/3/4/5/6/7/8 MHz; HV-102J: 6MHz
- FFT: HV-102E: 2K, 8K; HV-102J: 2K, 4K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 50~950MHz, 1200~1350MHz step size 1KHz; DVB-T channels: VHF 6M BW/UHF 6M BW: Channel: CH7~CH83; VHF 7M BW/UHF 7M BW: Channel: CH5~CH69; VHF 8M BW/UHF 8M BW: Channel: CH5~CH69; ISDB-T channels: (STD-B21) UHF band: UHF 13ch~62ch; VHF band VHF 1ch~12 ch; MID band c13ch~c22 ch; SHB band c23ch~c63 ch
- Segment & Layer: HV-102E: n/a; HV-102J: 13 Seg or 1 Seg
- Time Interleaver: HV-102E: n/a; HV-102J: Not supported
- RF Output Level: 50-950 MHz -3 dBm (105 dBuV) typically (Differential output less by 6~7 dB); HV-102EH (HV-102E HAM TV version): 1200-1350 MHz -18~-20 dBm (88~90 dBuV) typically
- Digital Gain/Attenuator for Fine Tuning: range: +5dB~-10dB, Step size 1dB
- MER: 50~950MHz, 35 dB Typically; 1200~1350MHz, 30dB Typically (HV-102EH)
- Spectrum Shoulder (Adjacent channel): 45dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB

Note: Note: output formats supported depend on the video input formats. The frame rate should be consistent and the encoded video frame size should be less or equal to the original input.
Note: Specifications are subject to change without prior notice.
Note: There could be MER loss in high gain/attenuation level.

#### HV-102J — Full HD Digital TV Modulator

Page: https://hides.com.tw/en/ham/catalog/hv-102j/ · https://hides.com.tw/ham/catalog/hv-102j/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_HV102j_eng.html (archive, noindex)

HD-SDI/HDMI to ISDB-T/ISDB-Tb

HV-102J is a Full HD digital TV modulator that encodes an HD-SDI or HDMI video source in H.264 or MPEG2 and modulates it to ISDB-T (ARIB STD-B31) or ISDB-Tb (ABNT NBR 15601) for distribution over coaxial cable or air. Any compliant TV set or set-top box can receive it with no extra adapter required.

Key specs: 50~950 MHz, 1200~1350 MHz, step size 1 KHz · 6 MHz · ISDB-T ARIB STD-B31 / ISDB-Tb ABNT NBR 15601

Features:
- **Low Cost HD Video Distribution** — Compliant to existing HD TV sets, no extra adapter required, and no restriction on the number of receivers. All the peripherals like splitter, amplifier, connector…etc are the same as those for regular TV.
- **Versatile video inputs and formats** — Support VGA and component (YPbPr) video input. Besides H.264/MPEG2 HD, MPEG2 SD format is also supported and compliant to existing SD TV sets or STB's.
- **Easy to Configure** — Channel number can be configured with the built-in keypad switch easily. More advanced configurations can be set from an external host like PC/NB or Tablet/Pad thru USB interface.
- **Robust, Reliable and Long Distance** — Easily transmit 1080p video over a single 3C2V/RG59 cable for at least 500 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 20 dBm. The real distance depends on the antenna design and receiver quality. Differential RF output is also available for RF signal distribution with twisted pairs (telephone or Ethernet RJ-45) instead of heavy coaxial cables.
- **Daisy-chain Connection (Bus-Topology)** — Multiple HV-102's with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- **Real time protocol and Low latency** — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency.

- Input: Video: HD-SDI, HDMI 1.3 (with HDMI loop-thru); Audio: HD-SDI or HDMI PCM audio-in (PCM audio-in supports up to stereo 96KHz, 24bits)
- Compression: Video: H.264 or MPEG2; Audio: AAC or MPEG
- Resolution — Input (HD-SDI): 1920x1080x60P, 1920x1080x30P, 1280x720x60P, 1280x720x30P
- Resolution — Input (HDMI): 720x480x30I (NTSC, D1), 720x576x25I (PAL, D1), 1280x720x24P, 1280x720x50I/1280x720x50P, 1280x720x60I/1280x720x60P, 1920x1080x24P, 1920x1080x50I/1920x1080x50P, 1920x1080x60I/1920x1080x60P
- Resolution — Output (H.264): 1920x1080x24P/1920x1080x25P, 1600x1080x24P/1600x1080x25P/1600x1080x30P, 1440x1080x24P/1440x1080x25P/1440x1080x30, 1280x1080x24P/1280x1080x25P/1280x1080x30, 1280x720x24P/1280x720x25P/1280x720x30P, 704x576x25P (PAL, D1), 704x480x30P (NTSC, D1), 352x576x25P (PAL, Half D1), 352x480x30P (NTSC, Half D1) *Note 1&2
- Resolution — Output (MPEG2): 1600x1080x24P, 1440x1080x24P/1440x1080x25P/1440x1080x30P, 1280x1080x24P/1280x1080x25P/1280x1080x30P, 1280x720x24P/1280x720x25P/1280x720x30P, 704x576x25P (PAL, D1), 704x480x30P (NTSC, D1), 352x576x25P (PAL, Half D1), 352x480x30P (NTSC, Half D1) *Note 1&2
- Power: DC 9~24V, Power Consumption 0.7A@12V
- Dimension WxDxH: 195mm x 125mm x 40mm
- Weight: 735g
- Operating Temperature: -10°C ~ 60°C

- TV Standard: ISDB-T ARIB STD-B31, ISDB-Tb ABNT NBR 15601
- RF connector: 75-Ω F-type connector and two-wire terminal for twisted pairs (differential RF output)
- Bandwidth: 6 MHz
- FFT: 2K, 4K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 50~950 MHz, 1200~1350 MHz, step size 1KHz. ISDB-T channels (STD-B21): UHF band UHF 13ch~62ch; VHF band VHF 1ch~12ch; MID band c13ch~c22ch; SHB band c23ch~c63ch
- Segment & Layer: 13 Seg or 1 Seg
- Time Interleaver: Not supported
- RF Output Level: 50-950 MHz -3 dBm (105 dBuV) typically; 1200-1350 MHz -30~-40 dBm (68~78 dBuV) typically (Differential output less by 6~7 dB)
- Digital Gain/Attenuator for Fine Tuning: Range: +5dB ~ -10dB, Step size 1dB
- MER: 50~950MHz, 35 dB Typically; 1200~1350MHz, 30dB Typically
- Spectrum Shoulder (Adjacent channel): 45dB
- Carrier Suppression: >42dB

Note: Note 1: output formats supported depend on the video input formats. The frame rate should be consistent and the encoded video frame size should be less or equal to the original input.
Note: Note 2: For VGA-input, the encoded frame size can only be the same as the input.
Note: There could be MER loss in high gain/attenuation level.
Note: Specifications are subject to change without prior notice.

#### HV-200E — Professional 4-band Full HD Digital TV Modulator

Page: https://hides.com.tw/en/ham/catalog/hv-200/ · https://hides.com.tw/ham/catalog/hv-200/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_HV200_eng.html (archive, noindex)

HDMI/Composite to DVB-T

HV-200 is the most cost-effective solution to distribute HDMI or composite (CVBS) video to unlimited standard TV's without requiring any special adapter. The video input source from either HDMI/DVI or composite (CVBS) is encoded in MPEG2 or H.264 streams, modulated with the open industrial standard EN 300-744 DVB-T/ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb, and then transmitted over cable or air. All DVB-T/ISDB-T/ISDB-Tb compliant receivers, including SetTopBox, Digital TV, PC/NB USB DTV dongle, or DTV capture card can receive, and watch the video from a HV-200 via the standard coaxial cable or antenna.

Key specs: 100 .. 2500 MHz, tuning step 1 KHz · 2/3/4/5/6/7/8 MHz (DVB-T) · DVB-T EN-300 744

Features:
- **High Performance Wide Frequency Range Support** — Direct digital conversion to 100..2500 MHz for excellent signal quality. Professional grade modulation error rate (MER).
- **Low Cost HD Video Distribution** — Compliant to existing HD TV sets, no extra adapter required, and no restriction on the number of receivers. All the peripherals like splitter, amplifier, connector…etc are the same as those for regular TV.
- **Versatile video inputs and formats** — Support HDMI/DVI and composite (CVBS) video input. Besides H.264/MPEG2 HD, MPEG2 SD format is also supported and compliant to existing SD TV sets or STB's.
- **Easy to Configure** — Channel number can be configured with the built-in keypad switch easily. More advanced configurations can be set from an external host like PC/NB or Tablet/Pad thru USB interface.
- **Robust, Reliable and Long Distance** — Easily transmit 1080p video over a single 3C2V/RG59 cable for at least 500 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 20 dBm. The real distance depends on the antenna design and receiver quality. Differential RF output is also available for RF signal distribution with twisted pairs (telephone or Ethernet RJ-45) instead of heavy coaxial cables.
- **Daisy-chain Connection (Bus-Topology)** — Multiple HV-200's with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- **Real time protocol and Low latency** — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency.

- Input: Video: CVBS, HDMI 1.3 (with HDMI loop-thru); Audio: Stereo line-in or HDMI PCM audio-in (HDMI PCM audio-in supports up to stereo 96KHz, 24bits)
- Compression: Video: H.264 or MPEG2; Audio: AAC or MPEG
- Resolution — Input (CVBS): 720x480x30I (NTSC, D1), 720x576x25I (PAL, D1)
- Resolution — Input (HDMI): 720x480x30I (NTSC, D1), 720x576x25I (PAL, D1), 1280x720x24P, 1280x720x50I/1280x720x50P, 1280x720x60I/1280x720x60P, 1920x1080x24P, 1920x1080x50I/1920x1080x50P, 1920x1080x60I/1920x1080x60P
- Resolution — Output (H.264): 1920x1080x25P, 1600x1080x24P/1600x1080x25P/1600x1080x30P, 1440x1080x24P/1440x1080x25P/1440x1080x30P, 1280x1080x24P/1280x1080x25P/1280x1080x30P, 1280x720x24P/1280x720x25P/1280x720x30P, 704x576x25P (PAL, D1), 704x480x30P (NTSC, D1), 352x576x25P (PAL, Half D1), 352x480x30P (NTSC, Half D1) *Note
- Resolution — Output (MPEG2): 1280x1080x24P/1280x1080x25P/1280x1080x30P, 1280x720x24P/1280x720x25P/1280x720x30P, 704x576x25P (PAL, D1), 704x480x30P (NTSC, D1), 352x576x25P (PAL, Half D1), 352x480x30P (NTSC, Half D1) *Note
- Power: DC 9~24V, Power Consumption 0.7A@12V
- Dimension WxDxH: 195mm x 125mm x 40mm
- Weight: 735g
- Operating Temperature: -10°C ~ 60°C

- TV Standard: DVB-T EN-300 744, ISDB-T ARIB STD-B31, ISDB-Tb ABNT NBR 15601
- RF connector: 75-Ω F-type connector and two-wire terminal for twisted pairs (differential RF output)
- Bandwidth — DVB-T: 2/3/4/5/6/7/8 MHz
- Bandwidth — ISDB-T/-Tb: 6 MHz
- FFT: 2K, 4K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 100 .. 2500 MHz, tuning step 1KHz
- Segment & Layer — DVB-T: n/a
- Segment & Layer — ISDB-T/-Tb: 13 Seg or 1 Seg
- Time Interleaver — DVB-T: n/a
- Time Interleaver — ISDB-T/-Tb: Not supported
- RF Output Level: -3~-5 dBm (103-105 dBuV) @100-470 MHz; -5~-8 dBm (100-103 dBuV) @470-950 MHz; -14 dBm (94 dBuV) @950-1900MHz; -18 dBm (90 dBuV) @1900-2500MHz
- Digital Gain/Attenuator for Fine Tuning: Range: +0dB ~ -25dB, Step size 1dB
- MER: Typically, @-5 dB attenuation by ADRF6755: >35dB@V-band; >35dB@470-950 MHz; >33dB@950-1900MHz; >30dB@1900-2500MHz
- Spectrum Shoulder (Adjacent channel): 45dB
- Carrier Suppression: >42dB

Note: Note: output formats supported depend on the video input formats. The frame rate should be consistent and the encoded video frame size should be less or equal to the original input.
Note: There could be MER loss in high gain/attenuation level.
Note: Specifications are subject to change without prior notice.

#### HV-200J — Professional 4-band Full HD Digital TV Modulator

Page: https://hides.com.tw/en/ham/catalog/hv-200j/ · https://hides.com.tw/ham/catalog/hv-200j/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_HV200j_eng.html (archive, noindex)

HDMI/Composite to ISDB-T/ISDB-Tb

HV-200 is the most cost-effective solution to distribute HDMI or composite (CVBS) video to unlimited standard TV's without requiring any special adapter. The video input source from either HDMI/DVI or composite (CVBS) is encoded in MPEG2 or H.264 streams, modulated with the open industrial standard EN 300-744 DVB-T/ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb, and then transmitted over cable or air. All DVB-T/ISDB-T/ISDB-Tb compliant receivers, including SetTopBox, Digital TV, PC/NB USB DTV dongle, or DTV capture card can receive, and watch the video from a HV-200 via the standard coaxial cable or antenna.

Key specs: 100 .. 2500 MHz, tuning step 1 KHz · 6 MHz (ISDB-T/-Tb) · ISDB-T ARIB STD-B31 / ISDB-Tb ABNT NBR 15601

Features:
- **High Performance Wide Frequency Range Support** — Direct digital conversion to 100..2500 MHz for excellent signal quality. Professional grade modulation error rate (MER).
- **Low Cost HD Video Distribution** — Compliant to existing HD TV sets, no extra adapter required, and no restriction on the number of receivers. All the peripherals like splitter, amplifier, connector…etc are the same as those for regular TV.
- **Versatile video inputs and formats** — Support HDMI/DVI and composite (CVBS) video input. Besides H.264/MPEG2 HD, MPEG2 SD format is also supported and compliant to existing SD TV sets or STB's.
- **Easy to Configure** — Channel number can be configured with the built-in keypad switch easily. More advanced configurations can be set from an external host like PC/NB or Tablet/Pad thru USB interface.
- **Robust, Reliable and Long Distance** — Easily transmit 1080p video over a single 3C2V/RG59 cable for at least 500 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 20 dBm. The real distance depends on the antenna design and receiver quality. Differential RF output is also available for RF signal distribution with twisted pairs (telephone or Ethernet RJ-45) instead of heavy coaxial cables.
- **Daisy-chain Connection (Bus-Topology)** — Multiple HV-200's with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- **Real time protocol and Low latency** — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency.

