BR-100E DVB-T Digital Gap Filler/Repeater

 




                                                                                     


Ref. Price: US$239


Features

Hardware modulator and demodulator support EN 300-744 DVB-T /ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb reception and retransmission.
TV RF signal is demodulated to a transport stream (TS), and then modulated to a new TV RF signal with fully hardware digital processing without any MER loss or any noise addition.
Built-in 31-way PID filters and PCR re-stamp.
Infinite digital TV signal extension can be achieved with BR-100.

BR-100E supports EN 300-744 DVB-T while BR-100J supports ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb.

BR-100EH is a special edition of BR-100E for HAM TV application; BR-100EH can support up to 1.2G band with high RF power (-18dBm), but 2’nd and 3’rd harmonic in 950MH~1350MHz band is not well filtered.

Demodulator (Receiver):

BR-100E supports Digital Terrestrial DVB-T Receptions (5/ 6 / 7 / 8 MHz bandwidth) and amateur HAM DVB-T TV reception (2/3/4 MHz bandwidth)

BR-100J supports Digital Terrestrial ISDB-T/ISDB-Tb Receptions (6 / 7 MHz bandwidth)

Modulator (Transmitter):

Direct digital conversion to 50~950MHz and 1200~1350 MHz for excellent signal quality
BR-100E supports configurable bandwidth from 2MHz to 8 MHz.
BR-100J supports configurable bandwidth 6/7/8 MHz.

 

Channel Adaptation:
The input and out channels are totally independent. The new (Tx) channel’s frequency, bandwidth, code rate, guard interval, FFT, constellation can be totally different from the original (Rx) one’s.
BuiltDirect digital conversion to 50~950MHz and 1200~1350 MHz for excellent signal quality
If the input channel data rate is less than the output, auto null-packet insertion will be done in the modulator.
If the input channel data rate is larger, setting PID filter properly to filter out unwanted packets may avoid data overflow.
PCR re-stamp mechanism is supported to keep the correctness of PCR when PID’s filtered or null packets inserted.

 

BR-100 - Applications

DVB-T/ISDB-T digital TV signal repeater/extender
DVB-T/ISDB-T closed circuit TV gap filler
• Air to Cable/Cable to Air/Air to Air/Cable to Cable TV signal repeater

Parameter

Value

RF connector

Tx: 75-Ω F (female) connecter
Rx: 75-Ω IEC (female) connecter

Bandwidth

Transmitter

BR-100E DVB-T
2/3/4/5/6/7/8 MHz
BR-100J ISDB-T/Tb
6/7/8 MHz
Receiver BR-100E DVB-T
2/3/4 MHz or
5/6/7/8MHz *1
BR-100J ISDB-T/Tb
6/7 MHz

FFT

2K, 4K, 8K

Constellation

64QAM/16QAM/QPSK

Code rate 1/2, 2/3, 3/4, 5/6, 7/8
Guard interval 1/4, 1/8, 1/16 or 1/32
Frequency range Transmitter 50~950MHz and 1200~1350MHz
step size 1KHz
Receiver 50~950MHz, step size 1KHz
RF Output Level -4 dBm (104 dBuV) @ 50~950MHz
-45dBm @ 1.2G band *2
Digital Attenuator Range:+6/-25dB*3 , Step size 1dB
MER >30dB Typically
Spectrum Shoulder (Adjacent channel) 45dB
Phase noise <-92dBc @ 10kHz
Carrier Suppression >42dB
USB port USB 2.0 or USB 1.1
Power 5V DC 390mA

Dimensions (LxWxH)

100x 130 x 35mm

       *1 : Bandwidth 2/3/4 MHz or 5/6/7/8 MHz are selected by a jumper.
       *2 :The U-band low pass filter is designed @950MHz, so 1.2G band power is filtered            to such a low level.
       *3:There could be MER loss in high gain/attenuation level.

Gap Filler Application