DC-103
DTV Camera Transmitter
DTV CAM is an all-new camera which outputs the captured HD video in digital TV signal. The core technology is based on open industrial standard EN 300-744 DVB-T, which can transmit compressed high-definition digital video over cable or air.
70-450 MHz, 850-950 MHz · 1/2/3/4/5/6/7/8 MHz · 0 dBm @177 MHz -3.5 dBm @430 MHz -14 dBm @915 MHz
Datasheet — DC-103
06 · DTV Camera Series
Features
- 01 Painless upgrade to full HD
- 02 Long Distance
- 03 Daisy-Chain Connection (Bus-Topology)
- 04 Standard 38mmx38mm form factor design
Specifications
Order Information:
- Model — Photo
- Description
- DC-103/DC-103H
- 1920x1080x30P DTV CAM
- DC-103-BB/DC-103H-BB
- DC-103 bare bone only
General Camera Specifications:
- Video
- Image Sensor / DC-103 / 1/2.8" SONY Exmor CMOS 2 Megapixels Progressive image Sensor
- Video — Resolution — DC-103
- 2 Megapixel 1920 x 1080
- Video — Resolution — Default Video Streams — DC-103
- 1920x1080x30P
- Video — Default Video Streams — Video Compression — DC-103
- H.264 up to 1920x1080x30P
- Video — Video Compression — Video Transmission Protocol
- DVB-T EN-300 744
- Video — Shutter Control
- 1/25 to 1/10,000 second，1/30 to 1/10,000 second
- Video — Auto Gain Control
- AUTO
- Video — White Balance
- AUTO
- Video — Back Light Compensation
- AUTO
- Video — Day & Night
- AUTO
- Video — Scanning System
- Progressive
- Video — S/N Ratio
- 44 dB
- Video — Lens
- Board Mount 6 mm
- Video — Audio
- Input / DC-103BB / Condenser microphone
- Video — Audio — DC-103
- 3.5 Phone Jack
- Video — Audio — Compression
- AAC (Optional)
- Video — Power — Power Supply
- DC 12V+/-10%
- Power — Power Consumption — DC-103
- 280mA@12V
- Power — Power Consumption — Dimension
- 49mmx 38mm x 38mm (LxWxH, excluding lens and power adaptor)
- Weight — DC-103BB (bare bone only w/o housing)
- 50g
- Weight — Operating Temperature
- 0° C to 40° C
DVB-T RF Transmitter Specifications:
- RF connector
- On-board: 1.0/2.3 DIN female 50-Ω External cable: SMA-type 50-Ω connector
- Bandwidth
- 1/2/3/4/5/6/7/8 MHz
- Constellation
- QPSK and 16QAM
- FFT
- 2K, 8K
- Code rate
- 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval
- 1/4, 1/8, 1/16 or 1/32 (In 16QAM mode, only Guad Interval 1/4 and 1/8 are supported)
- Frequency range
- Channel setting by UART Channel Configuration
- Frequency range — DC-103
- 70-450 MHz, 850-950 MHz
- Frequency range — DC-103H
- 70-450 MHz, 850-950 MHz, 1.2G
- RF Output Level
- 0 dBm @177 MHz -3.5 dBm @430 MHz -14 dBm @915 MHz
- Digital Amplifier/Attenuator
- Range:+6/-25 dB , Step size 1 dB
- MER
- 25 dB @177 MHz 28 dB @430 MHz 25 dB @915 MHz
- Spectrum Shoulder (Adjacent channel)
- 45 dB
- Phase noise
- <-92dBc @ 10 kHz
- Carrier Suppression
- >42 dB
- There could be MER loss in high gain/attenuation level.
- All the above configurable settings can also be set by PC tool kit with return channel card (optional).
- Special edition available for 1.2G (1200–1350 MHz) band support
Availability varies by model — current-production gear is in the eBay store, and every page links to its original write-up on the old site. Original product page →
https://hides.com.tw/en/ham/catalog/dc-103/ · +886-2-2917-2417 · info@hides.com.tw