- Input: Video: CVBS, HDMI 1.3 (with HDMI loop-thru); Audio: Stereo line-in or HDMI PCM audio-in (HDMI PCM audio-in supports up to stereo 96KHz, 24bits)
- Compression: Video: H.264 or MPEG2; Audio: AAC or MPEG
- Resolution — Input (CVBS): 720x480x30I (NTSC, D1), 720x576x25I (PAL, D1)
- Resolution — Input (HDMI): 720x480x30I (NTSC, D1), 720x576x25I (PAL, D1), 1280x720x24P, 1280x720x50I/1280x720x50P, 1280x720x60I/1280x720x60P, 1920x1080x24P, 1920x1080x50I/1920x1080x50P, 1920x1080x60I/1920x1080x60P
- Resolution — Output (H.264): 1920x1080x25P, 1600x1080x24P/1600x1080x25P/1600x1080x30P, 1440x1080x24P/1440x1080x25P/1440x1080x30P, 1280x1080x24P/1280x1080x25P/1280x1080x30P, 1280x720x24P/1280x720x25P/1280x720x30P, 704x576x25P (PAL, D1), 704x480x30P (NTSC, D1), 352x576x25P (PAL, Half D1), 352x480x30P (NTSC, Half D1) *Note
- Resolution — Output (MPEG2): 1280x1080x24P/1280x1080x25P/1280x1080x30P, 1280x720x24P/1280x720x25P/1280x720x30P, 704x576x25P (PAL, D1), 704x480x30P (NTSC, D1), 352x576x25P (PAL, Half D1), 352x480x30P (NTSC, Half D1) *Note
- Power: DC 9~24V, Power Consumption 0.7A@12V
- Dimension WxDxH: 195mm x 125mm x 40mm
- Weight: 735g
- Operating Temperature: -10°C ~ 60°C

- TV Standard: DVB-T EN-300 744, ISDB-T ARIB STD-B31, ISDB-Tb ABNT NBR 15601
- RF connector: 75-Ω F-type connector and two-wire terminal for twisted pairs (differential RF output)
- Bandwidth — DVB-T: 2/3/4/5/6/7/8 MHz
- Bandwidth — ISDB-T/-Tb: 6 MHz
- FFT: 2K, 4K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 100 .. 2500 MHz, tuning step 1KHz
- Segment & Layer — DVB-T: n/a
- Segment & Layer — ISDB-T/-Tb: 13 Seg or 1 Seg
- Time Interleaver — DVB-T: n/a
- Time Interleaver — ISDB-T/-Tb: Not supported
- RF Output Level: -3~-5 dBm (103-105 dBuV) @100-470 MHz; -5~-8 dBm (100-103 dBuV) @470-950 MHz; -14 dBm (94 dBuV) @950-1900MHz; -18 dBm (90 dBuV) @1900-2500MHz
- Digital Gain/Attenuator for Fine Tuning: Range: +0dB ~ -25dB, Step size 1dB
- MER: Typically, @-5 dB attenuation by ADRF6755: >35dB@V-band; >35dB@470-950 MHz; >33dB@950-1900MHz; >30dB@1900-2500MHz
- Spectrum Shoulder (Adjacent channel): 45dB
- Carrier Suppression: >42dB

Note: Note: output formats supported depend on the video input formats. The frame rate should be consistent and the encoded video frame size should be less or equal to the original input.
Note: There could be MER loss in high gain/attenuation level.
Note: Specifications are subject to change without prior notice.

#### HV-202E — Professional 4-band Full HD Digital TV Modulator

Page: https://hides.com.tw/en/ham/catalog/hv-202/ · https://hides.com.tw/ham/catalog/hv-202/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_HV202_eng.html (archive, noindex)

SDI/HD-SDI/HDMI to DVB-T

HV-202 is the most cost-effective solution to distribute HDMI or HD-SDI video to unlimited standard TV’s without requiring any special adapter. The video input source from either HDMI/DVI or HD-SDI is encoded in MPEG2 or H.264 streams, modulated with the open industrial standard EN 300-744 DVB-T/ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb, and then transmitted over cable or air. All DVB-T/ISDB-T/ISDB-Tb compliant receivers, including SetTopBox, Digital TV, PC/NB USB DTV dongle, or DTV capture card can receive, and watch the video from a HV-202 via the standard coaxial cable or antenna.

Key specs: 100 .. 2500MHz, tuning step 1KHz · DVB-T 1/2/3/4/5/6/7/8 MHz · DVB-T EN-300 744

Features:
- **High Performance Wide Frequency Range Support** — Direct digital conversion to 100..2500 MHz for excellent signal quality. Professional grade modulation error rate (MER).
- **Flexible Bandwidth Option** — In DVB-T mode, 1MHz~8MHz Bandwidth options are supported.
- **UART Digital Data Mux** — HV-202 supports UART data mux feature. GPS or aviation data can be multiplexed in the transmitted stream from HV-202’s UART port. Besides audio and video, the receiver can decode the received UART data for further data processing. The communication parameters for the data mux UART port are configurable.
- **Video Streaming and Web Management** — HV-202 supports network video streaming input/output and Web interface for remote management.
- **Low Cost HD Video Distribution** — Compliant to existing HD TV sets, no extra adapter required, and no restriction on the number of receivers. All the peripherals like splitter, amplifier, connector…etc are the same as those for regular TV.
- **Versatile video inputs and formats** — Support HDMI/DVI and HD-SDI video input. Besides H.264/MPEG2 HD, MPEG2 SD format is also supported and compliant to existing SD TV sets or STB’s.
- **Easy to Configure** — Channel number can be configured with the built-in keypad switch easily. More advanced configurations can be set from an external host like PC/NB or Tablet/Pad thru USB interface. Remote Web management is also supported.
- **Robust, Reliable and Long Distance** — Easily transmit 1080p video over a single 3C2V/RG59 cable for at least 500 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 30 dBm with an optional PA. The real distance depends on the antenna design and receiver quality. Differential RF output is also available for RF signal distribution with twisted pairs (telephone or Ethernet RJ-45) instead of heavy coaxial cables.
- **Daisy-chain Connection (Bus-Topology)** — Multiple HV-202’s with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- **Real time protocol and Low latency** — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency.

- Input — Video: 1. HD-SDI 2. HDMI 1.3 (with HDMI loop-thru)
- Input — Audio: 1. HD-SDI embedded audio (48K stereo only) 2. HDMI PCM audio-in (supports up to stereo 96KHz, 24bits) 3. External analog Line-in
- Compression: Video: H.264 or MPEG2 Audio: AAC or MPEG
- Resolution — Input (HD-SDI): 1920x1080x60P, 1920x1080x60I, 1920x1080x30P 1920x1080x50P, 1920x1080x50I, 1920x1080x25P 1920x1080x24P 1280x720x60P 1280x720x50P
- Resolution — Input (HDMI): 720x480x30I (NTSC, D1) 720x576x25I (PAL, D1) 1280x720x24P 1280x720x50I/1280x720x50P 1280x720x60I/1280x720x60P 1920x1080x24P 1920x1080x50I/1920x1080x50P 1920x1080x60I/1920x1080x60P
- Resolution — Output (H.264): 1920x1080x24P/1920x1080x25P 1600x1080x24P/1600x1080x25P/1600x1080x30P 1440x1080x24P/1440x1080x25P/1440x1080x30 1280x1080x24P/1280x1080x25P/1280x1080x30 1280x720x24P/1280x720x25P/1280x720x30P 704x576x25P (PAL, D1) 704x480x30P (NTSC, D1) 352x576x25P (PAL, Half D1) 352x480x30P (NTSC, Half D1)
- Resolution — Output (MPEG2): 1280x1080x24P/1280x1080x25P/1280x1080x30P 1280x720x24P/1280x720x25P/1280x720x30P 704x576x25P (PAL, D1) 704x480x30P (NTSC, D1) 352x576x25P (PAL, Half D1) 352x480x30P (NTSC, Half D1)
- Power: DC 9~24V Power Consumption 1A@12V
- Dimension WxDxH: 195mmx125mmx40mm
- Weight: 735g
- Operating Temperature: -10℃ ~ 60℃

- TV Standard: DVB-T EN-300 744 ISDB-T ARIB STD-B31 ISDB-Tb ABNT NBR 15601
- RF connector: 75-Ω F-type connector
- Bandwidth: DVB-T: 1/2/3/4/5/6/7/8 MHz ISDB-T: 6MHz
- FFT: 2K, 4K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 100 .. 2500MHz, tuning step 1KHz
- Segment & Layer: DVB-T: n/a ISDB-T: 13 Seg or 1 Seg
- Time Interleaver: DVB-T: n/a ISDB-T: Not supported
- RF Output Level: -3~-5 dBm (103-105 dBuV) @100-470 MHz -5~-8 dBm (100-103 dBuV) @470-950 MHz -14 dBm (94 dBuV) @950-1900MHz -18 dBm (90 dBuV) @1900-2500MHz
- Digital Gain/Attenuator for Fine Tuning: Range: +0/-25dB, Step size 1dB
- MER: Typically, @-5 dB attenuation by ADRF6755 >39dB@V-band >39dB@470-950 MHz >36dB@950-1900MHz >34dB@1900-2500MHz
- Spectrum Shoulder (Adjacent channel): >48dB
- Phase noise: <-114dBc @ 100kHz
- Carrier Suppression: >42dB

- Remote Management: Web Server for remote access Transmission Configurations Status Monitor
- Video Streaming Output: RTSP streaming input DVBT/ISDBT TV RF output Video: H.264 or MPEG2 Audio: AAC or MPEG Support RTSP TS or PES Payload

Note: Note: output formats supported depend on the video input formats. The frame rate should be consistent and the encoded video frame size should be less or equal to the original input.
Note: There could be MER loss in high gain/attenuation level.
Note: Specifications are subject to change without prior notice.

#### HV-202J — Professional 4-band Full HD Digital TV Modulator

Page: https://hides.com.tw/en/ham/catalog/hv-202j/ · https://hides.com.tw/ham/catalog/hv-202j/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_HV202j_eng.html (archive, noindex)

SDI/HD-SDI/HDMI to ISDB-T/ISDB-Tb

HV-202 is the most cost-effective solution to distribute HDMI or HD-SDI video to unlimited standard TV’s without requiring any special adapter. The video input source from either HDMI/DVI or HD-SDI is encoded in MPEG2 or H.264 streams, modulated with the open industrial standard EN 300-744 DVB-T/ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb, and then transmitted over cable or air. All DVB-T/ISDB-T/ISDB-Tb compliant receivers, including SetTopBox, Digital TV, PC/NB USB DTV dongle, or DTV capture card can receive, and watch the video from a HV-202 via the standard coaxial cable or antenna.

Key specs: 100 .. 2500MHz, tuning step 1KHz · ISDB-T 6MHz · ISDB-T ARIB STD-B31 / ISDB-Tb ABNT NBR 15601

Features:
- **High Performance Wide Frequency Range Support** — Direct digital conversion to 100..2500 MHz for excellent signal quality. Professional grade modulation error rate (MER).
- **Flexible Bandwidth Option** — In DVB-T mode, 1MHz~8MHz Bandwidth options are supported.
- **UART Digital Data Mux** — HV-202 supports UART data mux feature. GPS or aviation data can be multiplexed in the transmitted stream from HV-202’s UART port. Besides audio and video, the receiver can decode the received UART data for further data processing. The communication parameters for the data mux UART port are configurable.
- **Video Streaming and Web Management** — HV-202 supports network video streaming input/output and Web interface for remote management.
- **Low Cost HD Video Distribution** — Compliant to existing HD TV sets, no extra adapter required, and no restriction on the number of receivers. All the peripherals like splitter, amplifier, connector…etc are the same as those for regular TV.
- **Versatile video inputs and formats** — Support HDMI/DVI and HD-SDI video input. Besides H.264/MPEG2 HD, MPEG2 SD format is also supported and compliant to existing SD TV sets or STB’s.
- **Easy to Configure** — Channel number can be configured with the built-in keypad switch easily. More advanced configurations can be set from an external host like PC/NB or Tablet/Pad thru USB interface. Remote Web management is also supported.
- **Robust, Reliable and Long Distance** — Easily transmit 1080p video over a single 3C2V/RG59 cable for at least 500 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 30 dBm with an optional PA. The real distance depends on the antenna design and receiver quality. Differential RF output is also available for RF signal distribution with twisted pairs (telephone or Ethernet RJ-45) instead of heavy coaxial cables.
- **Daisy-chain Connection (Bus-Topology)** — Multiple HV-202’s with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- **Real time protocol and Low latency** — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency.

- Input — Video: 1. HD-SDI 2. HDMI 1.3 (with HDMI loop-thru)
- Input — Audio: 1. HD-SDI embedded audio (48K stereo only) 2. HDMI PCM audio-in (supports up to stereo 96KHz, 24bits) 3. External analog Line-in
- Compression: Video: H.264 or MPEG2 Audio: AAC or MPEG
- Resolution — Input (HD-SDI): 1920x1080x60P, 1920x1080x60I, 1920x1080x30P 1920x1080x50P, 1920x1080x50I, 1920x1080x25P 1920x1080x24P 1280x720x60P 1280x720x50P
- Resolution — Input (HDMI): 720x480x30I (NTSC, D1) 720x576x25I (PAL, D1) 1280x720x24P 1280x720x50I/1280x720x50P 1280x720x60I/1280x720x60P 1920x1080x24P 1920x1080x50I/1920x1080x50P 1920x1080x60I/1920x1080x60P
- Resolution — Output (H.264): 1920x1080x24P/1920x1080x25P 1600x1080x24P/1600x1080x25P/1600x1080x30P 1440x1080x24P/1440x1080x25P/1440x1080x30 1280x1080x24P/1280x1080x25P/1280x1080x30 1280x720x24P/1280x720x25P/1280x720x30P 704x576x25P (PAL, D1) 704x480x30P (NTSC, D1) 352x576x25P (PAL, Half D1) 352x480x30P (NTSC, Half D1)
- Resolution — Output (MPEG2): 1280x1080x24P/1280x1080x25P/1280x1080x30P 1280x720x24P/1280x720x25P/1280x720x30P 704x576x25P (PAL, D1) 704x480x30P (NTSC, D1) 352x576x25P (PAL, Half D1) 352x480x30P (NTSC, Half D1)
- Power: DC 9~24V Power Consumption 1A@12V
- Dimension WxDxH: 195mmx125mmx40mm
- Weight: 735g
- Operating Temperature: -10℃ ~ 60℃

- TV Standard: DVB-T EN-300 744 ISDB-T ARIB STD-B31 ISDB-Tb ABNT NBR 15601
- RF connector: 75-Ω F-type connector
- Bandwidth: DVB-T: 1/2/3/4/5/6/7/8 MHz ISDB-T: 6MHz
- FFT: 2K, 4K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 100 .. 2500MHz, tuning step 1KHz
- Segment & Layer: DVB-T: n/a ISDB-T: 13 Seg or 1 Seg
- Time Interleaver: DVB-T: n/a ISDB-T: Not supported
- RF Output Level: -3~-5 dBm (103-105 dBuV) @100-470 MHz -5~-8 dBm (100-103 dBuV) @470-950 MHz -14 dBm (94 dBuV) @950-1900MHz -18 dBm (90 dBuV) @1900-2500MHz
- Digital Gain/Attenuator for Fine Tuning: Range: +0/-25dB, Step size 1dB
- MER: Typically, @-5 dB attenuation by ADRF6755 >39dB@V-band >39dB@470-950 MHz >36dB@950-1900MHz >34dB@1900-2500MHz
- Spectrum Shoulder (Adjacent channel): >48dB
- Phase noise: <-114dBc @ 100kHz
- Carrier Suppression: >42dB

- Remote Management: Web Server for remote access Transmission Configurations Status Monitor
- Video Streaming Output: RTSP streaming input DVBT/ISDBT TV RF output Video: H.264 or MPEG2 Audio: AAC or MPEG Support RTSP TS or PES Payload

Note: Note: output formats supported depend on the video input formats. The frame rate should be consistent and the encoded video frame size should be less or equal to the original input.
Note: There could be MER loss in high gain/attenuation level.
Note: Specifications are subject to change without prior notice.

#### HV-310E/EH — FPV Full HD Video Transmitter

Page: https://hides.com.tw/en/ham/catalog/hv-310e/ · https://hides.com.tw/ham/catalog/hv-310e/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_HV310e_eng.html (archive, noindex)

HDMI/CVBS to DVB-T Modulator

HV-310 is the most cost-effective solution to transmit long range HD video for FPV application with digital TV technology. The video input source from either HDMI/DVI or composite (CVBS) is encoded in H.264 streams, modulated with the open industrial standard EN 300-744 DVB-T/ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb, and then transmitted over cable or air. All DVB-T/ISDB-T/ISDB-Tb compliant receivers, including SetTopBox, Digital TV, PC/NB USB DTV dongle, or DTV capture card can receive, and watch the video from a HV-310 via the standard coaxial cable or antenna. HV-310E supports EN 300-744 DVB-T modulation while HV-310J supports ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb modulation. (Note: HV-310J supports only H.264 encoding while old Japan ISDB-T TV cannot support it.) HV-310 supports 170MHz~1350MHz (excluding 950~1090MHz) band transmission. With embedded high power amplifier design, the RF output power can reach up to +15dBm for the frequency range 474~930MHz. HV-310EH/HV-310JH is special edition with high gain design for 1.2G band, which supports higher output power in 1.2G band while lower in 170-950MHz band.

Key specs: 170~1350MHz, step size 1KHz · DVB-T 1/2/3/4/5/6/7/8 MHz · DVB-T EN-300 744

Features:
- **High Performance Wide Frequency Range Support** — Direct digital conversion to 170~1350MHz (excluding 950~1090MHz) for excellent signal quality. Professional grade modulation error rate (MER). With embedded high power amplifier design, the RF output power can reach up to +15dBm for the frequency range 474~930MHz.
- **Low Cost HD Video Distribution** — Compliant to existing HD TV sets, no extra adapter required, and no restriction on the number of receivers. All the peripherals like splitter, amplifier, connector…etc are the same as those for regular TV. In DVB-T mode, 1MHz~8MHz Bandwidth options are supported.
- **Versatile video inputs** — Support HDMI/DVI and composite (CVBS) video input.
- **Easy to Configure** — Channel number can be configured with the IR RC easily. More advanced configurations can be set from an external host like PC/NB thru serial port interface.
- **Robust, Reliable and Long Distance** — Easily transmit 1080p video over a single 3C2V/RG59 cable for at least 500 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 30 dBm with an external PA. The real distance depends on the antenna design and receiver quality. Differential RF output is also available for RF signal distribution with twisted pairs (telephone or Ethernet RJ-45) instead of heavy coaxial cables.
- **Daisy-chain Connection (Bus-Topology)** — Multiple HV-310’s with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- **Real time protocol and Low latency** — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency.

- Input: Video: CVBS, HDMI 1.3 Audio: Stereo line-in or HDMI PCM audio-in
- Compression: Video: H.264 Audio: AAC or MPEG
- Resolution — Input (CVBS): 720x480x30I (NTSC, D1) 720x576x25I (PAL, D1)
- Resolution — Input (HDMI): 720x480x30I (NTSC, D1) 720x576x25I (PAL, D1) 1280x720x50I/1280x720x50P 1280x720x60I/1280x720x60P 1920x1080x24P 1920x1080x50I/1920x1080x50P 1920x1080x60I/1920x1080x60P
- Video Output: Compression: H.264 Frame size: 720x480x30P (NTSC, D1) 720x576x25P (PAL, D1) 1280x720x25P 1280x720x30P 1920x1080x24P 1920x1080x25P 1920x1080x30P Note: the output frame size is the same as the input, no scale-up or scale-down feature supported
- Power — HV-310 without PA: 5 V or 6~16V DC 800 mA@5V (AV Sender TX V01 5V only)
- Power — HV-310-PA900 / HV-310-PA1200: 5 or 6~12V DC 1450 mA@5V
- Dimension WxDxH: W(105 mm) x D(75 mm) x H(35 mm) (Bare bone PCBA size: 100mmx70mm)
- Weight: 175g (Bare bone PCBA weight 55g)
- Operating Temperature: -10℃ ~ 60℃

- TV Standard: HV-310E/EH: DVB-T EN-300 744 HV-310J/JH: ISDB-T ARIB STD-B31, ISDB-Tb ABNT NBR 15601
- RF connector: 50-Ω SMA connector
- Bandwidth: HV-310E/EH: 1/2/3/4/5/6/7/8 MHz HV-310J/JH: 6MHz
- FFT: 2K, 4K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 170~1350MHz, step size 1KHz
- Segment & Layer: HV-310E: n/a HV-310J: 13 Seg ONLY
- Time Interleaver: HV-310E: n/a HV-310J: Not supported
- RF Output Level — HV-310E/HV-310J: @177.5 MHz — Max 5, Hi-gain 0, Low-gain -20 dBm @474 MHz — Max 15, Hi-gain 10, Low-gain -10 dBm @666 MHz — Max 16, Hi-gain 11, Low-gain -7 dBm @858 MHz — Max 15, Hi-gain 10, Low-gain -8 dBm @915 MHz — Max 14, Hi-gain 9, Low-gain -9 dBm @1250 MHz — Max 0.5, Hi-gain -4.5, Low-gain -21 dBm
- RF Output Level — HV-310EH/HV-310JH: @177.5 MHz — Max -10, Hi-gain -14.5, Low-gain -34 dBm @474 MHz — Max 7, Hi-gain 2, Low-gain -18 dBm @666 MHz — Max 10.5, Hi-gain 5.5, Low-gain -14 dBm @858 MHz — Max 11.5, Hi-gain 6.5, Low-gain -14 dBm @915 MHz — Max 11.5, Hi-gain 6.5, Low-gain -14 dBm @1250 MHz — Max 5, Hi-gain 2.2, Low-gain -18 dBm
- RF Output Level — HV-310EH-PA1200 / HV-310JH-PA1200 (with 1.2G Power Amplifier): 1200~1350MHz — Max: 22 dBm, Hi-gain: 19 dBm, Low-gain: -1 dBm
- Digital Gain/Attenuator for Fine Tuning: Range: +5dB~-10dB, Step size 1dB (Default: +0dB)
- MER: 170~1350MHz, 25~33 dB (950~1090 MHz is not supported)
- Spectrum Shoulder (Adjacent channel): 40dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB

Note: There could be MER loss in high gain/attenuation level.
Note: HV-310E/HV-310J vs HV-310EH/HV-310JH RF output power.
Note: Specifications are subject to change without prior notice.

#### HV-310J/JH — FPV Full HD Video Transmitter

Page: https://hides.com.tw/en/ham/catalog/hv-310j/ · https://hides.com.tw/ham/catalog/hv-310j/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_HV310j_eng.html (archive, noindex)

HDMI/CVBS to ISDB-T/ISDB-Tb Modulator

HV-310 is the most cost-effective solution to transmit long range HD video for FPV application with digital TV technology. The video input source from either HDMI/DVI or composite (CVBS) is encoded in H.264 streams, modulated with the open industrial standard EN 300-744 DVB-T/ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb, and then transmitted over cable or air. All DVB-T/ISDB-T/ISDB-Tb compliant receivers, including SetTopBox, Digital TV, PC/NB USB DTV dongle, or DTV capture card can receive, and watch the video from a HV-310 via the standard coaxial cable or antenna. HV-310E supports EN 300-744 DVB-T modulation while HV-310J supports ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb modulation. (Note: HV-310J supports only H.264 encoding while old Japan ISDB-T TV cannot support it.) HV-310 supports 170MHz~1350MHz (excluding 950~1090MHz) band transmission. With embedded high power amplifier design, the RF output power can reach up to +15dBm for the frequency range 474~930MHz. HV-310EH/HV-310JH is special edition with high gain design for 1.2G band, which supports higher output power in 1.2G band while lower in 170-950MHz band.

Key specs: 170~1350MHz, step size 1KHz · ISDB-T 6MHz · ISDB-T ARIB STD-B31 / ISDB-Tb ABNT NBR 15601

Features:
- **High Performance Wide Frequency Range Support** — Direct digital conversion to 170~1350MHz (excluding 950~1090MHz) for excellent signal quality. Professional grade modulation error rate (MER). With embedded high power amplifier design, the RF output power can reach up to +15dBm for the frequency range 474~930MHz.
- **Low Cost HD Video Distribution** — Compliant to existing HD TV sets, no extra adapter required, and no restriction on the number of receivers. All the peripherals like splitter, amplifier, connector…etc are the same as those for regular TV. In DVB-T mode, 1MHz~8MHz Bandwidth options are supported.
- **Versatile video inputs** — Support HDMI/DVI and composite (CVBS) video input.
- **Easy to Configure** — Channel number can be configured with the IR RC easily. More advanced configurations can be set from an external host like PC/NB thru serial port interface.
- **Robust, Reliable and Long Distance** — Easily transmit 1080p video over a single 3C2V/RG59 cable for at least 500 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 30 dBm with an external PA. The real distance depends on the antenna design and receiver quality. Differential RF output is also available for RF signal distribution with twisted pairs (telephone or Ethernet RJ-45) instead of heavy coaxial cables.
- **Daisy-chain Connection (Bus-Topology)** — Multiple HV-310’s with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- **Real time protocol and Low latency** — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency.

- Input: Video: CVBS, HDMI 1.3 Audio: Stereo line-in or HDMI PCM audio-in
- Compression: Video: H.264 Audio: AAC or MPEG
- Resolution — Input (CVBS): 720x480x30I (NTSC, D1) 720x576x25I (PAL, D1)
- Resolution — Input (HDMI): 720x480x30I (NTSC, D1) 720x576x25I (PAL, D1) 1280x720x50I/1280x720x50P 1280x720x60I/1280x720x60P 1920x1080x24P 1920x1080x50I/1920x1080x50P 1920x1080x60I/1920x1080x60P
- Video Output: Compression: H.264 Frame size: 720x480x30P (NTSC, D1) 720x576x25P (PAL, D1) 1280x720x25P 1280x720x30P 1920x1080x24P 1920x1080x25P 1920x1080x30P Note: the output frame size is the same as the input, no scale-up or scale-down feature supported
- Power — HV-310 without PA: 5 V or 6~16V DC 800 mA@5V (AV Sender TX V01 5V only)
- Power — HV-310-PA900 / HV-310-PA1200: 5 or 6~12V DC 1450 mA@5V
- Dimension WxDxH: W(105 mm) x D(75 mm) x H(35 mm) (Bare bone PCBA size: 100mmx70mm)
- Weight: 175g (Bare bone PCBA weight 55g)
- Operating Temperature: -10℃ ~ 60℃

- TV Standard: HV-310E/EH: DVB-T EN-300 744 HV-310J/JH: ISDB-T ARIB STD-B31, ISDB-Tb ABNT NBR 15601
- RF connector: 50-Ω SMA connector
- Bandwidth: HV-310E/EH: 1/2/3/4/5/6/7/8 MHz HV-310J/JH: 6MHz
- FFT: 2K, 4K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 170~1350MHz, step size 1KHz
- Segment & Layer: HV-310E: n/a HV-310J: 13 Seg ONLY
- Time Interleaver: HV-310E: n/a HV-310J: Not supported
- RF Output Level — HV-310E/HV-310J: @177.5 MHz — Max 5, Hi-gain 0, Low-gain -20 dBm @474 MHz — Max 15, Hi-gain 10, Low-gain -10 dBm @666 MHz — Max 16, Hi-gain 11, Low-gain -7 dBm @858 MHz — Max 15, Hi-gain 10, Low-gain -8 dBm @915 MHz — Max 14, Hi-gain 9, Low-gain -9 dBm @1250 MHz — Max 0.5, Hi-gain -4.5, Low-gain -21 dBm
- RF Output Level — HV-310EH/HV-310JH: @177.5 MHz — Max -10, Hi-gain -14.5, Low-gain -34 dBm @474 MHz — Max 7, Hi-gain 2, Low-gain -18 dBm @666 MHz — Max 10.5, Hi-gain 5.5, Low-gain -14 dBm @858 MHz — Max 11.5, Hi-gain 6.5, Low-gain -14 dBm @915 MHz — Max 11.5, Hi-gain 6.5, Low-gain -14 dBm @1250 MHz — Max 5, Hi-gain 2.2, Low-gain -18 dBm
- RF Output Level — HV-310EH-PA1200 / HV-310JH-PA1200 (with 1.2G Power Amplifier): 1200~1350MHz — Max: 22 dBm, Hi-gain: 19 dBm, Low-gain: -1 dBm
- Digital Gain/Attenuator for Fine Tuning: Range: +5dB~-10dB, Step size 1dB (Default: +0dB)
- MER: 170~1350MHz, 25~33 dB (950~1090 MHz is not supported)
- Spectrum Shoulder (Adjacent channel): 40dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB

Note: There could be MER loss in high gain/attenuation level.
Note: HV-310E/HV-310J vs HV-310EH/HV-310JH RF output power.
Note: Specifications are subject to change without prior notice.

#### HV-320E — FPV Full HD Video Transmitter

Page: https://hides.com.tw/en/ham/catalog/hv-320/ · https://hides.com.tw/ham/catalog/hv-320/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_HV320_eng.html (archive, noindex)

HDMI/CVBS to DVB-T Modulator

HV-320 is the most cost-effective solution to transmit long range HD video for FPV application with digital TV technology. The video input source from either HDMI/DVI or composite (CVBS) is encoded in H.264 streams, modulated with the open industrial standard EN 300-744 DVB-T/ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb*, and then transmitted over cable or air. All DVB-T/ISDB-T/ISDB-Tb compliant receivers**, including SetTopBox, Digital TV, PC/NB USB DTV dongle, or DTV capture card can receive, and watch the video from a HV-320 via the standard coaxial cable or antenna.

Key specs: 100~2500MHz, step size 1KHz · DVB-T 1/2/3/4/5/6/7/8 MHz · DVB-T EN-300 744

Features:
- **High Performance Wide Frequency Range Support** — Direct digital conversion to 100..2500 MHz for excellent signal quality. Professional grade modulation error rate (MER).
- **Flexible Bandwidth Option** — In DVB-T mode, 1MHz~8MHz Bandwidth options are supported.
- **UART Digital Data Mux** — HV-320 supports UART data mux feature. GPS or aviation data can be multiplexed in the transmitted stream from HV-320’s UART port. Besides audio and video, the receiver can decode the received UART data for further data processing. The communication parameters for the data mux UART port are configurable.
- **Security for anti-eavesdropping** — Support both RF layer and TS data layer encryption.
- **Low Cost HD Video Distribution** — Compliant to existing HD TV sets, no extra adapter required, and no restriction on the number of receivers. All the peripherals like splitter, amplifier, connector…etc are the same as those for regular TV. In DVB-T mode, 1MHz~8MHz Bandwidth options are supported.
- **Versatile video inputs** — Support HDMI/DVI and composite (CVBS) video input.
- **Easy to Configure** — Channel number can be switched with the IR RC or onboard push buttons easily. The channel list mapping is user configurable (channel number -> frequency/bandwidth). More advanced configurations can be set from an external host like PC/NB thru serial port interface. UART control protocol and API/SDK available on request.
- **Robust, Reliable and Long Distance** — Easily transmit 1080p video over a single 3C2V/RG59 cable for at least 500 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 30 dBm with an external PA. The real distance depends on the antenna design and receiver quality. Differential RF output is also available for RF signal distribution with twisted pairs (telephone or Ethernet RJ-45) instead of heavy coaxial cables.
- **Daisy-chain Connection (Bus-Topology)** — Multiple HV-320’s with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- **Real time protocol and Low latency** — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency. With HV-120/HV-110, the latency for 1080P HD is about 250mS.

- Input: Video: CVBS, HDMI 1.3 Audio: Stereo line-in or HDMI PCM audio-in
- Compression: Video: H.264 Audio: AAC or MPEG
- Resolution — Input (CVBS): 720x480x30I (NTSC, D1) 720x576x25I (PAL, D1)
- Resolution — Input (HDMI): 720x480x30I (NTSC, D1) 720x576x25I (PAL, D1) 1280x720x50I/1280x720x50P 1280x720x60I/1280x720x60P 1920x1080x24P 1920x1080x50I/1920x1080x50P 1920x1080x60I/1920x1080x60P
- Video Output: Compression: H.264 Frame size: 720x480x30P (NTSC, D1) 720x576x25P (PAL, D1) 1280x720x25P 1280x720x30P 1920x1080x24P 1920x1080x25P 1920x1080x30P Note: the output frame size is the same as the input, no scale-up or scale-down feature supported
- Power — HV-320 without PA: 5 V or 6~16V DC 1420 mA@5V 470mA@12V
- Power — HV-320-PA430 / HV-320-PA700: 12V DC 850mA@12V
- Power — HV-320-PA900 / HV-320-PA1200 / HV-320-PA2400: 5V or 12V DC 2050mA@5V 720mA@12V
- Dimension WxDxH: W(105 mm) x D(75 mm) x H(35 mm) (Bare bone PCBA size: 100mmx70mm)
- Weight: 175g (Bare bone PCBA weight 55g)
- Operating Temperature: -10℃ ~ 60℃

- TV Standard: HV-320E: DVB-T EN-300 744 HV-320J: ISDB-T ARIB STD-B31, ISDB-Tb ABNT NBR 15601
- RF connector: 50-Ω SMA connector
- Bandwidth: HV-320E: 1/2/3/4/5/6/7/8 MHz HV-320J: 6MHz
- FFT: 2K, 4K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 100~2500MHz, step size 1KHz
- Segment & Layer: HV-320E: n/a HV-320J: 13 Seg
- Time Interleaver: HV-320E: n/a HV-320J: Not supported
- RF Output Level — HV-320E/HV-320J (Max): @177.5 MHz: 6.5 dBm @474 MHz: 6.5 dBm @666 MHz: 6.5 dBm @915 MHz: 5.5 dBm @1250 MHz: 5.5 dBm @2450 MHz: 0 dBm
- RF Output Level — HV-320E-PA430 / HV-320J-PA430: 400~500MHz +20 dBm (with 400~500MHz Power Amplifier)
- RF Output Level — HV-320E-PA700 / HV-320J-PA700: 500~700MHz +20 dBm (with 500~700MHz Power Amplifier)
- RF Output Level — HV-320E-PA900 / HV-320J-PA900: 800~950MHz +20 dBm (with 900MHz Power Amplifier)
- RF Output Level — HV-320E-PA1200 / HV-320J-PA1200: 1200~1350Mz +20 dBm (with 1.2G Power Amplifier)
- RF Output Level — HV-320E-PA2400 / HV-320J-PA2400: 2400~2500Mz +20 dBm (with 2.4G Power Amplifier)
- Digital Gain/Attenuator for Fine Tuning: Range: +0dB~-25dB, Step size 1dB Default: -5dB
- MER: Typically, @-5 dB attenuation by ADRF6755 >38dB@V-band >38dB@470-950 MHz >35dB@950-1900MHz >33dB@1900-2500MHz (>25dB with 700M/900M/1.2G/2.4G +20 dBm output PA)
- Spectrum Shoulder (Adjacent channel): >48dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB

Note: HV-320E supports EN 300-744 DVB-T modulation while HV-320J supports ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb modulation.
Note: HV-320 supports only H.264 video encoding, so the receiver should be able to decode H.264 stream while old DVB-T/ISDB-T TV’s may not.
Note: The PA output power designated is average power for OFDM output, while the peak power for sine tone output is around 30dBm, 1W.
Note: There could be MER loss in high gain/attenuation level.
Note: Specifications are subject to change without prior notice.

#### HV-320J — FPV Full HD Video Transmitter

Page: https://hides.com.tw/en/ham/catalog/hv-320j/ · https://hides.com.tw/ham/catalog/hv-320j/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_HV320j_eng.html (archive, noindex)

HDMI/CVBS to ISDB-T/ISDB-Tb Modulator

HV-320 is the most cost-effective solution to transmit long range HD video for FPV application with digital TV technology. The video input source from either HDMI/DVI or composite (CVBS) is encoded in H.264 streams, modulated with the open industrial standard EN 300-744 DVB-T/ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb*, and then transmitted over cable or air. All DVB-T/ISDB-T/ISDB-Tb compliant receivers**, including SetTopBox, Digital TV, PC/NB USB DTV dongle, or DTV capture card can receive, and watch the video from a HV-320 via the standard coaxial cable or antenna.

Key specs: 100~2500MHz, step size 1KHz · ISDB-T 6MHz · ISDB-T ARIB STD-B31 / ISDB-Tb ABNT NBR 15601

Features:
- **High Performance Wide Frequency Range Support** — Direct digital conversion to 100..2500 MHz for excellent signal quality. Professional grade modulation error rate (MER).
- **Flexible Bandwidth Option** — In DVB-T mode, 1MHz~8MHz Bandwidth options are supported.
- **UART Digital Data Mux** — HV-320 supports UART data mux feature. GPS or aviation data can be multiplexed in the transmitted stream from HV-320’s UART port. Besides audio and video, the receiver can decode the received UART data for further data processing. The communication parameters for the data mux UART port are configurable.
- **Security for anti-eavesdropping** — Support both RF layer and TS data layer encryption.
- **Low Cost HD Video Distribution** — Compliant to existing HD TV sets, no extra adapter required, and no restriction on the number of receivers. All the peripherals like splitter, amplifier, connector…etc are the same as those for regular TV. In DVB-T mode, 1MHz~8MHz Bandwidth options are supported.
- **Versatile video inputs** — Support HDMI/DVI and composite (CVBS) video input.
- **Easy to Configure** — Channel number can be configured with the IR RC easily. More advanced configurations can be set from an external host like PC/NB thru serial port interface.
- **Robust, Reliable and Long Distance** — Easily transmit 1080p video over a single 3C2V/RG59 cable for at least 500 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 30 dBm with an external PA. The real distance depends on the antenna design and receiver quality. Differential RF output is also available for RF signal distribution with twisted pairs (telephone or Ethernet RJ-45) instead of heavy coaxial cables.
- **Daisy-chain Connection (Bus-Topology)** — Multiple HV-320’s with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- **Real time protocol and Low latency** — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency.

- Input: Video: CVBS, HDMI 1.3 Audio: Stereo line-in or HDMI PCM audio-in
- Compression: Video: H.264 Audio: AAC or MPEG
- Resolution — Input (CVBS): 720x480x30I (NTSC, D1) 720x576x25I (PAL, D1)
- Resolution — Input (HDMI): 720x480x30I (NTSC, D1) 720x576x25I (PAL, D1) 1280x720x50I/1280x720x50P 1280x720x60I/1280x720x60P 1920x1080x24P 1920x1080x50I/1920x1080x50P 1920x1080x60I/1920x1080x60P
- Video Output: Compression: H.264 Frame size: 720x480x30P (NTSC, D1) 720x576x25P (PAL, D1) 1280x720x25P 1280x720x30P 1920x1080x24P 1920x1080x25P 1920x1080x30P Note: the output frame size is the same as the input, no scale-up or scale-down feature supported
- Power — HV-320 without PA: 5 V or 6~16V DC 1420 mA@5V 470mA@12V
- Power — HV-320-PA700 / HV-320-PA900 / HV-320-PA1200 / HV-320-PA2400: 5V or 12V DC 2050mA@5V 720mA@12V
- Dimension WxDxH: W(105 mm) x D(75 mm) x H(35 mm) (Bare bone PCBA size: 100mmx70mm)
- Weight: 175g (Bare bone PCBA weight 55g)
- Operating Temperature: -10℃ ~ 60℃

- TV Standard: HV-320E: DVB-T EN-300 744 HV-320J: ISDB-T ARIB STD-B31, ISDB-Tb ABNT NBR 15601
- RF connector: 50-Ω SMA connector
- Bandwidth: HV-320E: 1/2/3/4/5/6/7/8 MHz HV-320J: 6MHz
- FFT: 2K, 4K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 100~2500MHz, step size 1KHz
- Segment & Layer: HV-320E: n/a HV-320J: 13 Seg or 1 Seg
- Time Interleaver: HV-320E: n/a HV-320J: Not supported
- RF Output Level — HV-320E/HV-320J (Max): @177.5 MHz: 6.5 dBm @474 MHz: 6.5 dBm @666 MHz: 6.5 dBm @915 MHz: 5.5 dBm @1250 MHz: 5.5 dBm @2450 MHz: 0 dBm
- RF Output Level — HV-320E-PA700 / HV-320J-PA700: 500~800MHz +20 dBm (with 500~800MHz Power Amplifier)
- RF Output Level — HV-320E-PA900 / HV-320J-PA900: 800~950MHz +20 dBm (with 900MHz Power Amplifier)
- RF Output Level — HV-320E-PA1200 / HV-320J-PA1200: 1200~1350Mz +20 dBm (with 1.2G Power Amplifier)
- RF Output Level — HV-320E-PA2400 / HV-320J-PA2400: 2400~2500Mz +20 dBm (with 2.4G Power Amplifier)
- Digital Gain/Attenuator for Fine Tuning: Range: +0dB~-25dB, Step size 1dB Default: -5dB (Default: -17dB for HV-320-PA2400)
- MER: Typically, @-5 dB attenuation by ADRF6755 >38dB@V-band >38dB@470-950 MHz >35dB@950-1900MHz >33dB@1900-2500MHz (>25dB with 700M/900M/1.2G/2.4G +20 dBm output PA)
- Spectrum Shoulder (Adjacent channel): >48dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB

Note: HV-320E supports EN 300-744 DVB-T modulation while HV-320J supports ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb modulation.
Note: HV-320 supports only H.264 video encoding, so the receiver should be able to decode H.264 stream while old DVB-T/ISDB-T TV’s may not.
Note: There could be MER loss in high gain/attenuation level.
Note: Specifications are subject to change without prior notice.

#### HV-100E/HV-100J/HV-100EH — Full HD Digital TV Modulator

Page: https://hides.com.tw/en/ham/catalog/hv-100/ · https://hides.com.tw/ham/catalog/hv-100/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_cg74468_eng.html (archive, noindex)

HDMI/CVBS to DVB-T/ISDB-T/ISDB-Tb

HV-100 is the most cost-effective solution to distribute HDMI or composite (CVBS) video to unlimited standard TV's without requiring any special adapter. The video input source from either HDMI/DVI or composite (CVBS) is encoded in MPEG2 or H.264 streams, modulated with the open industrial standard EN 300-744 DVB-T/ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb, and then transmitted over cable or air. All DVB-T/ISDB-T/ISDB-Tb compliant receivers, including SetTopBox, Digital TV, PC/NB USB DTV dongle, or DTV capture card can receive, and watch the video from a HV-100 via the standard coaxial cable or antenna.

Key specs: 50~950 MHz / 1200~1350 MHz · DVB-T 1~8 MHz / ISDB-T 6 MHz · DVB-T EN 300-744, ISDB-T ARIB STD-B31, ISDB-Tb ABNT NBR 15601

Features:
- **Low Cost HD Video Distribution** — Compliant to existing HD TV sets, no extra adapter required, and no restriction on the number of receivers. All the peripherals like splitter, amplifier, connector...etc are the same as those for regular TV.
- **Flexible Bandwidth Option** — In DVB-T mode, 1MHz~8MHz Bandwidth options are supported.
- **UART Digital Data Mux** — HV-100 supports UART data mux feature. GPS or aviation data can be multiplexed in the transmitted stream from HV-100's UART port. Besides audio and video, the receiver can decode the received UART data for further data processing. The communication parameters for the data mux UART port are configurable.
- **Video Streaming and Web Management** — HV-100 supports network video streaming input/output and Web interface for remote management.
- **Versatile video inputs and formats** — Support HDMI/DVI and composite (CVBS) video input. Besides H.264/MPEG2 HD, MPEG2 SD format is also supported and compliant to existing SD TV sets or STB's.
- **Easy to Configure** — Channel number can be configured with the built-in keypad switch easily. More advanced configurations can be set from an external host like PC/NB or Tablet/Pad thru USB interface. Remote Web management is also supported.
- **Robust, Reliable and Long Distance** — Easily transmit 1080p video over a single 3C2V/RG59 cable for at least 500 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 30 dBm with an external PA. The real distance depends on the antenna design and receiver quality. Differential RF output is also available for RF signal distribution with twisted pairs (telephone or Ethernet RJ-45) instead of heavy coaxial cables.
- **Daisy-chain Connection (Bus-Topology)** — Multiple HV-100's with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- **Real time protocol and Low latency** — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency

- Input: Video: CVBS, HDMI 1.3 (with HDMI loop-thru); Audio: Stereo line-in or HDMI PCM audio-in (HDMI PCM audio-in supports up to stereo 96KHz, 24bits)
- Compression: Video: H.264 or MPEG2; Audio: AAC or MPEG
- Resolution — Input (CVBS): 720x480x30I (NTSC, D1); 720x576x25I (PAL, D1)
- Resolution — Input (HDMI): 720x480x30I (NTSC, D1); 720x576x25I (PAL, D1); 1280x720x24P; 1280x720x50I/1280x720x50P; 1280x720x60I/1280x720x60P; 1920x1080x24P; 1920x1080x50I/1920x1080x50P; 1920x1080x60I/1920x1080x60P
- Resolution — Output (H.264): 1920x1080x24P/1920x1080x25P; 1600x1080x24P/1600x1080x25P/1600x1080x30P; 1440x1080x24P/1440x1080x25P/1440x1080x30P; 1280x1080x24P/1280x1080x25P/1280x1080x30P; 1280x720x24P/1280x720x25P/1280x720x30P; 704x576x25P (PAL, D1); 704x480x30P (NTSC, D1); 352x576x25P (PAL, Half D1); 352x480x30P (NTSC, Half D1)
- Resolution — Output (MPEG2): 1280x1080x24P/1280x1080x25P/1280x1080x30P; 1280x720x24P/1280x720x25P/1280x720x30P; 704x576x25P (PAL, D1); 704x480x30P (NTSC, D1); 352x576x25P (PAL, Half D1); 352x480x30P (NTSC, Half D1)
- Power: DC 9~24V; Power Consumption 0.7A@12V
- Dimension WxDxH: 195mmx125mmx40mm
- Weight: 735g
- Operating Temperature: -10℃ ~ 60℃

- TV Standard: HV-100E: DVB-T EN-300 744; HV-100J: ISDB-T ARIB STD-B31 / ISDB-Tb ABNT NBR 15601
- RF connector: 75-Ω F-type connector and two-wire terminal for twisted pairs (differential RF output)
- Bandwidth: HV-100E: 1/2/3/4/5/6/7/8 MHz; HV-100J: 6MHz
- FFT: HV-100E: 2K, 8K; HV-100J: 2K, 4K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 50~950MHz, 1200~1350MHz step size 1KHz; DVB-T channels: VHF 6M BW/UHF 6M BW: Channel: CH7~CH83; VHF 7M BW/UHF 7M BW: Channel: CH5~CH69; VHF 8M BW/UHF 8M BW: Channel: CH5~CH69; ISDB-T channels: (STD-B21) UHF band: UHF 13ch~62ch; VHF band VHF 1ch~12 ch; MID band c13ch~c22 ch; SHB band c23ch~c63 ch
- Segment & Layer: HV-100E: n/a; HV-100J: 13 Seg or 1 Seg
- Time Interleaver: HV-100E: n/a; HV-100J: Not supported
- RF Output Level: 50-950 MHz -3 dBm (105 dBuV) typically (Differential output less by 6~7 dB); HV-100EH (HV-100E HAM TV version): 1200-1350 MHz -18~-20 dBm (88~90 dBuV) typically, without Differential output
- Digital Gain/Attenuator for Fine Tuning: range: +5dB~-10dB, Step size 1dB
- MER: 50~950MHz, 35 dB Typically; 1200~1350MHz, 25dB Typically (HV-100EH)
- Spectrum Shoulder (Adjacent channel): 45dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB

Note: Note: output formats supported depend on the video input formats. The frame rate should be consistent and the encoded video frame size should be less or equal to the original input.
Note: Specifications are subject to change without prior notice.
Note: There could be MER loss in high gain/attenuation level.

### 05 · DVB-T Full HD Receiver Box (3)

#### HV-110 — Full HD Digital HAM TV Receiver

Page: https://hides.com.tw/en/ham/catalog/hv-110/ · https://hides.com.tw/ham/catalog/hv-110/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_HV110_eng.html (archive, noindex)

DVB-T to HDMI/CVBS

HV-110 is a 1080 Full HD receiver box which receives and decodes DVB-T (ETSI EN 300 744) HD/SD terrestrial broadcast signals. It features the video output of HDMI and Composite (CVBS) for DVB-T. Specifically, besides regular 5/6/7/8 MHz bandwidth of standard DVB-T signal, HV-110 also supports 2/3/4 MHz bandwidth for HAM TV applications.

Key specs: 170~950 MHz · 2/3/4 or 5/6/7/8 MHz, selected by switch · DVB-T ETSI EN 300 744

Features:
- Standalone Digital DVB-T receiver
- Support 1080 Full HD H.264 and MPEG2 decoding
- SMA Antenna in
- Composite video output / Stereo Analog (L/R) output
- Digital HDMI audio and video output
- On-Screen Display Menu
- Automatic or manual channel scan
- 2/3/4/5/6/7/8 MHz Bandwidth support

- Frequency: 170~950 MHz
- Bandwidth: 2/3/4 or 5/6/7/8 MHz, selected by switch
- Demodulation: COFDM
- FFT mode: 2K, 4K, 8K
- Constellation: QPSK, 16QAM, 64QAM
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Inner coding rate: 1/2, 2/3, 3/4, 5/6, 7/8

- Formats: MPEG-2 MP@ML, MPEG-2 MP@HL, MPEG4 AVC/H.264 MP@L4.1, MPEG4 AVC/H.264 HP@L4.1
- Output: Digital HD video, CVBS
- Aspect ratio: 4:3 and 16:9 (Letter Box, Pan & Scan)

- Decode: MPEG-1 layer I/II, MP3, MPEG-2 layer II, MPEG-2 AAC, MPEG-4 HE-AAC
- Sampling rate: 32KHz, 44.1KHz, 48KHz
- Output: Stereo line-out and HDMI digital output

- IR remote: 
- 7-segment LED display: Status: 
- LED: Power and Channel lock status: 

- Power-in (DC Jack or Micro-USB): 
- SMA RF-in: 
- CVBS/Audio-L/Audio-R Jack: 
- Digital HD video: 
- Bandwidth switch (2/3/4 MHz or 5/6/7/8 MHz): 

- Power supply: 5VDC, 2A. Consumption (Max.) 10 Watt
- Dimension: W(105 mm) x D(75 mm) x H(35 mm)

Note: Specifications are subject to change without prior notice.

#### HV-120 — Full HD 1.2GHz/2.4GHz band Digital TV Receiver

Page: https://hides.com.tw/en/ham/catalog/hv-120/ · https://hides.com.tw/ham/catalog/hv-120/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_HV120_eng.html (archive, noindex)

For HAM and FPV

HV-120 is a 1080 Full HD receiver box which receives and decodes DVB-T (ETSI EN 300 744) HD/SD terrestrial broadcast signals. It features the video output of HDMI and Composite (CVBS) for DVB-T. In addition to the standard TV band (100~950MHz), HV-120-1.2G can tune the 1.2GHz band while HV-120-2.4G can tune the 2.4GHz band.

Key specs: 100~950 MHz and 1150~2650 MHz · 2/2.5/3/4/5/6/7/8 MHz · DVB-T ETSI EN 300 744

Features:
- Standalone Digital DVB-T receiver
- Support 1080 Full HD H.264 and MPEG2 decoding
- **Frequency Band Support** — Standard TV VHF and UHF band (100~950MHz) · 1.2GHz band or 2.4GHz band reception
- **Two Antenna SMA connectors** — One for TV VHF and UHF band (<1GHz) · One for >1GHz band reception
- Composite video output / Stereo Analog (L/R) output
- Digital HDMI audio and video output
- On-Screen Display Menu
- Automatic or manual channel scan
- 2/2.5/3/4/5/6/7/8 MHz Bandwidth support
- 12V active antenna supported (up to 150mA)
- **Band and bandwidth options** — Besides 1.2G and 2.4G, other band support is available on request. Various channel bandwidth receptions are supported, including 2, 2.5, 3, 4, 5, 6, 7, and 8 MHz.

- Frequency: 100~950 MHz and 1150~2650MHz
- Bandwidth: 2/2.5/3/4/5/6/7/8 MHz
- Demodulation: COFDM (ETSI EN 300 744 DVB-T)
- FFT mode: 2K, 4K, 8K
- Constellation: QPSK, 16QAM, 64QAM
- Guard interval: 1/4, 1/8. 1/16, 1/32
- Inner coding rate: 1/2, 2/3, 3/4, 5/6, 7/8

- Formats: MPEG-2 MP@ML, MPEG-2 MP@HL, MPEG4 AVC/H.264 MP@L4.1, MPEG4 AVC/H.264 HP@L4.1
- Output: Digital HD video, CVBS
- Aspect ratio: 4:3 and 16:9 (Letter Box, Pan & Scan)

- Decode: MPEG-1 layer I/II, MP3, MPEG-2 layer II, MPEG-2 AAC, MPEG-4 HE-AAC
- Sampling rate: 32KHz, 44.1KHz, 48KHz
- Output: Stereo line-out and HDMI digital output

- IR remote: 
- 7-segment LED display: Status: 
- LED: Power and Channel lock status: 

- Power-in (DC Jack or Micro-USB): 
- Two SMA RF-in: 
- CVBS/Audio-L/Audio-R Jack: 
- Digital HD video: 
- Bandwidth switch (2/2.5/3/4/5/6/7/8 MHz): 

- Power Supply: 12 VDC, Typical Consumption 5.4 Watt (450mA)
- Dimension: W(105 mm) x D(75 mm) x H(35 mm) (Bare bone PCBA size: 100mm x 70mm)
- Weight: 175g (Bare bone PCBA weight 55g)

Note: There is a saw filter in the RF front end. The saw filter limits the reception range but minimize ACI (adjacent channel interference).
Note: When the saw filter removed, full band range is supported but poorer ACI.
Note: Specifications are subject to change without prior notice.

#### HV-122 — Full HD 2-Way Diversity Digital TV Receiver

Page: https://hides.com.tw/en/ham/catalog/hv-122/ · https://hides.com.tw/ham/catalog/hv-122/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_HV120DCA_eng.html (archive, noindex)

TV/1.2GHz/2.4GHz bands support — For HAM and FPV

HV-122 is a 1080 Full HD diversity receiver box which receives and decodes DVB-T (ETSI EN 300 744) HD/SD terrestrial broadcast signals, with HDMI and Composite (CVBS) video output. It is designed with 2-way diversity antenna reception, which can enhance high mobility support and mitigate multi-path effect.

Key specs: 170~862 MHz (HV-122) · 1/1.5/2/2.5/3/4/5/6/7/8 MHz · DVB-T ETSI EN 300 744

Features:
- Standalone Digital DVB-T receiver
- Support 1080 Full HD H.264 and MPEG2 decoding
- **Frequency Band Support** — HV-122-TV 170~860MHz · HV-122-2.4G 2100~2550MHz · HV-122-A 170~2700MHz (sensitivity is ~20dB less at 170~700MHz)
- Two Antenna SMA connectors
- Composite video output / Stereo Analog (L/R) output
- Digital HDMI audio and video output
- On-Screen Display Menu
- Automatic or manual channel scan
- 1/1.5/2/2.5/3/4/5/6/7/8 MHz Bandwidth support
- 12V active antenna supported (up to 500mA)
- Demultiplex UART data in received TS transmitted by HiDes transmitter.
- Decrypt encrypted TS data transmitted by HiDes transmitter.
- **UART control interface for external host** — Besides the remote controller, HV-122 can be configured and controlled thru its UART port by an external host. HV-122 can also decode the mux'ed UART data in received streams and output it thru its local UART port.
- **Channel bandwidth** — Besides standard TV channel bandwidth (5/6/7/8MHz), HV-122 can tune 1/1.5/2/2.5/3/4 MHz bandwidth channels.
- **Band options** — Depending on the model options, HV-122 supports standard TV-band (170-860MHz), 2.4G-band (2100~2550MHz), or All-band (170~2700MHz).

- Frequency: HV-122: 170~862 MHz; HV-122-2.4G: 2100~2550MHz*; HV-122-A: 170~2700MHz**
- Bandwidth — Single Antenna: 1/1.5/2/2.5/3/4/5/6/7/8 MHz
- Bandwidth — Diversity Antenna: 2.5/3/4/5/6/7/8 MHz
- Demodulation: COFDM (ETSI EN 300 744 DVB-T)
- FFT mode: 2K, 4K, 8K
- Constellation: QPSK, 16QAM, 64QAM
- Guard interval: 1/4, 1/8. 1/16, 1/32
- Inner coding rate: 1/2, 2/3, 3/4, 5/6, 7/8

- Pmax: >+5 dBm
- Pmin (FFT:2K, 16QAM, CR:2/3, GI:1/8) — 1 MHz: <-99 dBm
- Pmin (FFT:2K, 16QAM, CR:2/3, GI:1/8) — 1.5 MHz: <-98 dBm
- Pmin (FFT:2K, 16QAM, CR:2/3, GI:1/8) — 2 MHz: <-96 dBm
- Pmin (FFT:2K, 16QAM, CR:2/3, GI:1/8) — 2.5 MHz: <-95 dBm
- Pmin (FFT:2K, 16QAM, CR:2/3, GI:1/8) — 3 MHz: <-95 dBm
- Pmin (FFT:2K, 16QAM, CR:2/3, GI:1/8) — 4 MHz: <-94 dBm
- Pmin (FFT:2K, 16QAM, CR:2/3, GI:1/8) — 5 MHz: <-92 dBm
- Pmin (FFT:2K, 16QAM, CR:2/3, GI:1/8) — 6 MHz: <-91 dBm
- Pmin (FFT:2K, 16QAM, CR:2/3, GI:1/8) — 7 MHz: <-90 dBm
- Pmin (FFT:2K, 16QAM, CR:2/3, GI:1/8) — 8 MHz: <-90 dBm

- Formats: MPEG-2 MP@ML, MPEG-2 MP@HL, MPEG4 AVC/H.264 MP@L4.1, MPEG4 AVC/H.264 HP@L4.1
- Output: Digital HD video, CVBS
- Aspect ratio: 4:3 and 16:9 (Letter Box, Pan & Scan)

- Decode: MPEG-1 layer I/II, MP3, MPEG-2 layer II, MPEG-2 AAC, MPEG-4 HE-AAC
- Sampling rate: 32KHz, 44.1KHz, 48KHz
- Output: Stereo line-out and HDMI digital output

- IR remote: 
- 7-segment LED display: Status: 
- LED: Power and Channel lock status: 

- Power-in (DC Jack or Micro-USB): 
- Two SMA RF-in: 
- CVBS/Audio-L/Audio-R Jack: 
- Digital HD video: 

- Power Supply — HV-122-TV: 12 VDC, Typical Consumption 5.4 Watt (450mA)
- Power Supply — HV-122-2.4G / HV-122-A: 12 VDC, Typical Consumption 6.48 Watt (540mA)
- Dimension: W(105 mm) x D(75 mm) x H(35 mm) (Bare bone PCBA size: 100mm x 70mm)
- Weight: 185g (Bare bone PCBA weight 65g)

Note: There is a saw filter in the RF front end. The saw filter limits the reception range but minimize ACI (adjacent channel interference).
Note: When the saw filter removed, full band range is supported but poorer ACI. The sensitivity is ~20dB less at 170~700MHz.
Note: Specifications are subject to change without prior notice.

### 06 · DTV Camera Series (4)

#### DC-099 — FPV/UAV DTV CAM Module

Page: https://hides.com.tw/en/ham/catalog/dc-099/ · https://hides.com.tw/ham/catalog/dc-099/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_dc099_eng.html (archive, noindex)

DTV CAM is an all-new camera which outputs the captured HD video in digital TV signal. The core technology is based on open industrial standard EN 300-744 DVB-T, which can transmit compressed high-definition digital video over cable or air. All DVB-T compliant receivers, including SetTopBox, Digital TV, PC/NB USB DTV dongle, or DTV capture card can receive, watch and record the video from a DTV CAM without requiring any special adapter on each receiver nor deploying new cables, but using the existing standard antenna coaxial cable.

Key specs: 70–950 MHz (DC-099H: +1200–1350 MHz) · 1/2/3/4/5/6/7/8 MHz bandwidth · H.264 1920x1080x30P over DVB-T

Features:
- **Painless upgrade to full HD** — Reuse existing coaxial cable deployment without any special requirement for cable & connector. DVB-T signal is so robust that even a degraded and aged cable can be used to convey full HD signal perfectly.
- **Easy and friendly user experience** — There is no lousy network IP configuration and no need to use a desktop or notebook PC. It's just as easy as watching TV programs with a TV set or SetTopBox.
- **Long Distance** — Easily transmit 1080p video over a single 5C2V/RG62 cable for at least 1000 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 30 dBm with an external PA (optional). The real distance depends on the antenna design and receiver quality.
- **Daisy-Chain Connection (Bus-Topology)** — Multiple DTV CAM's with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- **Mux multiple video streams** — Support multiple video streams at the same time, for example 1080P/720P, D1, CIF, and JPG…
- **Real time protocol and Low latency** — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency.
- **Standard 42mmx42mm form factor design** — Compatible to standard bullet housings. Housing option available from HiDes.
- **PC configuration tool** — A bundled PC/Laptop USB UART dongle kit and Windows configuration tool are available. Users may configure the channel frequency (range 70~950MHz, in 1 KHz step) and bandwidth (range 1~8 MHz, in 1 MHz step) as they need.

- Image Sensor: 1/2.5” CMOS Sensor
- Resolution: 2 Megapixel 1920 x 1080
- Default Video Streams: HD/SD Dual Streams: a. 1080P/24FPS x 1 b. 480P or 576P/24FPS x 1
- Video Compression: H.264 up to 1920x1080x30P
- Video Transmission Protocol: DVB-T
- Shutter Control: AUTO, 1/60 ~ 1/15000
- Auto Gain Control: AUTO
- White Balance: AUTO
- Back Light Compensation: AUTO
- Day & Night: AUTO
- Scanning System: Progressive
- S/N Ratio: 44dB
- Lens: Board Mount 3.5 mm-10mm
- Audio: Mono 16 KHz AAC audio
- Power Supply: DC 12V/AC 24V
- Power Consumption: DC-099: 0.35A@12V; DC-099H: 0.35A@12V; DC-099-PA900: 0.7A@12V; DC-099H-PA1200: 0.7A@12V
- Dimension: 30mm x 42mm x 42mm (LxWxH, excluding lens and power adaptor)
- Weight: DC-099/DC-099H: 66g; DC-099-PA-900: 91g (w/ PA and antenna)
- Operating Temperature: -25° C (-13° F) to 50° C (122° F)

- RF connector: On-board: 1.0/2.3 DIN female 50-Ω; External cable: BNC-type 50-Ω connector
- Bandwidth: 1/2/3/4/5/6/7/8 MHz
- Constellation: QPSK and 16QAM
- FFT: 2K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32 (In 16QAM mode, only Guard Interval 1/4 and 1/8 are supported)
- Frequency range: DC-099: 70 .. 950MHz; DC-099H: 70 .. 950MHz/1200~1350MHz. Channel setting by Rotary switch (0~F) or Return Channel Configuration
- RF Output Level: DC-099: 70~950 MHz 0 dBm (108 dBuV); DC-099H: 70~950 MHz 0 dBm (108 dBuV), 1200-1350 MHz -5 dBm (103 dBuV); DC-099-PA900: 850~950 MHz 20 dBm (128 dBuV); DC-099H-PA1200: 1200~1350 MHz 14 dBm (122 dBuV)
- Digital Attenuator: Range: +6/-25dB, Step size 1dB
- MER: >30dB Typically
- Spectrum Shoulder (Adjacent channel): 45dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB

- 0: 142.4 MHz (7 MHz BW)
- 1: 156.5 MHz (7 MHz BW)
- 2: 177.5 MHz (7 MHz BW)
- 3: 191.5 MHz (7 MHz BW)
- 4: 205.5 MHz (7 MHz BW)
- 5: 291.5 MHz (7 MHz BW)
- 6: 474 MHz (8 MHz BW)
- 7: 490 MHz (8 MHz BW)
- 8: 506 MHz (8 MHz BW)
- 9: 522 MHz (8 MHz BW)
- A: 538 MHz (8 MHz BW)
- B: 554 MHz (8 MHz BW)
- C: 570 MHz (8 MHz BW)
- D: 586 MHz (8 MHz BW)
- E: 602 MHz (8 MHz BW)
- F: 618 MHz (8 MHz BW)

- 0: 905 MHz (6 MHz BW)
- 1: 911 MHz (6 MHz BW)
- 2: 917 MHz (6 MHz BW)
- 3: 923 MHz (6 MHz BW)
- 4: 935 MHz (6 MHz BW)
- 5: 947 MHz (6 MHz BW)
- 6: 797 MHz (6 MHz BW)
- 7: 803 MHz (6 MHz BW)
- 8: 815 MHz (6 MHz BW)
- 9: 827 MHz (6 MHz BW)
- A: 839 MHz (6 MHz BW)
- B: 851 MHz (6 MHz BW)
- C: 863 MHz (6 MHz BW)
- D: 875 MHz (6 MHz BW)
- E: 887 MHz (6 MHz BW)
- F: 899 MHz (6 MHz BW)

- 0: 1200 MHz (6 MHz BW)
- 1: 1210 MHz (6 MHz BW)
- 2: 1220 MHz (6 MHz BW)
- 3: 1230 MHz (6 MHz BW)
- 4: 1240 MHz (6 MHz BW)
- 5: 1250 MHz (6 MHz BW)
- 6: 1260 MHz (6 MHz BW)
- 7: 1270 MHz (6 MHz BW)
- 8: 1280 MHz (6 MHz BW)
- 9: 1290 MHz (6 MHz BW)
- A: 1300 MHz (6 MHz BW)
- B: 1310 MHz (6 MHz BW)
- C: 1220 MHz (6 MHz BW)
- D: 1330 MHz (6 MHz BW)
- E: 1340 MHz (6 MHz BW)
- F: 1350 MHz (6 MHz BW)

Note: DC-099 supports 70~950MHz bands.
Note: DC-099H supports 70~950MHz and 1.2G bands.
Note: Specifications are subject to change without prior notice.
Note: There could be MER loss/BER increment in high gain/attenuation level.

#### DC-101 V2 — 720P HD DTV CAM

Page: https://hides.com.tw/en/ham/catalog/dc-101/ · https://hides.com.tw/ham/catalog/dc-101/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_dc101_eng.html (archive, noindex)

The DC-101 V2 is a 720P HD DTV CAM that outputs its captured video as a DVB-T digital TV signal, so any DVB-T compliant receiver can watch it over existing coaxial cable or over the air. It encodes H.264 1280x720x30 (or D1 PAL/NTSC) video with AAC mono audio and transmits across 50~950MHz and 1200~1350MHz.

Key specs: 50–950 MHz / 1200–1350 MHz · 2/3/4/5/6/7/8 MHz bandwidth · H.264 1280x720x30 over DVB-T

Features:
- **Painless upgrade to HD** — Reuse existing coaxial cable deployment without any special requirement for cable & connector. DVB-T signal is so robust that even a degraded and aged cable can be used to convey HD signal perfectly.
- **Easy and friendly user experience** — There is no lousy network IP configuration and no need to use a desktop or notebook PC. It's just as easy as watching TV programs with a TV set or SetTopBox.
- **Long Distance** — Easily transmit HD video over a single 3C2V/RG59 cable for at least 500 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 20 dBm. The real distance depends on the antenna design and receiver quality.
- **Daisy-Chain Connection (Bus-Topology)** — Multiple DTV CAM's with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- **Real time protocol and Low latency** — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency.

- Image Sensor: OV9712, 1/4” 1.3M CMOS MegaPixel
- Effective Number of Pixels: 1280(H) * 800(V)
- Video Compression: Configurable: H.264 1280x720x30, or H.264 720x576x25 (PAL), or H.264 720x480x30 (NTSC)
- Audio Compression: AAC mono @16KHz sampling rate
- Video Transmission Protocol: DVB-T
- Auto Gain Control: AUTO
- White Balance: AUTO
- Back Light Compensation: AUTO
- Day & Night: AUTO
- Scanning System: Progressive
- S/N Ratio: 39dB
- Power Supply: DC 5V
- Power Consumption: < 2.5W
- Dimension: 50mm x 50mm x 20mm (box body only, excluding the holder)
- Weight: 50g (box body only, excluding the holder)
- Operating Temperature: -10℃ ~ 60℃

- RF connector: 75-Ω BNC connectors
- Bandwidth: 2/3/45/6/7/8 MHz
- Constellation: QPSK and 16QAM (In 16QAM mode, only Guard Interval 1/4 supported)
- FFT: 2K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 50~950MHz, 1200~1350MHz step size 1KHz. All valid TV channels are fully supported — VHF 6M BW/UHF 6M BW: CH7~CH83; VHF 7M BW/UHF 7M BW: CH5~CH69; VHF 8M BW/UHF 8M BW: CH5~CH69
- RF Output Level: 50~950 MHz: +0 dBm (108 dBuV) Typically; 1200~1350MHz: -20 dBm (88 dBuV) Typically
- Digital Attenuator: Range: +6/-25dB, Step size 1dB
- MER: 50~950MHz: 30~35 dB Typically; 1200~1350MHz: 25~30dB Typically
- Spectrum Shoulder (Adjacent channel): 45dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB

Note: Specifications are subject to change without prior notice.
Note: There could be MER loss in high gain/attenuation level.
Note: All the above configurable settings can also be set or configured by a micro SD card.
Note: 15 preset channels can be easily selected by a rotary switch.

#### DC-103 — FPV 1080P Full HD DTV CAM

Page: https://hides.com.tw/en/ham/catalog/dc-103/ · https://hides.com.tw/ham/catalog/dc-103/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_DC103_eng.html (archive, noindex)

Support 70~450MHz and 850~950MHz bands (optional 1.2G band)

DTV CAM is an all-new camera which outputs the captured HD video in digital TV signal. The core technology is based on open industrial standard EN 300-744 DVB-T, which can transmit compressed high-definition digital video over cable or air. All DVB-T compliant receivers, including SetTopBox, Digital TV, PC/NB USB DTV dongle, or DTV capture card can receive, watch and record the video from a DTV CAM without requiring any special adapter on each receiver nor deploying new cables, but using the existing standard antenna coaxial cable.

Key specs: 70–450 MHz, 850–950 MHz · 1/2/3/4/5/6/7/8 MHz bandwidth · H.264 1920x1080x30P over DVB-T

Features:
- **Painless upgrade to full HD** — Reuse existing coaxial cable deployment without any special requirement for cable & connector. DVB-T signal is so robust that even a degraded and aged cable can be used to convey full HD signal perfectly.
- **Easy and friendly user experience** — There is no lousy network IP configuration and no need to use a desktop or notebook PC. It's just as easy as watching TV programs with a TV set or SetTopBox.
- **Long Distance** — Easily transmit 1080p/720p video over a single 5C2V/RG62 cable for at least 1000 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 30 dBm with an external PA. The real distance depends on the antenna design and receiver quality.
- **Daisy-Chain Connection (Bus-Topology)** — Multiple DTV CAM's with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- **Mux multiple video streams** — Support multiple video streams at the same time, for example 1080P/720P, D1, CIF, and JPG…
- **Real time protocol and Low latency** — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency.
- **Standard 38mmx38mm form factor design** — Compatible to standard bullet housings.

- Image Sensor: 1/2.8" SONY Exmor CMOS 2 Megapixels Progressive image Sensor
- Resolution: 2 Megapixel 1920 x 1080
- Default Video Streams: 1920x1080x30P
- Video Compression: H.264 up to 1920x1080x30P
- Video Transmission Protocol: DVB-T EN-300 744
- Shutter Control: 1/25 to 1/10,000 second，1/30 to 1/10,000 second
- Auto Gain Control: AUTO
- White Balance: AUTO
- Back Light Compensation: AUTO
- Day & Night: AUTO
- Scanning System: Progressive
- S/N Ratio: 44dB
- Lens: Board Mount 6 mm
- Audio — Input: DC-103BB: Condenser microphone; DC-103: 3.5 Phone Jack
- Audio — Compression: AAC (Optional)
- Power Supply: DC 12V+/-10%
- Power Consumption: DC-103: 280mA@12V
- Dimension: 49mm x 38mm x 38mm (LxWxH, excluding lens and power adaptor)
- Weight: DC-103BB (bare bone only w/o housing): 50g
- Operating Temperature: 0° C to 40° C

- RF connector: On-board: 1.0/2.3 DIN female 50-Ω; External cable: SMA-type 50-Ω connector
- Bandwidth: 1/2/3/4/5/6/7/8 MHz
- Constellation: QPSK and 16QAM
- FFT: 2K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32 (In 16QAM mode, only Guard Interval 1/4 and 1/8 are supported)
- Frequency range: Channel setting by UART Channel Configuration. DC-103: 70-450MHz, 850-950MHz; DC-103H: 70-450MHz, 850-950MHz, 1.2G
- RF Output Level: 0 dBm @177MHz; -3.5 dBm @430MHz; -14 dBm @915MHz
- Digital Amplifier/Attenuator: Range: +6/-25dB, Step size 1dB
- MER: 25 dB @177MHz; 28 dB @430MHz; 25 dB @915MHz
- Spectrum Shoulder (Adjacent channel): 45dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB

Note: DC-103 supports 70~450MHz and 850~950MHz bands.
Note: DC-103H supports 70~450MHz, 850~950MHz, and 1.2G bands.
Note: Specifications are subject to change without prior notice.
Note: There could be MER loss in high gain/attenuation level.
Note: All the above configurable settings can also be set by PC tool kit with return channel card (optional).
Note: Special edition available for 1.2G (1200~1350MHz) band support.

#### DC-105 — FPV 1080P Full HD DTV CAM

Page: https://hides.com.tw/en/ham/catalog/dc-105/ · https://hides.com.tw/ham/catalog/dc-105/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_DC105_eng.html (archive, noindex)

Support 70~1450MHz band

DTV CAM is an all-new camera which outputs the captured HD video in digital TV signal. The core technology is based on open industrial standard EN 300-744 DVB-T / ARIB STD-B31 ISDB-T / ABNT NBR 15601 ISDB-Tb, which can transmit compressed high-definition digital video over cable or air. All DVB-T/ISDB-T/ISDB-Tb compliant receivers, including SetTopBox, Digital TV, PC/NB USB DTV dongle, or DTV capture card can receive, watch and record the video from a DTV CAM without requiring any special adapter on each receiver nor deploying new cables, but using the existing standard antenna coaxial cable.

Key specs: 70–1450 MHz · 1/2/3/4/5/6/7/8 MHz bandwidth · H.264 1920x1080x30P over DVB-T/ISDB-T

Features:
- **UART Digital Data Mux** — DC-105 supports UART data mux feature. GPS or aviation data can be multiplexed in the transmitted stream from DC-105's UART port. Besides audio and video, the receiver can decode the received UART data for further data processing. The communication parameters for the data mux UART port are configurable.
- **Security for anti-eavesdropping** — Support both RF layer and TS data layer encryption.
- **Painless upgrade to full HD** — Reuse existing coaxial cable deployment without any special requirement for cable & connector. DVB-T signal is so robust that even a degraded and aged cable can be used to convey full HD signal perfectly.
- **Easy and friendly user experience** — There is no lousy network IP configuration and no need to use a desktop or notebook PC. It's just as easy as watching TV programs with a TV set or SetTopBox.
- **Long Distance** — Easily transmit 1080p/720p video over a single 5C2V/RG62 cable for at least 1000 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 30 dBm with an external PA. The real distance depends on the antenna design and receiver quality.
- **Daisy-Chain Connection (Bus-Topology)** — Multiple DTV CAM's with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- **Mux multiple video streams** — Support multiple video streams at the same time, for example 1080P/720P, D1, CIF, and JPG…
- **Real time protocol and Low latency** — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency.
- **Standard 38mmx38mm form factor design** — Compatible to standard bullet housings.

- Image Sensor: 1/2.8" SONY Exmor CMOS 2 Megapixels Progressive image Sensor
- Resolution: 2 Megapixel 1920 x 1080
- Default Video Streams: 1920x1080x30P
- Video Compression: H.264 up to 1920x1080x30P
- Video Transmission Protocol: DVB-T EN-300 744
- Shutter Control: 1/25 to 1/10,000 second，1/30 to 1/10,000 second
- Auto Gain Control: AUTO
- White Balance: AUTO
- Back Light Compensation: AUTO
- Day & Night: AUTO
- Scanning System: Progressive
- S/N Ratio: 44dB
- Lens: Board Mount 6 mm
- Audio — Input: DC-105BB: Condenser microphone; DC-105: 3.5 Phone Jack
- Audio — Compression: AAC
- Power Supply: DC 12V+/-10%
- Power Consumption: DC-105: 290mA@12V
- Dimension: Sensor b/d: 38mm x 38mm; Main b/d: 38mm x 38mm
- Weight: DC-105BB (bare bone only w/o housing and copper pillars): ~20g
- Operating Temperature: 0° C to 40° C

- RF connector: On-board: 1.0/2.3 DIN female 50-Ω; External cable: SMA-type 50-Ω connector
- Bandwidth: 1/2/3/4/5/6/7/8 MHz
- Constellation: QPSK and 16QAM
- FFT: 2K, 8K
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: Channel setting by UART Channel Configuration. DC-105: 70-1450MHz
- RF Output Level (Max): 0 dBm @177MHz; -2 dBm @430MHz; -15 dBm @950MHz; -24 dBm @1250MHz
- Digital Amplifier/Attenuator: Range: +6/-25dB, Step size 1dB
- MER: 26~35dB, typically
- Spectrum Shoulder (Adjacent channel): 45dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB

Note: DC-105 supports only H.264 video encoding, so the receiver should be able to decode H.264 stream while old DVB-T/ISDB-T TV's may not.
Note: Specifications are subject to change without prior notice.
Note: There could be MER loss/BER increment in high gain/attenuation level.
Note: All the above configurable settings can also be set by PC tool kit thru UART (COM) port.

### 07 · DTV Gap Filler / Repeater (5)

#### BR-100E — DVB-T Digital Gap Filler/Repeater

Page: https://hides.com.tw/en/ham/catalog/br-100e/ · https://hides.com.tw/ham/catalog/br-100e/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_BR100e_eng.html (archive, noindex)

Hardware demodulate-and-remodulate TV signal repeater

BR-100 is a hardware digital TV gap filler/repeater: the received TV RF signal is demodulated to a transport stream and re-modulated to a new TV RF signal entirely in hardware, without any MER loss or added noise. With built-in 31-way PID filters and PCR re-stamp, infinite digital TV signal extension can be achieved with BR-100.

Key specs: DVB-T (EN 300-744) · Tx 50–950 MHz and 1200–1350 MHz · Bandwidth 2/3/4/5/6/7/8 MHz

Features:
- **Features** — Hardware modulator and demodulator support EN 300-744 DVB-T /ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb reception and retransmission. TV RF signal is demodulated to a transport stream (TS), and then modulated to a new TV RF signal with fully hardware digital processing without any MER loss or any noise addition. Built-in 31-way PID filters and PCR re-stamp.
- BR-100E supports EN 300-744 DVB-T while BR-100J supports ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb.
- BR-100EH is a special edition of BR-100E for HAM TV application; BR-100EH can support up to 1.2G band with high RF power (-18dBm), but 2'nd and 3'rd harmonic in 950MH~1350MHz band is not well filtered.
- **Demodulator (Receiver)** — BR-100E supports Digital Terrestrial DVB-T Receptions (5/6/7/8 MHz bandwidth) and amateur HAM DVB-T TV reception (2/3/4 MHz bandwidth). BR-100J supports Digital Terrestrial ISDB-T/ISDB-Tb Receptions (6/7 MHz bandwidth).
- **Modulator (Transmitter)** — Direct digital conversion to 50~950MHz and 1200~1350 MHz for excellent signal quality.
- BR-100E supports configurable bandwidth from 2MHz to 8 MHz. BR-100J supports configurable bandwidth 6/7/8 MHz.
- **Channel Adaptation** — The input and out channels are totally independent. The new (Tx) channel's frequency, bandwidth, code rate, guard interval, FFT, constellation can be totally different from the original (Rx) one's. If the input channel data rate is less than the output, auto null-packet insertion will be done in the modulator. If the input channel data rate is larger, setting PID filter properly to filter out unwanted packets may avoid data overflow. PCR re-stamp mechanism is supported to keep the correctness of PCR when PID's filtered or null packets inserted.
- **Applications** — DVB-T/ISDB-T digital TV signal repeater/extender · DVB-T/ISDB-T closed circuit TV gap filler · Air to Cable/Cable to Air/Air to Air/Cable to Cable TV signal repeater

- RF connector: Tx: 75-Ω F (female) connector; Rx: 75-Ω IEC (female) connector
- Bandwidth — Transmitter: BR-100E (DVB-T): 2/3/4/5/6/7/8 MHz; BR-100J (ISDB-T/Tb): 6/7/8 MHz
- Bandwidth — Receiver: BR-100E (DVB-T): 2/3/4 MHz or 5/6/7/8 MHz *1; BR-100J (ISDB-T/Tb): 6/7 MHz
- FFT: 2K, 4K, 8K
- Constellation: 64QAM/16QAM/QPSK
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range — Transmitter: 50~950MHz and 1200~1350MHz, step size 1KHz
- Frequency range — Receiver: 50~950MHz, step size 1KHz
- RF Output Level: -4 dBm (104 dBuV) @ 50~950MHz; -45dBm @ 1.2G band *2
- Digital Attenuator: Range: +6/-25dB *3, Step size 1dB
- MER: >30dB Typically
- Spectrum Shoulder (Adjacent channel): 45dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB
- USB port: USB 2.0 or USB 1.1
- Power: 5V DC 390mA
- Dimensions (LxWxH): 100 x 130 x 35mm

Note: 1 : Bandwidth 2/3/4 MHz or 5/6/7/8 MHz are selected by a jumper.
Note: 2 : The U-band low pass filter is designed @950MHz, so 1.2G band power is filtered to such a low level.
Note: 3 : There could be MER loss in high gain/attenuation level.

#### BR-100EH — DVB-T Digital Gap Filler/Repeater

Page: https://hides.com.tw/en/ham/catalog/br-100eh/ · https://hides.com.tw/ham/catalog/br-100eh/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_BR100eh_eng.html (archive, noindex)

HAM TV edition of BR-100E with 1.2G band support

BR-100EH is a special edition of BR-100E for HAM TV application. It demodulates the received TV RF signal to a transport stream and re-modulates it to a new TV RF signal entirely in hardware, and it can support up to the 1.2G band with high RF power (-18dBm), though 2'nd and 3'rd harmonic in the 950MH~1350MHz band is not well filtered.

Key specs: DVB-T (EN 300-744) · 1.2G band @ -18 dBm · Bandwidth 2/3/4/5/6/7/8 MHz

Features:
- **Features** — Hardware modulator and demodulator support EN 300-744 DVB-T /ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb reception and retransmission. TV RF signal is demodulated to a transport stream (TS), and then modulated to a new TV RF signal with fully hardware digital processing without any MER loss or any noise addition. Built-in 31-way PID filters and PCR re-stamp.
- BR-100E supports EN 300-744 DVB-T while BR-100J supports ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb.
- BR-100EH is a special edition of BR-100E for HAM TV application; BR-100EH can support up to 1.2G band with high RF power (-18dBm), but 2'nd and 3'rd harmonic in 950MH~1350MHz band is not well filtered.
- **Demodulator (Receiver)** — BR-100E supports Digital Terrestrial DVB-T Receptions (5/6/7/8 MHz bandwidth) and amateur HAM DVB-T TV reception (2/3/4 MHz bandwidth). BR-100J supports Digital Terrestrial ISDB-T/ISDB-Tb Receptions (6/7 MHz bandwidth).
- **Modulator (Transmitter)** — Direct digital conversion to 50~950MHz and 1200~1350 MHz for excellent signal quality.
- BR-100E supports configurable bandwidth from 2MHz to 8 MHz. BR-100J supports configurable bandwidth 6/7/8 MHz.
- **Channel Adaptation** — The input and out channels are totally independent. The new (Tx) channel's frequency, bandwidth, code rate, guard interval, FFT, constellation can be totally different from the original (Rx) one's. If the input channel data rate is less than the output, auto null-packet insertion will be done in the modulator. If the input channel data rate is larger, setting PID filter properly to filter out unwanted packets may avoid data overflow. PCR re-stamp mechanism is supported to keep the correctness of PCR when PID's filtered or null packets inserted.
- **Applications** — DVB-T/ISDB-T digital TV signal repeater/extender · DVB-T/ISDB-T closed circuit TV gap filler · Air to Cable/Cable to Air/Air to Air/Cable to Cable TV signal repeater

- RF connector: Tx: 75-Ω F (female) connector; Rx: 75-Ω IEC (female) connector
- Bandwidth — Transmitter: BR-100E (DVB-T): 2/3/4/5/6/7/8 MHz; BR-100J (ISDB-T/Tb): 6/7/8 MHz
- Bandwidth — Receiver: BR-100E (DVB-T): 2/3/4 MHz or 5/6/7/8 MHz *1; BR-100J (ISDB-T/Tb): 6/7 MHz
- FFT: 2K, 4K, 8K
- Constellation: 64QAM/16QAM/QPSK
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range — Transmitter: 50~950MHz and 1200~1350MHz, step size 1KHz
- Frequency range — Receiver: 50~950MHz, step size 1KHz
- RF Output Level: -4 dBm (104 dBuV) @ 50~950MHz; -45dBm @ 1.2G band *2
- Digital Attenuator: Range: +6/-25dB *3, Step size 1dB
- MER: >30dB Typically
- Spectrum Shoulder (Adjacent channel): 45dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB
- USB port: USB 2.0 or USB 1.1
- Power: 5V DC 390mA
- Dimensions (LxWxH): 100 x 130 x 35mm

Note: 1 : Bandwidth 2/3/4 MHz or 5/6/7/8 MHz are selected by a jumper.
Note: 2 : The U-band low pass filter is designed @950MHz, so 1.2G band power is filtered to such a low level.
Note: 3 : There could be MER loss in high gain/attenuation level.

#### BR-100J — ISDB-T/ISDB-Tb Digital Gap Filler/Repeater

Page: https://hides.com.tw/en/ham/catalog/br-100j/ · https://hides.com.tw/ham/catalog/br-100j/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_BR100j_eng.html (archive, noindex)

Hardware demodulate-and-remodulate TV signal repeater

BR-100 is a hardware digital TV gap filler/repeater: the received TV RF signal is demodulated to a transport stream and re-modulated to a new TV RF signal entirely in hardware, without any MER loss or added noise. With built-in 31-way PID filters and PCR re-stamp, infinite digital TV signal extension can be achieved with BR-100.

Key specs: ISDB-T / ISDB-Tb (ARIB STD-B31 / ABNT NBR 15601) · Tx 50–950 MHz and 1200–1350 MHz · Bandwidth 6/7/8 MHz (Tx), 6/7 MHz (Rx)

Features:
- **Features** — Hardware modulator and demodulator support EN 300-744 DVB-T /ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb reception and retransmission. TV RF signal is demodulated to a transport stream (TS), and then modulated to a new TV RF signal with fully hardware digital processing without any MER loss or any noise addition. Built-in 31-way PID filters and PCR re-stamp.
- BR-100E supports EN 300-744 DVB-T while BR-100J supports ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb.
- BR-100EH is a special edition of BR-100E for HAM TV application; BR-100EH can support up to 1.2G band with high RF power (-18dBm), but 2'nd and 3'rd harmonic in 950MH~1350MHz band is not well filtered.
- **Demodulator (Receiver)** — BR-100E supports Digital Terrestrial DVB-T Receptions (5/6/7/8 MHz bandwidth) and amateur HAM DVB-T TV reception (2/3/4 MHz bandwidth). BR-100J supports Digital Terrestrial ISDB-T/ISDB-Tb Receptions (6/7 MHz bandwidth).
- **Modulator (Transmitter)** — Direct digital conversion to 50~950MHz and 1200~1350 MHz for excellent signal quality.
- BR-100E supports configurable bandwidth from 2MHz to 8 MHz. BR-100J supports configurable bandwidth 6/7/8 MHz.
- **Channel Adaptation** — The input and out channels are totally independent. The new (Tx) channel's frequency, bandwidth, code rate, guard interval, FFT, constellation can be totally different from the original (Rx) one's. If the input channel data rate is less than the output, auto null-packet insertion will be done in the modulator. If the input channel data rate is larger, setting PID filter properly to filter out unwanted packets may avoid data overflow. PCR re-stamp mechanism is supported to keep the correctness of PCR when PID's filtered or null packets inserted.
- **Applications** — DVB-T/ISDB-T digital TV signal repeater/extender · DVB-T/ISDB-T closed circuit TV gap filler · Air to Cable/Cable to Air/Air to Air/Cable to Cable TV signal repeater

- RF connector: Tx: 75-Ω F (female) connector; Rx: 75-Ω IEC (female) connector
- Bandwidth — Transmitter: BR-100E (DVB-T): 2/3/4/5/6/7/8 MHz; BR-100J (ISDB-T/Tb): 6/7/8 MHz
- Bandwidth — Receiver: BR-100E (DVB-T): 2/3/4 MHz or 5/6/7/8 MHz *1; BR-100J (ISDB-T/Tb): 6/7 MHz
- FFT: 2K, 4K, 8K
- Constellation: 64QAM/16QAM/QPSK
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range — Transmitter: 50~950MHz and 1200~1350MHz, step size 1KHz
- Frequency range — Receiver: 50~950MHz, step size 1KHz
- RF Output Level: -4 dBm (104 dBuV) @ 50~950MHz; -45dBm @ 1.2G band *2
- Digital Attenuator: Range: +6/-25dB *3, Step size 1dB
- MER: >30dB Typically
- Spectrum Shoulder (Adjacent channel): 45dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB
- USB port: USB 2.0 or USB 1.1
- Power: 5V DC 390mA
- Dimensions (LxWxH): 100 x 130 x 35mm

Note: 1 : Bandwidth 2/3/4 MHz or 5/6/7/8 MHz are selected by a jumper.
Note: 2 : The U-band low pass filter is designed @950MHz, so 1.2G band power is filtered to such a low level.
Note: 3 : There could be MER loss in high gain/attenuation level.

#### BR-101EH — DVB-T Digital Gap Filler/Repeater

Page: https://hides.com.tw/en/ham/catalog/br-101eh/ · https://hides.com.tw/ham/catalog/br-101eh/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_BR101eh_eng.html (archive, noindex)

HAM TV edition of BR-101E with 1.2G band support

BR-101EH is a special edition of BR-101E for HAM TV application. It demodulates the received TV RF signal to a transport stream and re-modulates it to a new TV RF signal entirely in hardware, and it can support up to the 1.2G band with high RF power (-18dBm), though 2'nd and 3'rd harmonic in the 950MH~1350MHz band is not well filtered.

Key specs: DVB-T (EN 300-744) · 1.2G band @ -18 dBm · Bandwidth 2/3/4/5/6/7/8 MHz

Features:
- **Features** — Hardware modulator and demodulator support EN 300-744 DVB-T /ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb reception and retransmission. TV RF signal is demodulated to a transport stream (TS), and then modulated to a new TV RF signal with fully hardware digital processing without any MER loss or any noise addition. Built-in 31-way PID filters and PCR re-stamp.
- BR-101E supports EN 300-744 DVB-T while BR-101J supports ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb.
- BR-101EH is a special edition of BR-101E for HAM TV application; BR-101EH can support up to 1.2G band with high RF power (-18dBm), but 2'nd and 3'rd harmonic in 950MH~1350MHz band is not well filtered.
- **Demodulator (Receiver)** — BR-101E supports Digital Terrestrial DVB-T Receptions (5/6/7/8 MHz bandwidth) and amateur HAM DVB-T TV reception (2/3/4 MHz bandwidth). BR-101J supports Digital Terrestrial ISDB-T/ISDB-Tb Receptions (6/7 MHz bandwidth).
- **Modulator (Transmitter)** — Direct digital conversion to 50~950MHz and 1200~1350 MHz for excellent signal quality.
- BR-101E supports configurable bandwidth from 2MHz to 8 MHz. BR-101J supports configurable bandwidth 6/7/8 MHz.
- **Channel Adaptation** — The input and out channels are totally independent. The new (Tx) channel's frequency, bandwidth, code rate, guard interval, FFT, constellation can be totally different from the original (Rx) one's. If the input channel data rate is less than the output, auto null-packet insertion will be done in the modulator. If the input channel data rate is larger, setting PID filter properly to filter out unwanted packets may avoid data overflow. PCR re-stamp mechanism is supported to keep the correctness of PCR when PID's filtered or null packets inserted.
- **Applications** — DVB-T/ISDB-T digital TV signal repeater/extender · DVB-T/ISDB-T closed circuit TV gap filler · Air to Cable/Cable to Air/Air to Air/Cable to Cable TV signal repeater

- RF connector: Tx: 75-Ω F (female) connector; Rx: 75-Ω IEC (female) connector
- Bandwidth — Transmitter: BR-101E (DVB-T): 2/3/4/5/6/7/8 MHz; BR-101J (ISDB-T/Tb): 6/7/8 MHz
- Bandwidth — Receiver: BR-101E (DVB-T): 2/3/4 MHz or 5/6/7/8 MHz *1; BR-101J (ISDB-T/Tb): 6/7 MHz
- FFT: 2K, 4K, 8K
- Constellation: 64QAM/16QAM/QPSK
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range — Transmitter: 50~950MHz and 1200~1350MHz, step size 1KHz
- Frequency range — Receiver: 50~950MHz, step size 1KHz
- RF Output Level: -4 dBm (104 dBuV) @ 50~950MHz; BR-101E/J: -45dBm @ 1.2G band *2; BR-101EH: -18dBm @ 1.2G band
- Digital Attenuator: Range: +6/-25dB *3, Step size 1dB
- MER: 28~33 dB Typically @50~950MHz; 25~30 dB Typically @1200~1350MHz
- Spectrum Shoulder (Adjacent channel): 45dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB
- USB port: USB 2.0 or USB 1.1
- Power: 5V DC 390mA
- Dimensions (LxWxH): 75 x 30 x 15mm (excluding power adaptor)

Note: 1 : Bandwidth 2/3/4 MHz or 5/6/7/8 MHz are selected by a jumper.
Note: 2 : BR-101E/J U-band low pass filter is designed @950MHz, so 1.2G band power is filtered to such a low level.
Note: 3 : There could be MER loss in high gain/attenuation level.

#### BR-101JH — DVB-T Digital Gap Filler/Repeater

Page: https://hides.com.tw/en/ham/catalog/br-101jh/ · https://hides.com.tw/ham/catalog/br-101jh/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_BR101jh_eng.html (archive, noindex)

HAM TV edition of BR-101 with 1.2G band support

BR-101JH is a special edition of BR-101E for HAM TV application. It demodulates the received TV RF signal to a transport stream and re-modulates it to a new TV RF signal entirely in hardware, and it can support up to the 1.2G band with high RF power (-18dBm), though 2'nd and 3'rd harmonic in the 950MH~1350MHz band is not well filtered.

Key specs: DVB-T (EN 300-744) · 1.2G band @ -18 dBm · Bandwidth 2/3/4/5/6/7/8 MHz

Features:
- **Features** — Hardware modulator and demodulator support EN 300-744 DVB-T /ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb reception and retransmission. TV RF signal is demodulated to a transport stream (TS), and then modulated to a new TV RF signal with fully hardware digital processing without any MER loss or any noise addition. Built-in 31-way PID filters and PCR re-stamp.
- BR-101E supports EN 300-744 DVB-T while BR-101J supports ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb.
- BR-101JH is a special edition of BR-101E for HAM TV application; BR-101JH can support up to 1.2G band with high RF power (-18dBm), but 2'nd and 3'rd harmonic in 950MH~1350MHz band is not well filtered.
- **Demodulator (Receiver)** — BR-101E supports Digital Terrestrial DVB-T Receptions (5/6/7/8 MHz bandwidth) and amateur HAM DVB-T TV reception (2/3/4 MHz bandwidth). BR-101J supports Digital Terrestrial ISDB-T/ISDB-Tb Receptions (6/7 MHz bandwidth).
- **Modulator (Transmitter)** — Direct digital conversion to 50~950MHz and 1200~1350 MHz for excellent signal quality.
- BR-101E supports configurable bandwidth from 2MHz to 8 MHz. BR-101J supports configurable bandwidth 6/7/8 MHz.
- **Channel Adaptation** — The input and out channels are totally independent. The new (Tx) channel's frequency, bandwidth, code rate, guard interval, FFT, constellation can be totally different from the original (Rx) one's. If the input channel data rate is less than the output, auto null-packet insertion will be done in the modulator. If the input channel data rate is larger, setting PID filter properly to filter out unwanted packets may avoid data overflow. PCR re-stamp mechanism is supported to keep the correctness of PCR when PID's filtered or null packets inserted.
- **Applications** — DVB-T/ISDB-T digital TV signal repeater/extender · DVB-T/ISDB-T closed circuit TV gap filler · Air to Cable/Cable to Air/Air to Air/Cable to Cable TV signal repeater

- RF connector: Tx: 75-Ω F (female) connector; Rx: 75-Ω IEC (female) connector
- Bandwidth — Transmitter: BR-101E (DVB-T): 2/3/4/5/6/7/8 MHz; BR-101J (ISDB-T/Tb): 6/7/8 MHz
- Bandwidth — Receiver: BR-101E (DVB-T): 2/3/4 MHz or 5/6/7/8 MHz *1; BR-101J (ISDB-T/Tb): 6/7 MHz
- FFT: 2K, 4K, 8K
- Constellation: 64QAM/16QAM/QPSK
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range — Transmitter: 50~950MHz and 1200~1350MHz, step size 1KHz
- Frequency range — Receiver: 50~950MHz, step size 1KHz
- RF Output Level: -4 dBm (104 dBuV) @ 50~950MHz; BR-101E/J: -45dBm @ 1.2G band *2; BR-101JH: -18dBm @ 1.2G band
- Digital Attenuator: Range: +6/-25dB *3, Step size 1dB
- MER: 28~33 dB Typically @50~950MHz; 25~30 dB Typically @1200~1350MHz
- Spectrum Shoulder (Adjacent channel): 45dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB
- USB port: USB 2.0 or USB 1.1
- Power: 5V DC 390mA
- Dimensions (LxWxH): 75 x 30 x 15mm (excluding power adaptor)

Note: 1 : Bandwidth 2/3/4 MHz or 5/6/7/8 MHz are selected by a jumper.
Note: 2 : BR-101E/J U-band low pass filter is designed @950MHz, so 1.2G band power is filtered to such a low level.
Note: 3 : There could be MER loss in high gain/attenuation level.

### 08 · Up / Down Converter (2)

#### BD-300 — Dual-Band (1.2G/2.4G) Programmable LO Down Converter

Page: https://hides.com.tw/en/ham/catalog/bd-300/ · https://hides.com.tw/ham/catalog/bd-300/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_BD300_eng.html (archive, noindex)

1.2GHz / 2.4GHz down converter with programmable LO

BD-300 is a digitally controlled dual-band down converter with a programmable local oscillator from 1050 to 2300 MHz. It accepts 2.4GHz (2350~2500 MHz) and 1.2GHz (1200~1350 MHz) inputs, and can be powered either from the RF cable (+12V) or from the USB connector (+5V).

Key specs: 2.4GHz in: 2350–2500 MHz · 1.2GHz in: 1200–1350 MHz · LO: 1050–2300 MHz (typ. 1800)

Features:
- Digital control down converter with programmable LO frequency 1050~2300MHz.
- **Power source** — From RF cable (+12V) · From USB connector (+5V)
- Input frequency for 2.4GHz port: 2350~2500MHz
- Input frequency for 1.2GHz port: 1200~1350MHz
- 2.4GHz LNA gain: 10dB
- 1.2GHz LNA Gain: 10dB
- 2.4GHz Noise Figure: 2dB
- 1.2 GHz Noise Figure: 1.5dB
- Pmax: -10 dBm
- Recommended 2.4GHz < -15 dBm, 1.2GHz < -25 dBm

- Current consumption (Down Converter): 240–310 mA (5V supply)
- Frequency Range — 2.4GHz LNA: 2350–2500 MHz
- Frequency Range — 1.2GHz LNA: 1200–1350 MHz
- LO Frequency Range: 1050–2300 MHz (typ. 1800)
- Input P1dB — 2.4GHz: -6 dB (typ.)
- Input P1dB — 1.2GHz: -8.5 dB (typ.)
- Noise Figure — 2.4GHz: 1.5–2.5 dB
- Noise Figure — 1.2GHz: 1–1.5 dB
- Internal TCXO: 20 MHz (typ.)
- Phase Noise LO=1840MHz: -111 dBc/Hz (typ., 100kHz offset)
- Phase Noise LO=1330MHz: -114 dBc/Hz (typ., 100kHz offset)
- Ambient Operating Temperature: -20 to +80 ºC

Note: Tamb = 25 ºC; typical values at VCC = 3.3 V; ZS = ZL = 50
Note: Source correction: the 2012 parameter table listed the 2.4GHz LNA range as 2400~2500MHz, disagreeing with the features list (2350~2500MHz). HiDes confirmed 2350MHz is correct (2026-07-25); the table figure was an error in the original datasheet and both now read 2350~2500MHz.

#### BU-500 — 13 cm Up-Converter

Page: https://hides.com.tw/en/ham/catalog/bu-500/ · https://hides.com.tw/ham/catalog/bu-500/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_eoa100_eng.html (archive, noindex)

Excellent 13cm UP converter for SSB CW FM FM-ATV DVB

The BU-500 is a 13 cm up-converter for SSB, CW, FM, FM-ATV and DVB operation. It takes a 100~1300MHz IF input and converts it to 2365~2500MHz with more than 34dB of conversion gain, which makes it a good match for QO-100, the first geostationary satellite with a HamRadio transponder. The local oscillator defaults to 1968MHz for a 70cm IF signal and is customer-configurable from 1050MHz to 2700MHz in 1kHz steps. The same page also documents the companion HPA2225 13cm band high gain PA.

Key specs: RF in 100–1300 MHz, RF out 2365–2500 MHz · Conversion gain > 34 dB · 1700 mW (SSB/CW/FM/ATV), 200 mW (DVB)

Features:
- **Built for QO-100** — Good for QO-100, the first geostationary satellite with a HamRadio transponder.
- **Configurable local oscillator** — Default 1968MHz for 70cm IF signal, configurable by the customer from 1050MHz to 2700MHz in 1kHz step. Local Oscillator TK stability 2.5ppm (-30°…+75°C); for even more stability, an external 10MHz input is available.
- **Two IF input versions — check before ordering** — -15dBm and +20dBm IF version (please check your version before using it). Version 1 for multi-mode SSB CW FM ATV D-ATV, with input around -15dBm. Version 2 for SSB CW FM, with input around +20dBm (attenuator on PCB included). Please note the version you would like to buy.
- **Rx/Tx switching** — For the Rx <---> Tx switch, please use the IF signal.
- **HPA2225 — companion 13cm band high gain PA** — Amplification of signals with all types of modulation. Very suitable for transmitters with very low RF transmission output power (under 1mW output), such as Adalm Pluto or similar. The output port is protected by a circulator.

- RF-in: 100~1300MHz
- Local Oscillator: Default 1968MHz for 70cm IF signal; 1050MHz to 2700MHz (configurable by customer in 1kHz step)
- Local Oscillator TK stability: 2.5ppm (-30°…+75°C); external 10MHz input available for even more stability
- RF-output: 2365~2500MHz
- Conversion Gain: > 34dB
- Output power: 1700mW (SSB CW FM ATV FMATV); 200mW (DVB-T DVB-S)
- DC power adaptor: 12V 1A (9V…13.8V)
- IF input version: -15dBm and +20dBm IF version

- Bandwidth: 2200…2500MHz
- Gain: >50dB & 40,0W output
- Small signal gain: >54dB
- CW mode output: up to 40,0 Watt
- Output port: Protected by circulator
- INP / OUT / RFmonitor connector: SMA female
- RF input power max.: 2mW
- Voltage: 24…30 Volt, typical 28V, Icc 4 Amper max.

Note: For the Rx <---> Tx switch, please use IF signal.
Note: -15dBm and +20dBm IF version (please check your version before using it). Version 1 for multi-mode SSB CW FM ATV D-ATV, with input around -15dBm. Version 2 for SSB CW FM, with input around +20dBm (attenuator on PCB included). Please note the version you would like to buy.

### 09 · Chipset & Software (2)

#### IT9500 / IT9510 / IT9560 — DVB-T / ISDB-T Transmitter & Transceiver ICs

Page: https://hides.com.tw/en/ham/catalog/ite-chipset/ · https://hides.com.tw/ham/catalog/ite-chipset/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_IC_eng.html (archive, noindex)

ITE DVB-T / ISDB-T chipset family: the IT9500 DVB-T transmitter IC, the IT9510 DVB-T/ISDB-T transmitter IC, and the IT9560 COFDM transceiver IC with integrated RF front-end.

- : ETSI, DVB-T/H (EN 300 744 V1.5.1) Compliant baseband transmitter for Digital Terrestrial Television
- : Configurable code rate: 1/2,2/3,3/4,5/6,7/8
- : Programmable QPSK, 16-QAM and 64-QAM Symbol Mapping
- : Configurable support for 2k and 8k FFT
- : Programmable Guard Interval (1/4, 1/8, 1/16, 1/32)
- : Supports variable channel bandwidth from 1 MHz to 8 MHz
- : Zero I/F complex base band I/Q output with integrated DAC and anti-aliasing filter
- : MER > 40 dB
- : Carrier Suppression > 50 dB
- : Spectrum Shoulders: 55 dB for perfect adjacent-channel operations

- : ETSI, DVB-T/H (EN 300 744 V1.5.1) and ISDB-T (ARIB STD-B31 V1.6) Compliant transmitter for Digital Terrestrial Television
- : Configurable code rate: 1/2,2/3,3/4,5/6,7/8
- : Programmable QPSK, 16-QAM and 64-QAM Symbol Mapping
- : Configurable support for 2k, 4k, and 8k FFT
- : Programmable Guard Interval (1/4, 1/8, 1/16, 1/32)
- : Supports variable channel band width from 1 MHz to 8 MHz
- : RF output or Zero I/F complex base band I/Q output with integrated DAC and anti-aliasing filter
- : MER > 40 dB with external LO/Mixer, > 30 dB with internal LO/Mixer
- : Carrier Suppression > 50 dB
- : Spectrum Shoulders: 55 dB for perfect adjacent-channel operations

- : COFDM Modulation and Demodulation
- : Integrated RF Front-end
- : Interfaces for Generic Data Transmission
- : Interfaces for Transparent Transmission
- : Compact for Application Designs
- Applications: Home automation and factory automation
- Applications: Industrial control
- Applications: Wireless RS232
- Applications: Wire-saving long-distance transmission of UART signals
- Applications: Sensor Networks
- Applications: General purpose wireless data communication

#### UT-100C OpenCaster SE — USB DVB-T Modulator Bundle (Tx only)

Page: https://hides.com.tw/en/ham/catalog/opencaster/ · https://hides.com.tw/ham/catalog/opencaster/ (zh)
Original 2012 page: https://hides.com.tw/legacy/product_opencaster_eng.html (archive, noindex)

The UT-100C OpenCaster special edition bundles HiDes' USB bus-powered DVB-T modulator with OpenCaster, a toolset for creating, managing and transmitting complex digital video streams compliant with MPEG and DVB standards. The bundle adds the UT-100C "tsrfsend" application, which is not part of the standard OpenCaster package.

Key specs: 50–950 MHz / 1200–1350 MHz · 2/3/4/5/6/7/8 MHz bandwidth · USB bus powered, DVB-T EN 300-744

Features:
- **OpenCaster — Features** — OpenCaster is a toolset for enabling creation, management and transmission of complex digital video streams compliant with MPEG and DVB standards. · Ready to go examples inside, with full source codes for study, reference and enhancement. · Target: developers, schools/universities, ICT firms, broadcasters. · Applications: Games, Infotainment, Poll, T-voting, T-commerce apps. · Registered users, in case of further interest and issues, will get support from Avalpa technical staff.
- **UT-100C — Features** — USB based modulator/demodulator with support for EN 300-744 DVB-T transmission and reception. · Powered from the USB bus, so no external power adapter is required. · Full hardware modulation/demodulation, no host CPU computation required.
- **Modulator (Transmitter)** — Direct digital conversion to 50~950MHz and 1200~1350 MHz for excellent signal quality. · Support only non-hierarchy mode. · Programmable digital attenuator. · Free Windows Stream Player. · Free Windows and Linux SDK.
- **Host requirements** — CPU: Intel, AMD, ARM, MIPS · 128MB RAM of system memory or above · Higher CPU and memory required if DVB-T audio/video decoding is needed. · One available USB2.0 or 1.1 port (Note: USB 1.1 can only support 3~5 Mbps stream data rate).
- **Q: What exactly is the difference between the “plain” UT-100C and the OpenCaster bundle?** — As of now the OpenCaster release 3.2 is officially only available on the bundle package, because we want people subsidizing the open source project to get MORE value for their money. This is how free (as freedom) software can sustain itself.
- **Q: The OpenCaster software is open source and freely available, so does this mean there is some additional component delivered with this bundle which is not part of the standard OpenCaster?** — YES. The standard package is meant to use as TS source and sink the UDP transport. The UT100C application “tsrfsend” is only available on the bundle package. Of course it's still open source.

- RF Connector: 75-Ω MCX (female) connector
- Bandwidth: UT-100C 2/3/4/5/6/7/8 MHz
- FFT: 2K, 4K, 8K
- Constellation: 64QAM/16QAM/QPSK
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16 or 1/32
- Frequency range: 50~950MHz and 1200~1350MHz, step size 1KHz
- RF Output Level: 0 dBm (108 dBuV)
- Digital Attenuator: Range: +6/-25dB, Step size 1dB
- MER: 50~950MHz: 35dB Typically; 1200~1350MHz: 30dB Typically
- Spectrum Shoulder (Adjacent channel): 45dB
- Phase noise: <-92dBc @ 10kHz
- Carrier Suppression: >42dB
- USB port: USB 2.0 or USB 1.1
- Power: 5V DC (USB Bus Power), 340mA (Tx only)
- Dimensions (LxWxH): 75 x 30 x 15mm

Note: There could be MER loss in high gain/attenuation level.

---

Generated from the site's own content data at build time. 5 long-range products, 1 OEM module product, 41 DATV catalog products.